P11S, P11A www.vishay.com Vishay Sfernice 12.5 mm Modular Panel Potentiometer Cermet (P11S) or Conductive Plastic Elements (P11A) FEATURES • • • • • • • • • • • • • • • VERSATILE 12.5 mm square single turn panel control Five shaft diameters and 29 terminal styles Multiple assemblies - up to seven modules Tests according to CECC 41000 or IEC 60393-1 GAM T1 P11S version for industrial, military, and aeronautics applications P11A version for professional audio applications Low current compatibility Shaft and panel sealed version Up to twenty-one indent positions Rotary and push/push switch options Concentric shafts Custom designs on request Trimmer version T11 (see document no. 51021) Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MODULAR COMPACT ROBUST CONFIGURATION EXAMPLE - Dimensions in millimeters (inches) ± 0.5 mm (± 0.02") Single module, single shaft, solder lugs, metric bushing and shaft 12.5 (0.492) M6 x 0.75 3 Ø (0.118) 8 (0.315) 22 (0.866) 1.8 (0.071) 5.07 (0.200) 6.85 (0.270) 12.5 (0.492) 2.4 (0.094) 0,9 (0.035) 13.1 (0.516) 5 (0.197) 4.65 (0.183) DETAIL A 4.9 (0.193) A 4.65 (0.183) Single module, single shaft, vertical mounting, PC pins with support plate, metric bushing and shaft M10 x 0.75 12.7 (0.500) 6 Ø (0.236) 8 (0.315) 9.5 (0.374) 2.54 (0.100) 16 (0.626) 2.54 (0.100) Dual modules, single shaft, PC pins with front support plates, imperial bushing and shaft 9.5 (0.374) 12.5 (0.492) 3/8" x 3/8" 13.1 (0.516) 6.35 Ø (0.250) 3.6 (0.143) 19.05 (0.750) Revision: 24-Sep-15 8 (0.325) 7.62 (0.300) 2.54 (0.100) 2.54 (0.100) Document Number: 51031 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11S, P11A www.vishay.com Vishay Sfernice GENERAL SPECIFICATIONS ELECTRICAL (initial) Resistive element P11A P11S Conductive plastic Cermet Electrical travel Resistance range (1) 270° ± 10° 270° ± 10° 1 k to 1 M 20 to 10 M 470 to 500 k 100 to 2.2 M ± 20 % ± 20 % - ± 5 % or ± 10 % Linear taper Non-linear taper Standard Tolerance On request 90 % F S R Vs % 50 % Ve A W 20 % 10 % Taper L 50 % Electrical travel 270° 15° 15° Electrical travel with switch 238° 31° 31° Mechanical travel 300° c a Circuit diagram (3) (1) b (2) cw Linear taper 0.5 W at +70 °C 1 W at +70 °C Non-linear taper 0.25 W at +70 °C 0.5 W at +70 °C 0.25 W at +70 °C per module 0.5 W at +70 °C per module Rated Power (W) Multiple assemblies Power rating at 70 °C P11S Linear Taper 1 P11S Non-Linear Taper 0.5 P11A Linear Taper 0.25 P11A Non-Linear Taper 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 Ambient Temperature (°C) Temperature coefficient (typical) Limiting element voltage End resistance (typical) Contact resistance variation (typical) Linear taper Independent linearity (typical) Linear taper Insulation resistance Dielectric strength Attenuation Mechanical endurance ± 500 ppm ± 150 ppm 350 V 350 V 2 2 1% 2 % or 3 ±5% ±5% 106 M min. 106 M min. 1500 VRMS min. 1500 VRMS min. 90 dB max./0.05 dB min. - 50 000 cycles 50 000 cycles Note (1) Consult Vishay Sfernice for other ohmic values. Revision: 24-Sep-15 Document Number: 51031 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11S, P11A www.vishay.com Vishay Sfernice MECHANICAL (initial) Mechanical travel 300° ± 5° Operating torque (typical) Single and dual assemblies 0.4 Ncm to 1.8 Ncm max. (0.57 oz.-inch to 2.55 oz.-inch max.) Three to seven modules (per module) 0.2 Ncm to 0.3 Ncm max. (0.28 oz.-inch to 0.42 oz.-inch max.) End stop torque (all bushing except G and concentric shaft configuration) 3 mm, 4 mm, and 1/8" dia. shafts 35 Ncm max. (2.9 lb-inch max.) 6 mm and 1/4" dia. shafts 80 Ncm max. (6.8 lb-inch max.) All shafts dia. 40 Ncm max. (3.4 lb-inch max.) End stop torque for bushing G End stop torque for concentric shaft configuration 3 mm and 1/8" dia. shafts 25 Ncm max. (2.1 lb-inch max.) 6 mm and 1/4" dia. shafts 80 Ncm max. (6.8 lb-inch max.) 6 mm, 7 mm, and 1/4" dia. bushings 150 Ncm max. (13 lb-inch max.) Tightening torque 10 mm and 3/8" dia. bushings 250 Ncm max. (21 lb-inch max.) Weight 7 g to 9 g per module (0.25 oz. to 0.32 oz.) ENVIRONMENTAL Operating temperature range Climatic category P11A P11S -55 °C to +125 °C -55 °C to +125 °C 55 / 125 / 21 55 / 125 / 56 IP64 IP64 Sealing MARKING PACKAGING • Potentiometer module Vishay logo, nominal ohmic value (, k, M), two stars identify P11A version, tolerance in % - variation law, manufacturing date (four digits), “3” for the lead 3 • Switch module Version, manufacturing date (four digits), “c” for common lead • Box • Indent module Version, manufacturing date (four digits) PERFORMANCES TESTS TYPICAL VALUE AND DRIFTS CONDITIONS RT/RT P11S P11A ±2% ± 10 % 1000 h at rated power 90’/30’ - ambient temp. 70 °C Contact resistance variation ±4% ±5% Change of temperature -55 °C to +125 °C, 5 cycles RT/RT ± 0.2 % ± 0.5 % Damp heat, steady state +40 °C, 93 % relative humidity P11S: 56 days, P11A: 21 days RT/RT ±2% ±5% Insulation resistance > 1000 M > 10 M Electrical endurance RT/RT ±5% ±6% Contact resistance variation ±5% ±4% Dry heat at +125 °C/damp heat cold -55 °C/damp heat, 5 cycles RT/RT ±1% - Shock 50 g’s, 11 ms 3 shocks - 3 directions RT/RT ± 0.2 % ± 0.2 % R1-2/R1-2 ± 0.5 % ± 0.5 % Vibration 10 Hz to 55 Hz 0.75 mm or 10 g’s, 6 h RT/RT ± 0.2 % ± 0.2 % V1-2/V1-3 ± 0.5 % ± 0.5 % Mechanical endurance Climatic sequence 50 000 cycles Note • Nothing stated herein shall be construed as a guarantee of quality or durability. Revision: 24-Sep-15 Document Number: 51031 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11S, P11A www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) P 1 1 S 2 MODEL STYLE P11 S = cermet element Q 0 NUMBER OF MODULES E A BUSHING S Y LOCATING PEG 0 0 SHAFT 1 SHAFT STYLE 0 LEADS 3 M A RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL 1 2 3 4 5 6 7 A = conductive plastic (audio) STANDARD RESISTANCE ELEMENT DATA P11S CERMET P11A CONDUCTIVE PLASTIC LINEAR TAPER NON-LINEAR TAPER LINEAR TAPER NON-LINEAR TAPER STANDARD RESISTANCE MAX. MAX. MAX. CUR. MAX. MAX. MAX. CUR. MAX. MAX. MAX. CUR. MAX. MAX. MAX. CUR. VALUES POWER WORKING THROUGH POWER WORKING THROUGH POWER WORKING THROUGH POWER WORKING THROUGH AT 70 °C VOLTAGE WIPER AT 70 °C VOLTAGE WIPER AT 70 °C VOLTAGE WIPER AT 70 °C VOLTAGE WIPER W V mA 22 1 4.69 213 47 1 6.86 146 50 1 7.07 141 100 1 10.0 220 1 470 1 500 W V mA W V mA W V mA 100 0.5 7.07 70.7 14.8 67.4 0.5 10.5 47.7 21.7 46.1 0.5 15.3 32.6 1 22.4 44.7 0.5 15.8 31.6 1K 1 31.6 31.6 0.5 22.4 22.4 0.5 22.4 22.4 0.25 11.2 22.4 0.25 15.8 2.2K 1 46.9 21.3 0.5 33.2 15.1 0.5 33.2 15.8 15.1 0.25 23.5 4.7K 1 69 14.5 0.5 48.5 10.3 0.5 10.7 48.5 10.3 0.25 34.3 5K 1 70.7 14.1 0.5 50.0 10.0 7.29 0.5 50.0 10.0 0.25 35.4 10K 1 100 10.0 0.5 70.7 7.07 7.07 0.5 70.7 7.07 0.25 50.0 5.00 22K 47K 1 148 6.74 0.5 1 217 4.61 0.5 105 4.77 0.5 105 4.77 0.25 74.2 3.37 153 3.26 0.5 153 3.26 0.25 108 50K 1 224 4.47 2.31 0.5 158 3.16 0.5 158 3.16 0.25 112 100K 1 316 2.24 3.16 0.5 224 2.24 0.5 224 2.24 0.25 158 220K 0.56 1.58 350 1.59 0.5 332 1.51 0.5 332 1.51 0.25 235 470K 1.07 0.26 350 0.75 0.26 349 0.74 0.26 350 0.74 0.25 343 0.73 500K 0.25 350 0.70 0.25 350 0.71 0.25 350 0.71 0.25 350 0.71 1M 0.12 350 0.35 0.12 350 0.34 0.12 350 0.34 2.2M 0.06 350 0.16 0.056 350 0.16 4.7M 0.03 350 0.074 5M 0.02 350 0.070 10M 0.01 350 0.035 Revision: 24-Sep-15 Document Number: 51031 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11S, P11A www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) P 1 MODEL 1 STYLE S 2 Q 0 NUMBER OF MODULES E A A B C D E F G Q T V Ø 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 8 7 6 10 Y 0 LOCATING PEG BUSHING P11 S 0 1 SHAFT STYLE SHAFT 0 3 M A RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL LEADS L Old Codes 1/4" 7, 77, 77-3 3/8" 71 1/2" 72 3/8" 71H 1/2" 72H 3/8" 2, 03, 08 TP, QP, VP, 2P, 7P 8 Q 8 T 9.5 V, CC, CC-3 BUSHING DIMENSIONS PANEL AND SHAFT SEALED: BUSHING G Ø 8 (0.315) B A 8 (0.315) 6.7 (0.264) J C K All models have the same bushing Dia. 8 mm - L 8 mm PANEL CUT OUT BUSHING D AND E WITH LOCKING NUT Bushing G Bushings F and V Bushings A, B, C, D, E, T and Q ØH 7.2 (0.284) G B A Ø 8.5 (0.335) ØH G Wrench 10 or 3/8" C G BUSHINGS A B C J G H Shafts Bushing Lead versions X.. Y.. K Panel Cutout Thread Wrench nut Style T Q V A DIMENSIONS mm (± 0.5) Ø Ø L Ø All Dia. 8 8 6.7 10.4 7.2 8.5 3 6 8 5 9.1 5.2 6.5 12 8 B C J D E F DIMENSIONS INCHES (± 0.02) 4 7 8 5 9.1 6.2 7.5 6 10 9.5 7 11.1 8.2 10.5 1/8" 1/4" 1/4" 0.200 0.357 0.197 0.268 1/8" 1/4" 3/8" 0.200 0.357 0.197 0.268 10 12 0.313 0.313 0.75 1/8" 1/8" 1/4" 1/4" 1/2" 3/8" 0.200 0.200 0.357 0.357 0.197 0.197 0.268 0.268 32 threads/inch 0.313 0.313 Slotted 1/8" 1/4" 1/2" 0.200 0.357 0.197 0.268 1/4" 3/8" 3/8" 0.278 0.436 0.323 0.394 0.313 Slotted 0.500 Notes • Hardware supplied in separate bags • Slotted bushing for locking nut option Revision: 24-Sep-15 Document Number: 51031 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11S, P11A www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) P 1 1 MODEL S 2 Q NUMBER OF MODULES STYLE 0 E A S Y LOCATING PEG BUSHING 0 SHAFT 0 1 SHAFT STYLE 0 3 M A RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL LEADS Old Codes A= B24 B= B30 C= B53 0= without peg LOCATING PEGS (anti-rotation lug) The locating peg is provided by a plate mounted on the bushing and positioned by the module sides. Four set positions are available, clock face orientation: 12, 3, 6, 9. All P11 bushings have a double flat. When panel mounting holes have been punched accordingly, an anti-rotation lug is not necessary. CODE VERSION BUSHING A, B, C, D, E, T, Q BUSHING F, V EFFECTIVE HIGH PEG Ø d mm 2 2 0.7 L mm 6.2 6.2 Ø d mm 2 2 L mm 7.75 7.75 Ø d mm - 3.5 L mm - 13.5 A 0.7 B L 12 1.1 C 9 3 6 Ød Locating pegs are supplied in separate bags with nuts and washers Revision: 24-Sep-15 Document Number: 51031 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11S, P11A www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) P 1 MODEL 1 S NUMBER OF MODULES STYLE 2 Q 0 BUSHING E A LOCATING PEG S Y 0 0 1 SHAFT STYLE SHAFT 0 LEADS 3 M A RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL S = slotted Ø L Old Codes 3 9.5 K 3 12.5 M 3 22 R AP = custom shaft BA 1/8" 3/8" CK BB 1/8" 1/2" CM BG 1/8" 5/8" CDM BG 1/8" 5/8" CD BH 1/8" 3/4" CH BJ 1/8" 7/8" CR CC = concentric shaft EA 4 9.5 E EB 4 12.5 F EJ 4 22 G FG 6 16 D FH 6 19 I FL 6 25 N FR 6 50 S GG 1/4" 5/8" VD GH 1/4" 3/4" VHM, VH GJ 1/4" 7/8" VR GL 1/4" 1" VN GO 1/4" 1.5" VL AA AB AJ R= F= round flatted K= knurled/ splined D = custom SHAFTS in millimeters ± 0.5 The shaft length is always measured from the mounting face. Standard shafts are designed by a 3 letters code (3 digits). Shafts slots are aligned to ± 10° of the wiper position. All standard shafts are slotted except flatted and splined, see exeptions for bushing. FLATTED SHAFT A BGF 15.9 0.3 at 45° 19 2.4 ± 0.05 8 ± 0.5 Bushing: Shaft: Ø 3.17 19.1 Ø7 Ø6 F GHF 5.5 ± 0.05 Bushing: Shaft: BUSHING: Q SPLINED SHAFT: FHK CUSTOM SHAFTS When special shafts are required - flat, threated ends, special shaft lengths, etc. a drawing is required. 8 ± 0.5 Ø 6.35 STANDARD COMBINATION OF SHAFT STYLES AND BUSHINGS SHAFT DIA. 3 3.17 3.17 3.17 4 6 6.35 Revision: 24-Sep-15 BUSHING CODE T A B C Q V F SHAFT LENGTH AND STYLE AVAILABLE IN STANDARD (others on request) AAS ABS AJS BAS BBS BGS BGF BHS BJS BBS BGS BHS BJS BGS BHS BJS EAS EBS EJS FHK FGS FLS FRS GGS GHS GJS GLS GOS GHF Document Number: 51031 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11S, P11A www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) P 1 MODEL 1 S NUMBER OF MODULES STYLE 2 Q 0 E A LOCATING PEG BUSHING S SHAFT Y 0 0 SHAFT STYLE 1 0 3 M A RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL LEADS Available leads A00 W00 X00 Y00 Z00 A10 W10 X03 Y03 Z03 A13 W20 X04 Y04 Z04 A14 X10 Z10 A20 X13 Z13 A23 X14 Z14 A24 X20 Z20 X23 Z23 X24 Z24 Y X Z A W FIRST DIGIT Soldering lugs PCB pins PCB pins with front support plate PCB pins with front and back support plates PCB pins - vertical mounting with 2 extra pins - 1 module only SECOND DIGIT 0 1 2 0 3 4 Y = 4.65 (0.183") A, X, Z, W = 5.08 (0.200") pin spacing pins section 0.9 x 0.3 (0.035" x 0.012") THIRD DIGIT 5.08 (0.200") space between modules 7.62 (0.300") space between modules 10.16 (0.400") space between modules 2.54 (0.100") pin spacing pin section 0.6 x 0.3 (0.024" x 0.012") 5.08 (0.200") pin spacing pins section 0.6 x 0.3 (0.024" x 0.012") DIMENSIONS in millimeters (inches) ± 0.5 mm (± 0.02") SOLDER LUGS Y PCB PIN OUT 12.5 (0.492) 6.85 (0.270) 3.71 (0.146) J 12.5 (0.492) 13 (0.512) 4.7 (0.185) 4.7 (0.185) 5 (0.197) 1.8 (0.07) 2.4 (0.09) 0.9 0.9 (0.035) (0.035) X-X2 X1 1 2 3 123 5.08 (0.200) VERTICAL MOUNTING HORIZONTAL MOUNTING FRONT AND REAR SUPPORT PLATES 2.54 (0.100) A FRONT SUPPORT PLATE B 12.7 (0.500) Rear support plate Z Z1 Z2 C K W-W2 E 6.35 (0.250) F A1 A/A2 1 2 3 1 2 3 3.81 (0.150) 3.81 (0.150) 5.08 (0.200) 123 5.08 (0.200) 2.54 (0.100) THE POSITION OF EACH MODULE IS FREE G T Q V BUSHINGS DIMENSIONS mm (± 0.5) E Leads Z00 3.15 1.85 1.85 3.85 E Leads Z1. Z2. A.. 2.8 1.6 1.6 3.6 F Leads Z0.: 5.08 (0.200") J Leads X.. Y.. 6.7 5 5 7 E Leads Z0. with Rotary Switch 1.45 0.15 0.15 2.15 Revision: 24-Sep-15 4 (0.157) W1 1 2 3 3.81 (0.150) 5.08 (0.200) A 0.071 0.063 0.200 0.006 3.81 (0.150) 12.7 (0.500) 1 23 5.08 (0.200) 12.7 (0.500) 12 3 2.54 (0.100) B C D E DIMENSIONS INCHES (± 0.02) 0.071 0.071 0.071 0.071 0.063 0.063 0.063 0.063 Leads A.. Z1. Z2.: 3.81 (0.150") 0.200 0.200 0.200 0.200 0.006 0.006 0.006 0.006 F 0.150 0.140 0.278 0.0846 Document Number: 51031 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11S, P11A www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) P 1 MODEL 1 STYLE S 2 NUMBER OF MODULES Q 0 BUSHING E A LOCATING PEG S SHAFT Y 0 SHAFT STYLE 0 1 LEADS 0 3 M A RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL From 20 to 10 M see instructions on electrical specifications Resistance code: 200 = 20 to 106 = 10 M Tolerance code: standard: M = ± 20 % On request: K = ± 10 %, J = ± 5 % (cermet only) Taper: A, L, W, F, S, R or special code given by Vishay SPECIAL CODES GIVEN BY VISHAY Option available: • • • • • • Custom shaft Custom design on request Specific linearity Specific interlinerarity Specific taper Multiple assemblies with various modules Revision: 24-Sep-15 Document Number: 51031 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11S, P11A www.vishay.com Vishay Sfernice P11 OPTION: ROTARY SWITCH MODULES • Rotary switches • Current up to 2 A • Actuation CW or CCW position • Sealing IP60 MODULES: RS ON/OFF SWITCH RSI CHANGEOVER SWITCH The position of each module is free. RS and RSI rotary switches are housed in a standard P11 module size 12.7 mm x 12.7 mm x 5.08 mm (0.5" x 0.5" x 0.2"). They have the same terminal styles as the assembled electrical modules. An assembly can comprise 1 or more switch modules. Switch actuation is described as seen from the shaft end. D: Means actuation in maximum CCW position F: Means actuation in maximum CW position SWITCH SPECIFICATIONS Switching power maximum 62.5 VA 15 VA = Switching current maximum 0.25 A 250 V 0.5 A 30 V = Maximum current through element Dielectric strength 100 m Terminal to terminal 1000 VRMS Terminal to bushing 2000 VRMS 250 V 30 V = Maximum voltage operation The switch actuation travel is 25° with a total mechanical travel of 300° ± 5° and electrical travel of electrical modules is 238° ± 10°. Insulation resistance between contacts Leads finish: Gold plated Minimal travel RDS SINGLE POLE SWITCH, NORMALLY OPEN Operating temperature In full CCW position, the contact between 1 and 3 is open. It is made at the beginning of the travel in CW direction. ELECTRICAL DIAGRAM RSF SINGLE POLE SWITCH, NORMALLY OPEN In full CW position, the contact between 1 and 3 is open. It is made at the beginning of the travel in CCW direction. 2A Contact resistance Life at Pmax. 106 M 10 000 actuations 25° RSD RSF -40 °C to +85 °C RSID CCW POSITION RSIF CW POSITION RSID SINGLE POLE CHANGEOVER In full CCW position, the contact is made between 3 and 2 and open between 3 and 1. Switch actuation (CW direction) reverses these positions. RSIF SINGLE POLE CHANGEOVER In full CW position, the contact is made between 1 and 2 and open between 1 and 3. Switch actuation (CCW direction) reverses these positions. 1 3 1 2 3 (1) 1 (1) 2 3 Note (1) Common ORDERING INFORMATION (First order only) RSID RSD SPST: Single pole, open switch in CCW position - 2 pins RSF SPST: Single pole, open switch in CW position - 2 pins RSID SPDT: Single pole, changeover switch in CCW position - 3 pins RSIF SPDT: Single pole, changeover switch in CW position - 3 pins Revision: 24-Sep-15 Document Number: 51031 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11S, P11A www.vishay.com Vishay Sfernice P11 OPTION: PUSH/PUSH OR MOMENTARY/PUSH SWITCH MODULES 3.3 (0.013) 40.8 (1.60) ab c 12 3 1.3 (0.051) 28 (1.10) 3.6 (0.14) • Push/push or momentary push • Current up to 2 A • Sealing IP60 4 4 (0.15) (0.15) MODULES: PUSH/PUSH SWITCH RSPP MOMENTARY/PUSH SWITCH RSMP SWITCH SPECIFICATIONS Switching power maximum 50 VA They have to be the last element of potentiometer Switching current maximum 0.5 A Options: Maximum current through element 2 reversing switches F2 4 reversing switches F4 6 reversing switches F6 8 reversing switches F8 Not available with panel sealed option. Number of modules before the switch limited to 3 modules. Length of shaft (FMF) 25 mm maximum. 2A Contact resistance Dielectric strength 100 m Terminal to terminal 1500 VRMS Terminal to bushing 2000 VRMS Maximum voltage operation 250 V RSPP F2: PUSH/PUSH SWITCH WITH TWO REVERSING SWITCHES Insulation resistance between contacts 103 M Life at Pmax. 100 000 actuations Idle position: The contact is made between 1 and 2 and a and b. It is open between 2 and 3 and b and c. Minimal travel 3.3 mm to 4.7 mm Pushed position: The contact is made between 2 and 3 and b and c. It is open between 1 and 2 and a and b. Operating temperature -40 °C to +70 °C ELECTRICAL DIAGRAM RSPP F2 IDLE POSITION PUSHED POSITION a b c 1 2 3 ORDERING INFORMATION (First order only for special code creation) RSPP F2 RSPP: Push/push F2: 2 reversing switches (standard version) RSMP: Momentary/push F4: 4 reversing switches F6: 6 reversing switches F8: 8 reversing switches Revision: 24-Sep-15 Document Number: 51031 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11S, P11A www.vishay.com Vishay Sfernice P11 OPTION: CONCENTRIC SHAFTS The CC concentric shaft versions allies the total flexibility of the P11 modular system to the advantage of having two separate shafts. 5.08 2.54 The outer 6 mm or 1/4" or 1/8" dia. shaft drives the modules situated immediately behind the panel, before the spacer module. The inner 3 mm or 1/8" or 0.07" dia. shaft drives the modules situated after the spacer module. L Spacer is available with a choice of two spacer thickness: 5.08 mm designations or 2.54 mm designation. See dimensional drawing l OUTER SHAFT DIAMETER Spacer module INNER SHAFT DIAMETER BUSHING CODE DIAMETER LENGTH L SHAFT STYLE DIAMETER LENGTH l SHAFT STYLE V 6 16 R 3 28.5 R F 6.35 (1/4") 16 R 3.17 (1/8") 28.5 R A 3.17 (1/8") 12.7 (1/2") R 1.8 (0.07") 22.2 (7/8") R ORDERING INFORMATION (First order only for special code creation) 5.08 2.54: Mechanical spacer of 2.54 mm 5.08: Mechanical spacer of 5.08 mm Customer should define witch modules is driven by each shaft (see example of ordering information at the end of the datasheet) P11 OPTION: DETENT MODULES The detents mechanism is housed in a standard P11 module. Up to 21 detent positions available. α Count detents as follows: 1 for CCW position, 1 for full CW position, plus the other positions forming equal resistance increments (linear taper) - not equal angles. Available: CVID - CVIF - CVIM CV3 - CV11 - CV21 β β CVID CVIM CVIF CV11 ° α = n270 -1 β = α + 15° Mechanical endurance: 10 000 cycles ORDERING INFORMATION (First order only for special code creation) CV1M CV1M CV1M J84 CV1D CV1F CV3 CV11 CV21 1 detent at half travel CV1M with accuracy of center point ± 2 % (all tapers except S) 1 detent at CCW position 1 detent at CW position 3 detents 11 detents 21 detents P11 OPTION: NEUTRAL MODULES “EN” Neutral or screen module is housed in a standard P11 module. It is used as a screen between two electrical modules. The leads can be connected to ground. ORDERING INFORMATION (First order only for special code creation) EN EN Neutral module Revision: 24-Sep-15 Document Number: 51031 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11S, P11A www.vishay.com Vishay Sfernice P11 OPTION: CENTER CURRENT TAP “J” The extra terminal is a solder lug connected at 50 % of electrical travel and siluated in the potentiometer module opposite the terminals. Center tap presents a short circuit of 11° of travel. 100 % 50 % • Sealing IP60 0% 11° ORDERING INFORMATION (First order only) J J Center tap P11 OPTION: SPECIAL LINEARITY - CONFORMITY E V The independent linearity (conformity for the non-linear laws) is the maximum gap V between the actual variation curve and the theorical variation curve the nearest to it. The linearity and the conformity are expressed in percentage of the total applied voltage E V ± V max. linearity conformity = ----------------------E They are measured over 90 % of actual electrical travel (centered). Limits of linearity test Effective electrical travel Degrees On request linearity can be guaranteed in linear taper. ORDERING INFORMATION (First order only) J123 J123 J145 Independent linearity ± 3 % (linear law) Independent linearity ± 2 % (linear law) For other request, contact us. P11 OPTION: SPECIAL INTERLINEARITY - INTERCONFORMITY E V It is the maximum deviation between the actual voltage outputs of 2 or more pot modules in the same assembly. It is expressed as a percentage of the total applied voltage, or in dB attenuation. C Interlinearity is measured between 2 pot modules, over 20 to 90 % of the attenuation. V1 V2 Limits of test Effective electrical travel V1 Degrees V2 The interlinearity or interconformity is expressed as a percentage of the total applied voltage: C I % = ------E Or in decibels by comparison between outputs V1 and V2 V1 I dB = 20 log -----V2 ORDERING INFORMATION (First order only) J44 J44 Interlinearity ± 2 % (linear taper) Revision: 24-Sep-15 For other request, contact us. Document Number: 51031 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P11S, P11A www.vishay.com Vishay Sfernice EXAMPLES OF FIRST ORDER INFORMATION FIRST EXAMPLE: Triple module (switch is counted as a module) P 1 MODEL P11 1 STYLE S S 3 Q 3 MODULES 0 A BUSHING Q (Ø 7: L8) P S WITHOUT LOCATING PEG Y 0 CUSTOM SHAFT SLOTTED 0 SOLDER LUGS SPECIAL TO BE DEFINED BY VISHAY ORDERING INFORMATION: PART NUMBER P11S3Q0APSY00..... SHAFT AND BUSHING See drawing of special shaft attached MODULE NO. 1 RSID MODULE NO. 2 103 M A J123 MODULE NO. 3 503 M A J SECOND EXAMPLE: Concentric shaft with 2 modules on each shaft P 1 MODEL P11 1 STYLE S S 5 V 5 MODULES 0 C BUSHING Q (Ø 10: L9.5) C R WITHOUT LOCATING PEG Y 0 STANDARD CONCENTRIC SHAFT CCR 0 SOLDER LUGS SPECIAL TO BE DEFINED BY VISHAY ORDERING INFORMATION: PART NUMBER P11S5V0CCRY00..... SHAFT AND BUSHING MODULE NO. 1 CV1M Driven by outer shaft MODULE NO. 2 502 K A Driven by outer shaft MODULE NO. 3 5.08 Mechanical spacer 5.08 mm MODULE NO. 4 103 M A J44 Driven by inner shaft MODULE NO. 5 103 M A J44 Driven by inner shaft PART NUMBER DESCRIPTION (used on some Vishay document or label, for information only) P11S 2 Q 0 EA S Y00 10K 20 % MODEL MODULES BUSHING LOCATING PEG SHAFT SHAFT STYLE LEADS VALUE TOL. A e3 LEAD TAPER SPECIAL SPECIAL (Pb)-FREE RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 24-Sep-15 Document Number: 51031 14 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000