BSI Certificate 8998

BSI Certificate 8998
www.vishay.com
Vishay Semiconductors
Optocoupler
Test Certificate
Electronic Components
Certificate No
This is to certify that
Submitted by
8998
Optocoupler types as listed in the schedule to this certificate
Vishay Semiconductor GmbH
Theresienstr 2
D-74072
Heilbronn
Germany
Have been tested by BSI in accordance with CP0322 and Test Leaflet 5 to
BS EN 60950-1:2006 + A2:2013 Sub-clauses 2.9.1, 2.9.2, 2.10.1, Annex
G.1.1, Annex G.6, 2.10.4, 2.10.4.3, 2.10.5.2, 2.10.9, 2.10.10, 2.10.11,
2.10.12, 4.7.3.4 (Clauses A.2.1 – A.2.7) and 5.2.2
Details of the scope of the testing are given in BSI report 8424823 and any
addenda thereto.
Signed
Issue date
10 September 2015
Expiry date
09 September 2017
Attention is drawn to the conditions under which this certificate is issued, namely:
1.
The Conditions of Contract for Testing (CP0322) and the specific conditions
(Test Leaflet No TL5 or TL22 as stated above) apply in all respects.
2.
This certificate may not be published except in full including any schedule unless
permission for the publication of an approved extract has been obtained in writing from
the Managing Director of Testing Services
3.
This certificate is valid until the expiry date shown above. It shall then be considered
cancelled and withdrawn and shall not be used in any way whatsoever.
4.
If BSI is satisfied that the manufacturer is marketing what is purporting to be the same
model of component but which has been altered or modified or is in any material aspect
different from the item tested or is satisfied in respect of evidence discovered by or
submitted to it that components purported to be identical to that originally certified are
no longer meeting any part of the requirements of the original examination and tests
then the certificate will be immediately withdrawn and shall not be used in any way
whatsoever.
Prepared by: BSI Appliances, Holywell Park, Ashby Road, Loughborough LE11 3AQ.
Document Number: 85328
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 04-Nov-15
BSI Certificate 8998
www.vishay.com
Vishay Semiconductors
Schedule to Test Certificate No
Schedule Issue date
Test certificate expiry date
8998
10 September 2015
09 September 2017
Optocoupler type 4N2 series:
4N25
4N26
4N27
4N28
4N25GV
4N25V
Optocoupler type 4N3 series:
4N35GV
4N35V
4N35
4N36
4N37
4N38A
Optocoupler type CNY17 series:
CNY17G-1
CNY17-1
CNY17G-2
CNY17-2
CNY17G-3
CNY17-3
CNY17G-4
CNY17-4
Optocoupler type CNY75 series:
CNY75A
CNY75GA
CNY75B
CNY75GB
CNY75C
CNY75GC
Optocoupler type CQY80N series:
CQY80N
CQY80NG
Optocoupler type K233P series:
K233P
K233PG
And lead bending options G, S, S1, M
rated as below.
1.
2.
3.
4.
5.
6.
7.
8.
Insulation system:
Mains supply voltage:
Working voltage:
Peak working voltage:
Overvoltage category:
Pollution degree:
Flammability - Sub-clause 4.7.3.4 (Clause A.2.7):
Maximum operating temperature:
Reinforced
d 250 V r.m.s.
d 320 V r.m.s.
850 V Peak
II
2
Pass
110 qC
Document Number: 85328
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 04-Nov-15
BSI Certificate 8998
www.vishay.com
Vishay Semiconductors
Optocoupler type TCDT110 series:
TCDT1100
TCDT1102
TCDT1100G TCDT1101
TCDT1102G TCDT1103
TCDT1101G
TCDT1103G
Optocoupler type TCDT1110 series:
TCDT1110
TCDT1110G
Optocoupler type TCDT112 series:
TCDT1120
TCDT1123
TCDT1120G TCDT1122
TCDT1123G TCDT1124
TCDT1122G
TCDT1124G
And lead bending options G, S, S1, M
rated as below.
1.
2.
3.
4.
5.
6.
7.
8.
Insulation system:
Mains supply voltage:
Working voltage:
Peak working voltage:
Overvoltage category:
Pollution degree:
Flammability - Sub-clause 4.7.3.4 (Clause A.2.7):
Maximum operating temperature:
Reinforced
d 250 V r.m.s.
d 320 V r.m.s.
850 V Peak
II
2
Pass
110 qC
This schedule must be read in conjunction with the test certificate identified
above and may not be published except in full including the certificate.
Prepared by: BSI Appliances, Holywell Park, Ashby Road, Loughborough LE11 3AQ
Document Number: 85328
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 04-Nov-15