VISHAY P11

P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VERSATILE
12.5 mm square single turn panel control
Five shaft diameters and 29 terminal styles
RoHS
Multiple assemblies - up to seven modules
COMPLIANT
Tests according to CECC 41 000
GAM T1
P11S version for industrial, military and aeronautics
applications
P11A version for professional audio applications
Low current compatibility
Shaft and panel sealed version
Up to twenty-one indent positions
Rotary and push/push switch options
Concentric shafts
Custom designs
Trimmer version T11 (see document no. 51021)
MODULAR
COMPACT
ROBUST
CONFIGURATION EXAMPLE
Single module, single shaft, solder lugs, metric bushing and shaft
12.5
(0.492)
M6 x 0.75
3
Ø (0.118)
8
(0.315)
22
(0.866)
1.8
(0.071)
5.07
(0.200)
6.85
(0.270)
12.5
(0.492)
2.4
(0.094)
0,9
(0.035)
13.1
(0.516)
5
(0.197)
4.65
(0.183)
DETAIL B
4.9
(0.193)
B
4.65
(0.183)
Single module, single shaft, vertical mounting, PC pins with support plate, metric bushing and shaft
M10 x 0.75
8
(0.315)
12.7
(0.500)
6
Ø (0.236)
9.5
(0.374)
2.54
(0.100)
16
(0.626)
2.54
(0.100)
Dual modules, single shaft, PC pins with front support plates, imperial bushing and shaft
9.5
(0.374)
12.5
(0.492)
3/8" x 3/8"
13.1
(0.516)
6.35
Ø (0.250)
3.6
(0.143)
19.05
(0.750)
www.vishay.com
1
8
(0.325)
7.62
(0.300)
For technical questions, contact: [email protected]
2.54
(0.100)
2.54
(0.100)
Document Number: 51031
Revision: 16-Jun-08
P11
12.5 mm Modular Panel Potentiometers
Vishay Sfernice
Cermet (P11S) or Conductive Plastic Elements (P11A)
GENERAL SPECIFICATIONS
ELECTRICAL (INITIAL)
Resistive Element
Electrical Travel
Resistance Range (1)
Tolerance
Power Rating at 70 °C
linear law
non linear law
standard
on request
linear law
non linear law
multiple assemblies
Temperature Coefficient (Typical)
Limiting Element Voltage
End Resistance (Typical)
Contact Resistance Variation
Independent Linearity (Typical)
Insulation Resistance
Dielectric Strength
Attenuation
Mechanical Rotation Life
linear law
linear law
P11A
Conductive plastic
270° ± 10°
1 kΩ to 1 MΩ
470 Ω to 500 kΩ
± 20 %
0.5 W at + 70 °C
0.25 W at + 70 °C
0.25 W at + 70 °C per module
± 500 ppm
350 V
2Ω
1%
±5%
106 MΩ min.
1500 VRMS min.
90 dB max./0.05 dB min.
50 000 cycles
P11S
Cermet
270° ± 10°
20 Ω to 10 MΩ
100 Ω to 2.2 MΩ
± 20 %
± 5 % or ± 10 %
1 W at + 70 °C
0.5 W at + 70 °C
0.5 W at + 70 °C per module
± 150 ppm
350 V
2Ω
2 % or 3 Ω
±5%
106 MΩ min.
1500 VRMS min.
50 000 cycles
Note:
(1) Consult Vishay Sfernice for other ohmic values
MECHANICAL (INITIAL)
Mechanical Travel
Operating Torque (Typical):
Single and Dual Assemblies:
3 mm, 4 mm (1/8") Dia. Shafts
6 mm (1/4") Dia. Shafts
Three to Seven Modules (Per Module):
End Stop Torque (All Bushing Except G)
3 mm, 4 mm (1/8") Dia. Shafts
6 mm (1/4") Dia. Shafts
End Stop Torque for Bushing G
All Shafts Dia.
Tightening Torque
6 mm, 7 mm (1/4") Dia. Bushings
10 mm (3/8") Dia. Bushings
Weight
300° ± 5°
0.5 to 1.3 Ncm max. (0.7 to 1.8 oz.-inch max.)
0.7 to 1.5 Ncm max. (1.0 to 2.1 oz.-inch max.)
0.2 to 0.3 Ncm max. (0.3 to 0.45 oz.-inch max.)
25 Ncm max. (2.1 lb-inch max.)
80 Ncm max. (6.8 lb-inch max.)
40 Ncm max. (3.4 lb-inch max.)
150 Ncm max. (13 lb-inch max.)
250 Ncm max. (21 lb-inch max.)
7 g to 9 g per module (0.25 to 0.32 oz.)
ENVIRONMENTAL
P11A
- 55 °C to + 125 °C
55/125/21
IP64
- 55 °C to + 125 °C
Operating Temperature Range
Climatic Category
Sealing
Storage Temperature
MARKING
PACKAGING
• Potentiometer Module
VISHAY logo, nominal ohmic value (Ω, kΩ, MΩ), two stars
identify P11A version, tolerance in % - variation law,
manufacturing date (four digits), “3” for the lead 3
• Switch Module
Version, manufacturing date (four digits), “c” for common lead
• Indent Module
Version, manufacturing date (four digits)
• Box
Document Number: 51031
Revision: 16-Jun-08
For technical questions, contact: [email protected]
P11S
- 55 °C to + 125 °C
55/125/56
IP64
- 55 °C to + 150 °C
www.vishay.com
2
P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
PERFORMANCES
TESTS
TYPICAL VALUE AND DRIFTS
P11S
total resistance shift
±2%
contact resistance variation
±4%
total resistance shift
± 0.2 %
56 days
total resistance shift
±2%
insulation resistance
> 1000 MΩ
total resistance shift
±5%
contact resistance variation
±5%
CONDITIONS
1000 h at + 70 °C
(90'/30')
- 55 °C to + 125 °C, 5 cycles
Load Life
Temperature Cycle
Moisture
+ 40 °C, 93 % relative humidity
Rotational Life
P11S/P11A: 50 000 cycles
Dry heat at + 125 °C/damp heat
cold - 55 °C/damp heat
5 cycles
50 g, 11 ms
3 shocks - 3 directions
10 to 55 Hz
0.75 mm or 10 g, 6 h
Climatic Sequence
Shock
Vibration
P11A
± 10 %
±5%
± 0.5 % typical
21 days
±5%
> 10 MΩ
±6%
±4%
total resistance shift
±1%
-
total resistance shift
resistance setting change
total resistance shift
voltage setting change
± 0.2 %
± 0.5 %
± 0.2 %
± 0.5 % typical
± 0.2 %
± 0.5 % typical
± 0.2 %
± 0.5 % typical
SAP ORDERING INFORMATION (Part Number 18 digits)
P
1
1
S
2
Q
0
E
A
S
Y
NUMBER
LOCATING
OF
BUSHING
PEG
MODULES
MODEL
STYLE
P11
S=
CERMET ELEMENT
A=
CONDUCTIVE PLASTIC
(AUDIO)
0
SHAFT
0
1
0
SHAFT
STYLE
LEADS
3
M
A
RESISTANCE CODE/
TOLERANCE/
TAPER OR SPECIAL
1
2
3
4
5
6
7
STANDARD RESISTANCE ELEMENT DATA
P11S CERMET
STANDARD
RESISTANCE
VALUES
LINEAR LAW
NON LINEAR LAW
TYPICAL TCR
- 55 °C/+ 125 °C
MAX.
MAX.
MAX. CUR. MAX.
MAX.
MAX. CUR. MAX.
MAX.
MAX. CUR.
POWER WORKING THROUGH POWER WORKING THROUGH POWER WORKING THROUGH P11S
AT 70 °C VOLTAGE
WIPER AT 70 °C VOLTAGE
WIPER AT 70 °C VOLTAGE
WIPER
Ω
W
V
mA
22
47
50
100
200
470
500
1K
2.2K
4.7K
5K
10K
22K
47K
50K
100K
220K
470K
500K
1M
2.2M
4.7M
1
4.69
6.85
7.07
10
14.8
21.6
22.4
31.6
46.9
63.5
70.7
100
148
217
224
316
350
350
350
350
350
350
213
146
141
100
67.4
46.1
44.7
31.6
21.3
14.5
14.1
10
6.7
4.6
4.47
3.16
1.59
0.75
0.70
0.35
0.16
0.07
www.vishay.com
3
P11A CONDUCTIVE PLASTIC
LINEAR LAW
1
0.56
0.26
0.25
0.12
0.05
0.02
W
V
mA
15.3
15.8
22.4
33.2
48.5
50.0
79.7
105
153
158
224
332
350
350
350
32.7
31.6
22.4
15.1
10.3
10.0
7.07
4.77
3.26
3.16
2.24
1.51
0.74
0.70
0.35
W
V
mA
0.5
22.4
33.2
48.5
50.0
79.7
105
153
158
224
332
350
350
22.4
15.1
10.3
10.0
7.07
4.77
3.26
3.16
2.24
1.51
0.74
0.70
P11A
ppm/°C
0.5
0.5
0.26
0.12
0.25
0.5
0.5
0.26
0.25
For technical questions, contact: [email protected]
± 150
± 500
Document Number: 51031
Revision: 16-Jun-08
P11
12.5 mm Modular Panel Potentiometers
Vishay Sfernice
Cermet (P11S) or Conductive Plastic Elements (P11A)
SAP ORDERING INFORMATION (Part Number 18 digits)
P
MODEL
1
1
S
2
Q
NUMBER
OF
MODULES
STYLE
0
E
A
A
B
C
D
E
F
G
Q
T
V
Ø
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
8
7
6
10
Y
LOCATING
PEG
BUSHING
P11
S
0
SHAFT
0
1
0
SHAFT
STYLE
3
M
A
RESISTANCE CODE/
TOLERANCE/
TAPER OR SPECIAL
LEADS
L
Old Codes
1/4"
7, 77, 77-3
3/8"
71
1/2"
72
3/8"
71H
1/2"
72H
3/8"
2, 03, 08 TP, QP, VP, 2P, 7P
8
Q
8
T
9.5
V, CC, CC-3
BUSHING DIMENSIONS
PANEL AND SHAFT SEALED: BUSHING G
Ø 8 (0.315)
B
A
8
(0.315)
C
J
6.7 (0.264)
K
All models have the same bushing Dia. 8 mm - L 8 mm
PANEL CUT OUT
BUSHING D AND E WITH LOCKING NUT
Bushings A, B,
C, D, E, T and Q
Bushings
F and V
ØH
Bushing G
Wrench 10 or 3/8"
7.2
(0.284)
G
ØH
G
A
B
Ø 8.5
(0.335)
C
G
BUSHINGS
A
B
C
J
G
H
Shafts
Bushing
Lead Versions
X.. Y..
K
Panel
Cutout
Threat
Wrench Nut
Style
Ø
Ø
L
T
Q
DIMENSIONS mm (± 0.5)
all Dia.
3
4
8
6
7
8
8
8
Ø
V
A
6
10
9.5
1/8"
1/4"
1/4"
J
B
C
D
E
DIMENSIONS INCHES (± 0.01)
1/8"
1/8"
1/8"
1/8"
1/4"
1/4"
1/4"
1/4"
3/8"
1/2"
3/8"
1/2"
F
1/4"
3/8"
3/8"
6.7
5
5
7
0.200
0.200
0.200
0.200
0.200
0.278
10.4
7.2
8.5
9.1
5.2
6.5
9.1
6.2
7.5
11.1
8.2
10.5
0.357
0.197
0.268
0.357
0.197
0.268
0.357
0.197
0.268
0.436
0.323
0.394
12
8
10
12
0.313
0.313
0.357
0.357
0.197
0.197
0.268
0.268
32 threads/inch
0.313
0.313
slotted
0.313
slotted
0.500
0.75
Notes:
• Hardware supplied in separate bags
• Slotted bushing for locking nut option
Document Number: 51031
Revision: 16-Jun-08
For technical questions, contact: [email protected]
www.vishay.com
4
P11
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
Vishay Sfernice
SAP ORDERING INFORMATION (Part Number 18 digits)
P
MODEL
1
STYLE
1
S
NUMBER
OF
MODULES
2
Q
BUSHING
0
E
LOCATING
PEG
A
S
Y
0
0
1
SHAFT
STYLE
SHAFT
0
3
M
A
RESISTANCE CODE/
TOLERANCE/
TAPER OR SPECIAL
LEADS
Old Codes
A=
B24
B=
B30
C=
B53
0=
Without
peg
LOCATING PEGS (Anti-Rotation Lug)
The locating peg is provided by a plate mounted on the bushing
and positioned by the module sides. Four set positions are
available, clock face orientation: 12, 3, 6, 9.
All P11 bushings have a double flat. When panel mounting
holes have been punched accordingly, an anti-rotation lug is
not necessary.
CODE
VERSION
BUSHING
A, B, C, D,
E, T, Q
Ø d mm
2
2
L mm
6.2
6.2
Ø d mm
2
2
L mm
7.75
7.75
Ø d mm
-
3.5
L mm
-
13.5
BUSHING EFFECTIVE
F, V
HIGH PEG
0.7
A
0.7
B
L
12
1.1
C
9
3
6
www.vishay.com
5
Ød
Locating pegs are supplied in separate bags with nuts and
washers
For technical questions, contact: [email protected]
Document Number: 51031
Revision: 16-Jun-08
P11
12.5 mm Modular Panel Potentiometers
Vishay Sfernice
Cermet (P11S) or Conductive Plastic Elements (P11A)
SAP ORDERING INFORMATION (Part Number 18 digits)
P
MODEL
1
1
S
NUMBER
OF
MODULES
STYLE
2
Q
0
E
A
LOCATING
PEG
BUSHING
S
Y
0
0
1
SHAFT
STYLE
SHAFT
Ø
L Old Codes
AA 3 9.5
K
AB 3 12.5
M
AJ 3 22
R
AP = Custom shaft
BA 1/8" 3/8"
CK
BB 1/8" 1/2"
CM
BG 1/8" 5/8"
CDM
BG 1/8" 5/8"
CD
BH 1/8" 3/4"
CH
BJ 1/8" 7/8"
CR
CC = Concentric shaft
EA 4 9.5
E
EB 4 12.5
F
EJ 4 22
G
FG 6 16
D
FH 6 19
I
FL 6 25
N
FR 6 50
S
GG 1/4" 5/8"
VD
GH 1/4" 3/4" VHM, VH
GJ 1/4" 7/8"
VR
GL 1/4" 1"
VN
GO 1/4" 1.5"
VL
0
LEADS
3
M
A
RESISTANCE CODE/
TOLERANCE/
TAPER OR SPECIAL
S=
R=
F=
Slotted
Round
Flatted
Knurled/
K=
splined
D = Custom
SHAFTS
The shaft length are always measured from the mounting face.
Standard shafts are designed by a 3 letter code (3 digits). Shafts
slots are aligned to ± 10° of the wiper position.
All standard shafts are slotted except flatted and splined, see
exeptions for bushing.
FLATTED SHAFT
15.9
+0
Ø 6.35 - 0.05
Ø6
0.3 at 45°
19
2.4 ± 0.05
8 ± 0.5
Ø7
A
BGF
+0
19.1
BUSHING:
SHAFT:
Ø 3.17 - 0.03
F
GHF
5.5 ± 0.05
BUSHING:
SHAFT:
BUSHING: Q
SPLINED SHAFT: FHK
CUSTOM SHAFTS
When special shafts are required - flat, threated ends, special
shaft lengths, etc. a drawing is required.
8 ± 0.5
STANDARD COMBINATION OF SHAFT STYLES AND BUSHINGS
SHAFT DIA.
3
3.17
3.17
3.17
4
6
6.35
BUSHING’ CODE
T
A
B
C
Q
V
F
Document Number: 51031
Revision: 16-Jun-08
SHAFT LENGTH AND STYLE AVAILABLE IN STANDARD (Others on request)
AAS
ABS
AJS
BAS
BBS
BGS
BGF
BHS
BJS
BBS
BGS
BHS
BJS
BGS
BHS
BJS
EAS
EBS
EJS
FHK
FGS
FLS
FRS
GGS
GHS
GJS
GLS
GOS
GHF
For technical questions, contact: [email protected]
www.vishay.com
6
P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
SAP ORDERING INFORMATION (Part Number 18 digits)
P
MODEL
1
1
S
NUMBER
OF
MODULES
STYLE
2
Q
BUSHING
0
E
A
LOCATING
PEG
SHAFT
S
Y
0
0
SHAFT
STYLE
1
0
FIRST DIGIT
Soldering lugs - 4.70 mm (0.185") pin
spacing
X PCB pins
Z PCB pins with front support plate
A
Z00
Z03
Z04
Z10
Z13
Z14
Z20
Z23
Z24
THIRD DIGIT
0 5.08 mm (0.200") space between modules
3 7.62 mm (0.300") space between modules
4 10.16 mm (0.400") space between modules
0
A PCB pins with front and back support plates
W
SECOND DIGIT
5.08 mm (0.200") pin spacing for X, Z, W
pins section 0.9 x 0.3 mm2 (0.035" x 0.012")
2.54 mm (0.100") pin spacing for X, Z, W
1
pin section 0.6 x 0.3 mm2 (0.024" x 0.012")
5.08 mm (0.200") pin spacing for X, Z, W
2
pins section 0.6 x 0.3 mm2 (0.024" x 0.012")
M
RESISTANCE CODE/
TOLERANCE/
TAPER OR SPECIAL
LEADS
Available leads
A00 W00 X00 Y00
A10 W10 X03
A13 W20 X04
A14
X10
A20
X13
A23
X14
A24
X20
X23
X24
Y
3
PCB pins - vertical mounting with 2 extra
pins - 1 module only
DIMENSIONS
SOLDER LUGS Y
PCB PIN OUT
12.5
(0.492)
6.85
(0.270)
3.71
(0.146)
J
12.5
(0.492)
13
(0.512)
4.7
(0.185)
4.7
(0.185)
5
(0.197)
1.8
(0.07)
2.4
(0.09)
0.9
0.9
(0.035) (0.035)
X-X2
X1
1 2 3
123
5.08
(0.200)
VERTICAL MOUNTING
HORIZONTAL MOUNTING
FRONT AND REAR SUPPORT PLATES
2.54
(0.100)
A
FRONT SUPPORT PLATE
B
12.7
(0.500)
REAR SUPPORT
PLATE
Z
Z1
Z2
C
K
W-W2
E
6.35
(0.250)
F
A1
A/A2
1 2 3
1
2
3
3.81
(0.150)
3.81
(0.150)
5.08
(0.200)
123
5.08
(0.200)
2.54
(0.100)
THE POSITION OF EACH MODULE IS FREE
G
T
Q
V
BUSHINGS
DIMENSIONS mm (± 0.5)
E
Leads Z00
3.15
1.85
1.85
3.85
E
Leads Z1. Z2. A..
2.8
1.6
1.6
3.6
F
Leads Z0.: 5.08 mm (0.200")
J
Leads X.. Y..
6.7
5
5
7
E
Leads Z0. with Rotary Switch
1.45
0.15
0.15
2.15
www.vishay.com
7
4
(0.157)
W1
1 2 3
3.81
(0.150)
3.81
(0.150)
1 23
5.08
(0.200)
5.08
(0.200)
A
0.071
0.063
0.200
0.006
12.7
(0.500)
12.7
(0.500)
12 3
2.54
(0.100)
B
C
D
E
DIMENSIONS INCHES (± 0.01)
0.071
0.071
0.071
0.071
0.063
0.063
0.063
0.063
Leads A.. Z1. Z2.: 3.81 mm (0.150")
0.200
0.200
0.200
0.200
0.006
0.006
0.006
0.006
For technical questions, contact: [email protected]
F
0.150
0.140
0.278
0.0846
Document Number: 51031
Revision: 16-Jun-08
P11
12.5 mm Modular Panel Potentiometers
Vishay Sfernice
Cermet (P11S) or Conductive Plastic Elements (P11A)
SAP ORDERING INFORMATION (Part Number 18 digits)
P
1
MODEL
1
S
2
Q
NUMBER
OF
MODULES
STYLE
0
BUSHING
E
A
LOCATING
PEG
S
Y
0
0
SHAFT
STYLE
SHAFT
1
0
3
M
A
RESISTANCE CODE/
TOLERANCE/
TAPER OR SPECIAL
LEADS
Resistance Code:
102 = 1 kΩ to
105 = 1 MΩ
Tolerance Code:
M = 20 %, K = 10 %, J = 5 %
Taper: A, L, W, F, S, R
or
special code given by
Vishay
RESISTANCE CODE
TOLERANCE
Standard:
See Conversion Table for ohmic value
POWER RATING CHART
Rated Power (W)
VARIATION LAWS
90 %
F
S
R
Vs
% 50 %
Ve
M = ± 20 %
On request: K = ± 10 %, J = ± 5 % (cermet only)
A
W
P11S Linear Law
1
P11S Non Linear Law
0.5
P11A Linear Law
0.25
20 %
10 %
P11A Non Linear Law
L
0
0
50 %
15°
Electrical travel 270°
15°
31°
Electrical travel
with switch 238°
31°
10
20
30
40
50
60
70
80
90 100 110 120 130
Ambient Temperature (°C)
Mechanical travel 300°
SPECIAL CODES GIVEN BY VISHAY
CIRCUIT DIAGRAM
a
c
(1)
(3)
b
(2)
Document Number: 51031
Revision: 16-Jun-08
cw
OPTION AVAILABLE
• Custom shaft
• Design on request
• Specific linearity
• Specific interlinerarity
• Specific variation law
• Multiple assemblies with various modules
For technical questions, contact: [email protected]
www.vishay.com
8
P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
P11 OPTION: ROTARY SWITCH MODULES
• Rotary switchs
• Current up to 2 A
• Actuation CW or CCW position
MODULES: RS ON/OFF SWITCH
RSI CHANGEOVER SWITCH
SWITCH SPECIFICATIONS
The position of each module is free.
RS and RSI rotary switches are housed in a standard P11 module
size 12.7 x 12.7 x 5.08 mm (0.5" x 0.5" x 0.2"). They have the
same terminal styles as the assembled electrical modules.
Switching Power Maximum
62.5 VA ν
15 VA =
Switching Current Maximum
0.25 A 250 V ν
0.5 A 30 V =
Maximum Current Through Element
An assembly can comprise 1 or more switch modules.
2A
Contact Resistance
30 mΩ
Switch actuation is described as seen from the shaft end.
D:means actuation in maximum CCW position
F:means actuation in maximum CW position
Dielectric
Strength
The switch actuation travel is 25° with a total mechanical travel of
300° ± 5° and electrical travel of electrical module is 238° ± 10°.
Maximum Voltage Operation
250 V ν
30 V =
RDS SINGLE POLE SWITCH, NORMALLY OPEN
Insulation Resistance Between Contacts
106 MΩ
In full CCW position, the contact between 1 and 3 is open. It is
made at the beginning of the travel in CW direction.
RSF SINGLE POLE SWITCH, NORMALLY OPEN
In full CW position, the contact between 1 and 3 is open. It is
made at the beginning of the travel in CCW direction.
Terminal to Terminal
1000 VRMS
Terminal to Bushing
2000 VRMS
Life at Pmax.
10 000 actuations
Minimal Travel
Operating Temperature
- 40 °C to + 85 °C
ELECTRICAL DIAGRAM
RSD
RSF
RSID SINGLE POLE CHANGEOVER
25°
RSID
CCW POSITION
RSIF
CW POSITION
In full CCW position, the contact is made between 3 and 2 and
open between 3 and 1. Switch actuation (CW direction) reverses
these positions.
RSIF SINGLE POLE CHANGEOVER
In full CW position, the contact is made between 1 and 2 and
open between 1 and 3. Switch actuation (CCW direction)
reverses these positions.
1
3
1
2 3*
1* 2
3
Note:
• Common
ORDERING INFORMATION (First order only)
RSID
RSD
SPST: Single pole, open switch in CCW position - 2 pins
RSF
SPST: Single pole, open switch in CW position - 2 pins
RSID
SPDT: Single pole, changeover switch in CCW position - 3 pins
RSIF
SPDT: Single pole, changeover switch in CW position - 3 pins
www.vishay.com
9
For technical questions, contact: [email protected]
Document Number: 51031
Revision: 16-Jun-08
P11
12.5 mm Modular Panel Potentiometers
Vishay Sfernice
Cermet (P11S) or Conductive Plastic Elements (P11A)
P11 OPTION: PUSH/PUSH OR MOMENTARY/PUSH SWITCH MODULES
3.3
(0.013)
40.8 (1.60)
ab c
12 3
• Push/push or momentary push
1.3
(0.051)
3.6 (0.14)
28
(1.10)
• Current up to 2 A
4 4
(0.15) (0.15)
MODULES: PUSH/PUSH SWITCH RSPP
MOMENTARY/PUSH SWITCH RSMP
SWITCH SPECIFICATIONS
They have to be the last element of potentiometer
Options:
Switching Power Maximum
50 VA ν
Switching Current Maximum
0.5 A ν
Maximum Current Through Element
2 reversing switches F2
4 reversing switches F4
6 reversing switches F6
8 reversing switches F8
Not available with panel sealed option.
Number of modules before the switch limited to 3 modules.
Length of shaft (FMF) 25 mm maximum.
RSPP F2: PUSH/PUSH SWITCH WITH TWO REVERSING
SWITCHES
Idle position: The contact is made between 1 and 2 and a and b.
It is open between 2 and 3 and b and c.
Pushed position: The contact is made between 2 and 3
and b and c. It is open between 1 and 2 and a and b.
2A
Contact Resistance
Dielectric
Strength
100 mΩ
Terminal to Terminal
1500 VRMS
Terminal to Bushing
2000 VRMS
Maximum Voltage Operation
250 V ν
Insulation Resistance Between Contacts
103 MΩ
Life at Pmax.
100 000 actuations
Minimal Travel
3.3 mm to 4.7 mm
Operating Temperature
- 20 °C to + 70 °C
ELECTRICAL DIAGRAM
RSPP F2
IDLE POSITION
PUSHED POSITION
a
b
c
1
2
3
ORDERING INFORMATION (First order only for special code creation)
RSPP
F2
RSPP: Push/push
F2: 2 reversing switches (standard version)
RSMP: Momentary/push
F4: 4 reversing switches
F6: 6 reversing switches
F8: 8 reversing switches
Document Number: 51031
Revision: 16-Jun-08
For technical questions, contact: [email protected]
www.vishay.com
10
P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
P11 OPTION: CONCENTRIC SHAFTS
The CC concentric shaft versions allies the total flexibility of the P11 modular
system to the advantage of having two separate shafts.
5.08
2.54
The outer 6 mm or 1/4" or 1/8" dia. shaft drives the modules situated
immediately behind the panel, before the spacer module.
The inner 3 mm or 1/8" or 0.07" dia. shaft drives the modules situated after the
spacer module.
L
Spacer is available with a choice of two spacer thickness:
5.08 mm designations or 2.54 mm designation. See dimensional drawing
BUSHING
CODE
l
OUTER SHAFT DIAMETER
Spacer module
INNER SHAFT DIAMETER
DIAMETER
LENGTH L
SHAFT STYLE
DIAMETER
LENGTH l
SHAFT STYLE
V
6
16
R
3
28.5
R
F
6.35 (1/4")
16
R
3.17 (1/8")
28.5
R
A
3.17 (1/8")
12.7 (1/2")
R
1.8 (0.07")
22.2 (7/8")
R
ORDERING INFORMATION (First order only for special code creation)
5.08
2.54: Mechanical spacer of 2.54 mm
5.08: Mechanical spacer of 5.08 mm
Customer should define witch modules is driven by each shaft (see example of ordering information at the end of the data sheet)
P11 OPTION: DETENT MODULES
The valley detents mechanism is housed in a standard P11
module. Up to 21 detents position available.
Count detents as follows: 1 for CCW position, 1 for full CW
position, plus the other positions forming equal resistance
increments (linear taper) - not equal angles.
Available now: CVID - CVIF - CVIM
CV3 - CV11 - CV21
α
β
β
CVID
CVIM
CVIF
CV11
°
α = n270
-1
β = α + 15°
ORDERING INFORMATION (First order only for special code creation)
CV1M
CV1M
CV1M J84
CV1D
CV1F
CV3
CV11
CV21
1 detent at half travel
CV1M with accuracy of center point ± 2 % (all laws except S)
1 detent at CCW position
1 detent at CW position
3 detents
11 detents
21 detents
P11 OPTION: NEUTRAL MODULES “EN”
Neutral or screen module is housed in a standard P11 module.
It is used as a screen between two electrical modules.
The leads can be connected to ground.
ORDERING INFORMATION (First order only for special code creation)
EN
EN
Neutral module
www.vishay.com
11
For technical questions, contact: [email protected]
Document Number: 51031
Revision: 16-Jun-08
P11
12.5 mm Modular Panel Potentiometers
Vishay Sfernice
Cermet (P11S) or Conductive Plastic Elements (P11A)
P11 OPTION: CENTER CURRENT TAP “J”
The extra terminal is a solder lug connected at 50 % of electrical
travel and siluated in the potentiometer module opposite the
terminals.
Center tap short circuit 11° of travel.
ORDERING INFORMATION (First order only)
J
J
Center tap
P11 OPTION: SPECIAL LINEARITY - CONFORMITY
E
The independent linearity (conformity for the non linear laws) is
the maximum gap ΔV between the actual variation curve and the
theorical variation curve the nearest to it. The linearity and the
conformity are expressed in percentage of the total applied
voltage E
± ΔV max.
linearity conformity = ----------------------E
They are measured over 90 % of actual electrical travel
(centered).
On request linearity can be guaranteed in linear law.
V
V
Limits of
linearity test
Effective electrical travel
ORDERING INFORMATION (First order only)
J123
J123
J145
Linearity ± 3 % (linear law)
Linearity ± 2 % (linear law)
For other request, contact us.
P11 OPTION: SPECIAL INTERLINEARITY - INTERCONFORMITY
E
It is the maximum deviation between the actual voltage outputs
of 2 or more pot modules in the same assembly. It is expressed
as a percentage of the total applied voltage, or in dB attenuation.
V
Interlinearity is measured between 2 pot modules, over 10 to
90 % of the attenuation.
C
V1
V2
The interlinearity or interconformity is expressed as a
percentage of the total applied voltage:
C
I % = ------E
Limits of test
Effective electrical travel
V1
Or in decibels by comparison between outputs V1 and V2
V1
I dB = 20 log -----V2
V2
ORDERING INFORMATION (First order only)
J44
J44
Interlinearity ± 2 % (linear law)
Document Number: 51031
Revision: 16-Jun-08
For other request, contact us.
For technical questions, contact: [email protected]
www.vishay.com
12
P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
EXAMPLES OF FIRST ORDER INFORMATION
FIRST EXAMPLE: Triple module (switch is counted as a module)
P
1
1
S
3
Q
0
A
P
S
Y
0
0
BUSHING Q WITHOUT LOCATING CUSTOM SHAFT
MODEL STYLE
SOLDER LUGS
3 MODULES
(Ø7: L8)
SLOTTED
P11
S
PEG
SPECIAL TO BE DEFINED
BY VISHAY
ORDERING INFORMATION:
PART NUMBER
P11S3Q0APSY00.....
SHAFT AND BUSHING
See drawing of special shaft attached
MODULE NO. 1
RSID
MODULE NO. 2
103 M A
J123
MODULE NO. 3
503 M A
J
SECOND EXAMPLE: Concentric shaft with 2 modules on each shaft
P
1
1
S
5
V
MODEL STYLE 5 MODULES BUSHING V
P11
S
(Ø10: L9,5)
0
C
C
R
WITHOUT LOCATING
PEG
Y
0
STANDARD
CONCENTRIC
SHAFT CCR
0
SOLDER LUGS
SPECIAL TO BE DEFINED
BY VISHAY
ORDERING INFORMATION:
PART NUMBER
P11S5V0CCRY00.....
SHAFT AND BUSHING
MODULE NO. 1
CV1M
Driven by outer shaft
MODULE NO. 2
502 K A
Driven by outer shaft
MODULE NO. 3
5.08
MODULE NO. 4
103 K A
J44
Driven by inner shaft
MODULE NO. 5
103 K A
J44
Driven by inner shaft
Mechanical spacer 5,08 mm
PART NUMBER DESCRIPTION (used on some Vishay document or label, for information only)
P11S
2
Q
MODEL
MODULES
BUSHING
www.vishay.com
13
0
EA
S
Y00
10K
SHAFT
LOCATING
LEADS VALUE
SHAFT
STYLE
PEG
20 %
TOL.
For technical questions, contact: [email protected]
A
e3
TAPER SPECIAL SPECIAL
LEAD (Pb)FREE
Document Number: 51031
Revision: 16-Jun-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1