P11P, P11D www.vishay.com Vishay Sfernice 12.5 mm Modular Panel Potentiometer High Dielectric Strength FEATURES • High dielectric strength potentiometer up to 5000 VRMS • 12.5 mm square single turn panel control • Plastic shaft and bushing • Two shaft lengths and 29 terminal styles • P11P: Cermet element • P11D: Conductive plastic element • Multiple assemblies - up to seven modules • Test according to CECC 41000 or IEC 60393-1 • Shaft and panel sealed version • Up to twenty-one indent positions • Rotary switch options • Custom designs on request • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 VERSATILE MODULAR COMPACT ROBUST CONFIGURATION EXAMPLE - Dimensions in millimeters (inches) ± 0.5 mm (± 0.02") Single module, single shaft, solder lugs, metric bushing and shaft 13.1 (0.516) 12.5 (0.492) 2.4 (0.094) 1.8 (0.071) 12.5 (0.492) 6.8 (0.27) 8 (0.315) Ø 6.35 (Ø 0.25) 9.5 (0.374) 22.2 (0.874) 4.65 (0.183) 4.9 (0.193) A 0.9 (0.035) 7.07 (0.278) 4.65 (0.183) DETAIL A 12.7 (0.5) Single module, single shaft, vertical mounting, PC pins with support plate, metric bushing and shaft 3/8-32 UNEF 2A 2.54 (0.1) 2.54 (0.1) Ø 6.35 (Ø 0.25) Dual modules, single shaft, PC pins with front support plates, imperial bushing and shaft 9.5 (0.374) 12.5 (0.492) 13.1 (0.516) 3/8-32 UNEF 2A 3.6 (0.14) 15.8 (0.624) Revision: 24-Sep-15 3.8 (0.15) 2.54 (0.1) 2.54 (0.1) Document Number: 51059 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11P, P11D www.vishay.com Vishay Sfernice GENERAL SPECIFICATIONS ELECTRICAL (initial) Resistive element P11D P11P Conductive plastic Cermet Electrical travel 270° ± 10° 270° ± 10° 1 k to 1 M 20 to 10 M 470 to 500 k 100 to 2.2 M Linear taper Resistance range (1) Non-linear taper Standard Tolerance ± 20 % ± 20 % - ± 5 % or ± 10 % On request 90 % F S R Vs % 50 % Ve A W 20 % 10 % Taper L 50 % 15° Electrical travel 270 °C 15° 31° Electrical travel with switch 238° 31° Mechanical travel 300 °C c a Circuit diagram (3) (1) b (2) cw Linear taper 0.5 W at +70 °C 1 W at +70 °C Non-linear taper 0.25 W at +70 °C 0.5 W at +70 °C 0.25 W at +70 °C per module 0.5 W at +70 °C per module Rated Power (W) Multiple assemblies Power rating at 70 °C 1.25 P11P Linear Taper 1 0.75 P11P Non-Linear Taper 0.5 P11D Linear Taper 0.25 P11D Non-Linear Taper 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 Ambient Temperature (°C) Temperature coefficient, -40 °C to +100 °C (typical) ± 500 ppm ± 150 ppm 350 V 350 V Limiting element voltage End resistance (typical) Contact resistance variation (typical) Linear taper Independent linearity (typical) Linear taper Mechanical endurance 2 1% 2 % or 3 ±5% ±5% 106 M min. 106 M min. Leads to support plate 3000 VRMS min. 3000 VRMS min. Leads to shaft and bushing 5000 VRMS min. 5000 VRMS min. 50 000 cycles 50 000 cycles Insulation resistance Dielectric strength 2 Notes • Nothing stated herein shall be construed as a guarantee of quality or durability. (1) Consult Vishay Sfernice for other ohmic values Revision: 24-Sep-15 Document Number: 51059 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11P, P11D www.vishay.com Vishay Sfernice MECHANICAL (initial) Mechanical travel 300° ± 5° Operating torque (typical) Single and dual assemblies Three to seven modules (per module) 0.2 Ncm to 1 Ncm max. (0.3 oz.-inch to 1.4 oz.-inch max.) 0.2 Ncm to 0.3 Ncm max. (0.3 oz.-inch to 0.45 oz.-inch max.) End stop torque 80 Ncm max. (6.8 lb-inch max.) Tightening torque 150 Ncm max. (13 lb-inch max.) Weight Single assemblies 3.5 g Two to seven modules (per module) 1.5 g to 2 g (0.25 oz. to 0.32 oz.) ENVIRONMENTAL SPECIFICATIONS Operating temperature range P11D P11P -40 °C to +100 °C -40 °C to +100 °C 40/100/21 40/100/56 Climatic category Sealing Storage temperature MARKING IP64 IP64 -40 °C to +100 °C -40 °C to +100 °C PACKAGING • Potentiometer module Vishay logo, nominal ohmic value (, k, M), two stars identify P11D version, tolerance in % - variation law, manufacturing date (four digits), “3” for the lead 3 • Switch module Version, manufacturing date (four digits), “c” for common lead • Box • Indent module Version, manufacturing date (four digits) PERFORMANCES TESTS TYPICAL VALUE AND DRIFTS CONDITIONS RT/RT P11D P11P ± 10 % ±2% 1000 h at rated power 90’/30’ - ambient temp. 70 °C Contact resistance variation ±5% ±4% Change of temperature -40 °C to +100 °C, 5 cycles RT/RT ± 0.5 % ± 0.2 % Damp heat, steady state +40 °C, 93 % relative humidity P11P: 56 days, P11D: 21 days RT/RT ±5% ±2% Insulation resistance > 10 M > 1000 M Electrical endurance RT/RT ±6% ±5% Contact resistance variation ±4% ±5% Dry heat at +125 °C/damp heat cold -55 °C/damp heat, 5 cycles RT/RT - ±1% Shock 50 g’s, 11 ms 3 shocks - 3 directions RT/RT ± 0.2 % ± 0.2 % R1-2/R1-2 ± 0.5 % ± 0.5 % Vibration 10 Hz to 55 Hz 0.75 mm or 10 g’s, 6 h RT/RT ± 0.2 % ± 0.2 % V1-2/V1-3 ± 0.5 % ± 0.5 % Mechanical endurance Climatic sequence 50 000 cycles Revision: 24-Sep-15 Document Number: 51059 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11P, P11D www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) P 1 1 P 2 MODEL STYLE P11 P = cermet element F 0 NUMBER OF MODULES G G BUSHING S Y OPTION 0 0 SHAFT 1 SHAFT STYLE 0 LEADS 3 M A RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL 1 2 3 4 5 6 7 D = conductive plastic (audio) STANDARD RESISTANCE ELEMENT DATA P11P CERMET P11D CONDUCTIVE PLASTIC LINEAR TAPER NON LINEAR TAPER LINEAR TAPER NON LINEAR TAPER STANDARD RESISTANCE MAX. MAX. MAX. CUR. MAX. MAX. MAX. CUR. MAX. MAX. MAX. CUR. MAX. MAX. MAX. CUR. VALUES POWER WORKING THROUGH POWER WORKING THROUGH POWER WORKING THROUGH POWER WORKING THROUGH AT 70 °C VOLTAGE WIPER AT 70 °C VOLTAGE WIPER AT 70 °C VOLTAGE WIPER AT 70 °C VOLTAGE WIPER W V mA 22 1 4.69 213 47 1 6.86 146 50 1 7.07 141 100 1 10.0 220 1 470 1 500 W V mA W V mA W V mA 100 0.5 7.07 70.7 14.8 67.4 0.5 10.0 47.7 21.7 46.1 0.5 15.3 32.6 1 22.4 44.7 0.5 15.8 31.6 1K 1 31.6 31.6 0.5 22.4 22.4 0.5 22.4 22.4 0.25 11.2 22.4 0.25 15.8 2.2K 1 46.9 21.3 0.5 33.2 15.1 0.5 33.2 15.8 15.1 0.25 23.5 4.7K 1 63.6 14.5 0.5 48.5 10.3 0.5 10.7 48.5 10.3 0.25 34.3 5K 1 70.7 14.1 0.5 50.0 10.0 7.29 0.5 50.0 10.0 0.25 35.4 10K 1 100 10.0 0.5 70.7 7.07 7.07 0.5 70.7 7.07 0.25 50.0 5.00 22K 47K 1 148 6.74 0.5 1 217 4.61 0.5 105 4.77 0.5 105 4.77 0.25 74.2 3.37 153 3.26 0.5 153 3.26 0.25 108 50K 1 224 4.47 2.31 0.5 158 3.16 0.5 158 3.16 0.25 112 100K 1 316 2.24 3.16 0.5 224 2.24 0.5 224 2.24 0.25 158 220K 0.56 1.58 350 1.59 0.5 332 1.51 0.5 332 1.51 0.25 235 470K 1.07 0.26 350 0.75 0.26 349 0.74 0.26 350 0.74 0.25 343 0.73 500K 0.25 350 0.70 0.25 350 0.70 0.25 350 0.70 0.25 350 0.70 1M 0.12 350 0.35 0.12 350 0.35 0.12 350 0.35 2.2M 0.56 350 0.16 0.056 350 0.16 4.7M 0.26 350 0.074 5M 0.25 350 0.070 10M 0.12 350 0.035 Revision: 24-Sep-15 Document Number: 51059 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11P, P11D www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) P 1 MODEL 1 STYLE P 2 F NUMBER OF MODULES 0 G G S BUSHING P11 F Y OPTION Ø L 3/8" 3/8" 0 0 SHAFT SHAFT STYLE 1 0 LEADS 3 M A RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL BUSHING DIMENSIONS - Dimensions in mm (inches) ± 0.5 mm (± 0.02") 10.83 (0.426) Ø 6.35 (Ø 0.25) 3/8" - 32 UNEF 9.5 (0.374) 7.07 (0.278) PANEL CUT OUT - Dimensions in mm (inches) ± 0.5 mm (± 0.02") 8.2 (0.323) Ø 10 (Ø 0.394) Note • Hardware supplied in separate bags Revision: 24-Sep-15 Document Number: 51059 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11P, P11D www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) P 1 MODEL 1 P 2 NUMBER OF MODULES STYLE F 0 G G BUSHING S Y OPTION 0 0 SHAFT STYLE SHAFT 1 0 LEADS 3 M A RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL Location pegs: mm Ø L A 2 6.2 B 2 7.75 C 3.5 13.5 0 Without peg Sealed version: P Panel and shaft sealed LOCATING PEGS (anti-rotation lug) The locating peg is provided by a plate mounted on the bushing and positioned by the module sides. Four set positions are available, clock face orientation: 12, 3, 6, 9. Bushings have a double flat. When panel mounting holes have been punched accordingly, an anti-rotation lug is not necessary. CODE Ød (mm) L (mm) EFFECTIVE HIGH PEG A 2 6.2 0.7 B 2 7.75 0.7 C 3.5 13.5 1.1 L 12 3 9 ØD 6 Ød PANEL AND SHAFT SEALED 8.3 (0.327) 8.3 (0.326) O ring plate can not be used with locating pegs. Note • Locating pegs and panel o ring are supplied in separate bags with nuts and washers Revision: 24-Sep-15 Document Number: 51059 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11P, P11D www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) P 1 MODEL 1 STYLE P NUMBER OF MODULES 2 F BUSHING 0 G G S Y 0 0 SHAFT SHAFT STYLE CODE L (inch) L (mm) S = Slotted OPTION GG 5/8 15.8 GJ 7/8 22.2 1 0 LEADS 3 M A RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL SHAFTS - Dimensions in mm (inches) ± 0.5 mm (± 0.02") The shaft length are always measured from the mounting face. Shafts are designed by a 3 letter code (3 digits). Shafts are slotted and aligned to ± 10° of the wiper position. 1.6 (0.063) Ø 6.35 (Ø 0.25) 1.2 (0.047) Mounting face L 7.07 (0.278) Revision: 24-Sep-15 Document Number: 51059 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11P, P11D www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) P 1 MODEL 1 P NUMBER OF MODULES STYLE 2 F 0 BUSHING G G OPTION S SHAFT Y 0 0 SHAFT STYLE 1 0 3 M A RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL LEADS Available leads A00 W00 X00 Y00 Z00 A10 W10 X03 Y03 Z03 A13 W20 X04 Y04 Z04 A14 X10 Z10 A20 X13 Z13 A23 X14 Z14 A24 X20 Z20 X23 Z23 X24 Z24 FIRST DIGIT Soldering lugs PCB pins PCB pins with front support plate PCB pins with front and back support plates PCB pins - vertical mounting with 2 extra pins - 1 module only Y X Z A W SECOND DIGIT 0 1 2 0 3 4 Y = 4.65 (0.183") A, X, Z, W = 5.08 (0.200") pin spacing pins section 0.9 x 0.3 (0.035" x 0.012") THIRD DIGIT 5.08 (0.200") space between modules 7.62 (0.300") space between modules 10.16 (0.400") space between modules 2.54 (0.100") pin spacing pin section 0.6 x 0.3 (0.024" x 0.012") 5.08 (0.200") pin spacing pins section 0.6 x 0.3 (0.024" x 0.012") DIMENSIONS in millimeters (inches) ± 0.5 mm (± 0.02") SOLDER LUGS Y PCB PIN OUT 12.5 (0.492) 6.85 (0.270) 3.71 (0.146) J 12.5 (0.492) 13 (0.512) 4.7 (0.185) 4.7 (0.185) 5 (0.197) 1.8 (0.07) 2.4 (0.09) 0.9 0.9 (0.035) (0.035) X-X2 X1 1 2 3 123 5.08 (0.200) VERTICAL MOUNTING HORIZONTAL MOUNTING FRONT AND REAR SUPPORT PLATES 2.54 (0.100) A FRONT SUPPORT PLATE B 12.7 (0.500) Rear suppots plate Z Z1 Z2 C W-W2 E 6.35 (0.250) F 1 2 3 A1 A/A2 1 2 3 3.81 (0.150) 3.81 (0.150) 5.08 (0.200) 123 5.08 (0.200) 2.54 (0.100) 4 (0.157) K W1 1 2 3 3.81 (0.150) 3.81 (0.150) 12.7 (0.500) 1 23 5.08 (0.200) 5.08 (0.200) 12.7 (0.500) 12 3 2.54 (0.100) THE POSITION OF EACH MODULE IS FREE LEADS X../Y.. A../Z1./Z2. Z0. (except with rotary switch) Z0. (with rotary switch) E - 3.63 (0.14) 3.81 (0.15) 2.15 (0.085) F - 3.81 (0.15) 5.08 (0.20) 5.08 (0.20) J 7.06 (0.278) - - - Revision: 24-Sep-15 Document Number: 51059 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11P, P11D www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) P 1 MODEL 1 STYLE P 2 NUMBER OF MODULES F 0 BUSHING G G LOCATING PEG S SHAFT Y 0 SHAFT STYLE 0 1 LEADS 0 3 M A RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL From 20 to 10 M see instructions on electrical specifications Resistance code: 200 = 20 to 106 = 10 M Tolerance code: standard: M = ± 20 % on request: K = ± 10 %, J = ± 5 % (cermet only) Taper: A, L, W, F, S, R or special code given by Vishay SPECIAL CODES GIVEN BY VISHAY Option available: • • • • • Custom design on request Specific linearity Specific interlinerarity Specific taper Multiple assemblies with various modules Revision: 24-Sep-15 Document Number: 51059 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11P, P11D www.vishay.com Vishay Sfernice P11 OPTION: ROTARY SWITCH MODULES • Rotary switch • Current up to 2 A • Actuation CW or CCW position • Sealing IP60 MODULES: RS ON/OFF SWITCH RSI CHANGEOVER SWITCH The position of each module is free. RS and RSI rotary switches are housed in a standard P11 module size 12.7 mm x 12.7 mm x 5.08 mm (0.5" x 0.5" x 0.2"). They have the same terminal styles as the assembled electrical modules. An assembly can comprise 1 or more switch modules. Switch actuation is described as seen from the shaft end. D: Means actuation in maximum CCW position F: Means actuation in maximum CW position SWITCH SPECIFICATIONS Switching power maximum 62.5 VA 15 VA = Switching current maximum 0.25 A 250 V 0.5 A 30 V = Maximum current through element Dielectric strength 100 m Terminal to terminal 1000 VRMS Terminal to bushing 5000 VRMS 250 V 30 V = Maximum voltage operation The switch actuation travel is 25° with a total mechanical travel of 300° ± 5° and electrical travel of electrical modules is 238° ± 10°. Insulation resistance between contacts Leads finish: gold plated Minimal travel RDS SINGLE POLE SWITCH, NORMALLY OPEN Operating temperature In full CCW position, the contact between 1 and 3 is open. It is made at the beginning of the travel in CW direction. ELECTRICAL DIAGRAM RSF SINGLE POLE SWITCH, NORMALLY OPEN In full CW position, the contact between 1 and 3 is open. It is made at the beginning of the travel in CCW direction. 2A Contact Resistance Life at Pmax. 106 M 10 000 actuations RSD RSF 25° -40 °C to +85 °C RSID CCW POSITION RSIF CW POSITION RSID SINGLE POLE CHANGEOVER In full CCW position, the contact is made between 3 and 2 and open between 3 and 1. Switch actuation (CW direction) reverses these positions. RSIF SINGLE POLE CHANGEOVER In full CW position, the contact is made between 1 and 2 and open between 1 and 3. Switch actuation (CCW direction) reverses these positions. 1 3 1 2 3 (1) 1 (1) 2 3 Note (1) Common ORDERING INFORMATION (First order only) RSID RSD SPST: Single pole, open switch in CCW position - 2 pins RSF SPST: Single pole, open switch in CW position - 2 pins RSID SPDT: Single pole, changeover switch in CCW position - 3 pins RSIF SPDT: Single pole, changeover switch in CW position - 3 pins Revision: 24-Sep-15 Document Number: 51059 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11P, P11D www.vishay.com Vishay Sfernice P11 OPTION: DETENT MODULES The detents mechanism is housed in a standard P11 module. Up to 21 detent positions available. α Count detents as follows: 1 for CCW position, 1 for full CW position, plus the other positions forming equal resistance increments (linear taper) - not equal angles. β β Available: CVID - CVIF - CVIM CV3 - CV11 - CV21 CVID CVIM CVIF CV11 ° α = n270 -1 β = α + 15° Mechanical endurance: 10 000 cycles ORDERING INFORMATION (First order only for special code creation) CV1M CV1M CV1M J84 CV1D CV1F CV3 CV11 CV21 1 detent at half travel CV1M with accuracy of center point ± 2 % (all tapers except S) 1 detent at CCW position 1 detent at CW position 3 detents 11 detents 21 detents P11 OPTION: NEUTRAL MODULES “EN” Neutral or screen module is housed in a standard P11 module. It is used as a screen between two electrical modules. The leads can be connected to ground. ORDERING INFORMATION (first order only for special code creation) EN EN Neutral module P11 OPTION: CENTER CURRENT TAP “J” The extra terminal is a solder lug connected at 50 % of electrical travel and siluated in the potentiometer module opposite the terminals. Center tap presents a short circuit of 11° of travel. 100 % 50 % • Sealing IP60 0% 11° ORDERING INFORMATION (First order only) J J Center tap Revision: 24-Sep-15 Document Number: 51059 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11P, P11D www.vishay.com Vishay Sfernice P11 OPTION: SPECIAL LINEARITY - CONFORMITY E V The independent linearity (conformity for the non linear laws) is the maximum gap V between the actual variation curve and the theoretical variation curve the nearest to it. The linearity and the conformity are expressed in percentage of the total applied voltage E ± V max. linearity conformity = ---------------------- E V They are measured over 90 % of actual electrical travel (centered). Limits of linearity test Effective electrical travel Degrees On request linearity can be guaranteed in linear law. ORDERING INFORMATION (First order only) J123 J123 J145 Independent linearity ± 3 % (linear taper) Independent linearity ± 2 % (linear taper) For other request, contact us. P11 OPTION: SPECIAL INTERLINEARITY - INTERCONFORMITY E V C V1 V2 Limits of test Effective electrical travel V1 Degrees V2 It is the maximum deviation between the actual voltage outputs of 2 or more pot modules in the same assembly. It is expressed as a percentage of the total applied voltage, or in dB attenuation. Interlinearity is measured between 2 pot modules, over 20 to 90 % of the attenuation. The interlinearity or interconformity is expressed as a percentage of the total applied voltage: C I % = ------E Or in decibels by comparison between outputs V1 and V2 V1 I dB = 20 log -----V2 ORDERING INFORMATION (First order only) J44 J44 Interlinearity ± 2 % (linear taper) For other request, contact us. Revision: 24-Sep-15 Document Number: 51059 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11P, P11D www.vishay.com Vishay Sfernice EXAMPLES OF FIRST ORDER INFORMATION FIRST EXAMPLE: Triple module (switch is counted as a module) P 1 MODEL P11 1 STYLE P P 3 3 MODULES F 0 BUSHING F (Ø 3/8"/ L 3/8") G G S WITHOUT LOCATING PEG Y 0 SHAFT SLOTTED (L 5/8") 0 SOLDER LUGS SPECIAL TO BE DEFINED BY VISHAY ORDERING INFORMATION: PART NUMBER P11P3F0GGSY00..... SHAFT AND BUSHING See drawing of special shaft attached MODULE NO. 1 RSID MODULE NO. 2 103 M A J123 MODULE NO. 3 503 M A J PART NUMBER DESCRIPTION (used on some Vishay document or label, for information only) P11P 3 F 0 GG S Y00 10K 20 % A MODEL MODULES BUSHING OPTION SHAFT SHAFT STYLE LEADS VALUE TOL. TAPER e3 SPECIAL SPECIAL LEAD (Pb)-FREE RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 24-Sep-15 Document Number: 51059 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000