10-FZ122PA100FC01-P999F58 10-F0122PA100FC01-P999F59 preliminary datasheet Output Inverter Application fastPHASE0 1200V/100A General conditions 3phase SPWM VGEon = 15 V VGEoff = -15 V Rgon = 4 Ω Rgoff = 4 Ω IGBT Figure 1 Typical average static loss as a function of output current Ploss = f(Iout) 160 Ploss (W) 400 Ploss (W) FRED Figure 2 Typical average static loss as a function of output current Ploss = f(Iout) 350 140 Mi*cosf i= -1 Mi*cosfi = 1 300 120 250 100 200 80 150 60 100 40 20 50 Mi*cosfi = -1 Mi*cosfi = 1 0 0 0 At Tj = 20 40 125 60 80 100 120 140 Iout (A) 0 160 At Tj = °C Mi*cosφ from -1 to 1 in steps of 0,2 40 125 60 80 100 120 140 Iout (A) 160 °C Mi*cosφ from -1 to 1 in steps of 0,2 IGBT Figure 3 Typical average switching loss as a function of output current Ploss = f(Iout) 160.0 140.0 FRED Figure 4 Typical average switching loss as a function of output current Ploss (W) Ploss (W) 20 Ploss = f(Iout) 70.0 60.0 fsw = 16kHz fsw = 16kHz 120.0 50.0 100.0 40.0 80.0 30.0 60.0 20.0 40.0 10.0 20.0 fsw = 2kHz fsw = 2kHz 0.0 0.0 0 20 40 60 80 100 At Tj = 125 DC link = fsw from 600 V 2 kHz to 16 kHz in steps of factor 2 copyright by Vincotech 120 0 140 Iout (A) 160 °C 1 20 40 60 80 100 At Tj = 125 DC link = fsw from 600 V 2 kHz to 16 kHz in steps of factor 2 120 140 160 Iout (A) °C Revision: 1 10-FZ122PA100FC01-P999F58 10-F0122PA100FC01-P999F59 preliminary datasheet Output Inverter Application fastPHASE0 Phase Figure 5 Typical available 50Hz output current as a function Mi*cosφ 1200V/100A Phase Figure 6 Typical available 50Hz output current as a function of switching frequency Iout = f(Mi*cos φ) Iout (A) Iout (A) 160 140 Iout = f(fsw) 140 120 Th = 60°C 120 100 Th = 60°C 100 80 80 60 60 Th = 100°C 40 40 Th = 100°C 20 20 0 -1.0 0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 At Tj = 125 DC link = fsw = Th from 600 V 4 kHz 60 °C to 100 °C in steps of 5 °C 0.4 0.6 0.8 1.0 Mi*cos φ 1 At Tj = °C 10 125 fsw (kHz) 100 °C DC link = 600 V Mi*cos φ = 0.8 Th from 60 °C to 100 °C in steps of 5 °C Phase Figure 7 Typical available 0Hz output current as a function Ioutpeak = f(fsw) of switching frequency Iout (Apeak) -1.00 -0.80 Iout (A) Phase Figure 8 Typical available 50Hz output current as a function of Iout = f(fsw, Mi*cos φ) Mi*cos φ and switching frequency 120 100 -0.60 -0.40 80 120.0-140.0 Th = 60°C 100.0-120.0 80.0-100.0 60.0-80.0 0.00 40.0-60.0 20.0-40.0 Mi*cosfi -0.20 60 0.20 0.0-20.0 40 0.40 0.60 20 0.80 Th = 100°C 0 1.00 1 2 4 8 16 32 64 1 fsw 10 At Tj = 125 °C At Tj = 125 DC link = Th = 600 80 V °C DC link = Th from 600 V 60 °C to 100 °C in steps of 5 °C Mi = 0 copyright by Vincotech 2 fsw (kHz) 100 °C Revision: 1 10-FZ122PA100FC01-P999F58 10-F0122PA100FC01-P999F59 preliminary datasheet Output Inverter Application fastPHASE0 Inverter Figure 9 Inverter Figure 10 Typical efficiency as a function of output power efficiency=f(Pout) efficiency (%) Typical available peak output power as a function of Pout=f(Th) heatsink temperature Pout (kW) 1200V/100A 70.0 60.0 100.0 99.0 2kHz 98.0 50.0 97.0 16kHz 96.0 40.0 2kHz 95.0 30.0 94.0 16kHz 20.0 93.0 92.0 10.0 91.0 0.0 90.0 60 65 70 75 80 85 At Tj = 125 DC link = Mi = cos φ= fsw from 600 V 1 0.80 2 kHz to 16 kHz in steps of factor 2 90 95 100 Th ( o C) 0.0 °C 10.0 20.0 30.0 40.0 50.0 At Tj = 125 DC link = Mi = cos φ= fsw from 600 V 1 0.80 2 kHz to 16 kHz in steps of factor 2 60.0 70.0 80.0 90.0 Pout (kW) °C Inverter Figure 11 Overload (%) Typical available overload factor as a function of Ppeak / Pnom=f(Pnom,fsw) motor power and switching frequency 400 350 300 250 200 Motor nominal power (HP/kW) Switching frequency (kHz) 150 100 15,00 / 11,03 20,00 / 14,71 25,00 / 18,39 30,00 / 22,07 40,00 / 29,42 50,00 / 36,78 1 354 265 212 177 133 0 2 345 259 207 172 129 0 4 329 246 197 164 123 0 8 299 224 179 149 112 0 16 248 186 149 124 0 0 At Tj = 125 °C DC link = Mi = 600 1 V cos φ= fsw from Th = 0.8 1 kHz to 16kHz in steps of factor 2 80 °C Motor eff = 0.85 copyright by Vincotech 3 Revision: 1 10-FZ122PA100FC01-P999F58 10-F0122PA100FC01-P999F59 preliminary datasheet Output Inverter Application fastPHASE0 1200V/100A General conditions Half Bridge SPWM VGEon = 15 V VGEoff = -15 V Rgon = 4 Ω Rgoff = 4 Ω IGBT Figure 1 Typical average static loss as a function of output current Ploss = f(Iout) 400 160 Ploss (W) Ploss (W) FRED Figure 2 Typical average static loss as a function of output current Ploss = f(Iout) 350 300 140 Voutpk/Vin* cosfi=-1 Voutpk/Vin* cosfi=1 120 250 100 200 80 150 60 100 40 20 50 Voutpk/Vin* cosfi=1 Voutpk/Vin* cosfi=-1 0 0 0 At Tj = 20 40 125 60 80 100 120 140 Iout (A) 0 160 At Tj = °C Mi*cosfi from -1 to 1 in steps of 0,2 20 40 125 60 80 100 120 140 Iout (A) 160 °C Mi*cosfi from -1 to 1 in steps of 0,2 IGBT Figure 3 Typical average switching loss as a function of output current FRED Figure 4 Typical average switching loss as a function of output current Ploss = f(Iout) Ploss (W) Ploss = f(Iout) 180.0 Ploss (W) 70.0 fsw="to" kHz 160.0 60.0 fsw="to"kHz 140.0 50.0 120.0 40.0 100.0 80.0 30.0 60.0 20.0 40.0 10.0 20.0 fsw="from" kHz fsw="from" kHz 0.0 0.0 0 At Tj = 20 40 125 60 80 100 120 0 140 Iout (A) 160 At Tj = °C DC link = 320 V fsw from 4 kHz to 32 kHz in steps of factor 2 copyright by Vincotech 20 125 40 60 80 100 120 140 160 Iout (A) °C DC link = 320 V fsw from 4 kHz to 32 kHz in steps of factor 2 4 Revision: 1 10-FZ122PA100FC01-P999F58 10-F0122PA100FC01-P999F59 preliminary datasheet Output Inverter Application fastPHASE0 Phase Figure 5 Typical available 50Hz output current as a function Mi*cosfi 1200V/100A Phase Figure 6 Typical available 50Hz output current as a function of switching frequency Iout = f(Mi*cosfi) Iout (A) Iout (A) 160 140 Iout = f(fsw) 140 120 Th=60°C 120 Th=60°C 100 100 80 80 60 60 Th=100°C Th=100°C 40 40 20 20 0 0 -1.0 -0.8 At Tj = -0.6 -0.4 125 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 Voutpk/Vin*cosfi 1 At Tj = °C DC link = 320 V fsw = 18 kHz Th from 60 °C to 100 °C in steps of 5 °C 10 125 fsw (kHz) 100 °C DC link = 320 V Mi*cosfi = 1 Th from 60 °C to 100 °C in steps of 5 °C Phase Figure 7 Typical available 0Hz output current as a function of switching frequency Iout=f(fsw) 160 Iout (A) -1.00 -0.80 Iout (A) Phase Figure 8 Typical available 50Hz output current as a function of Voutpk/Vin*cosfi and switching frequency Iout=f(fsw,Mi*cosfi) 140 Th=60°C -0.60 120 125.0-140.0 110.0-125.0 -0.20 95.0-110.0 80.0-95.0 0.00 65.0-80.0 50.0-65.0 Voutpk/Vin*cosfi -0.40 100 80 0.20 60 35.0-50.0 Th=100°C 0.40 40 0.60 20 0.80 1.00 2 4 8 16 32 0 64 1 fsw (kHz) 10 At Tj = 125 °C At Tj = 125 °C DC link = Th = 320 80 V °C DC link = Mi*cosfi = 320 0 V fsw (kHz) 100 Th from 60 °C to 100 °C in steps of 5 °C copyright by Vincotech 5 Revision: 1 10-FZ122PA100FC01-P999F58 10-F0122PA100FC01-P999F59 preliminary datasheet Output Inverter Application fastPHASE0 Inverter Figure 9 Inverter Figure 10 Typical efficiency as a function of output power efficiency=f(Pout) efficiency (%) Typical available peak output power as a function of Pout=f(Th) heatsink temperature Pout (kW) 1200V/100A 30.0 25.0 100.0 99.0 98.0 20.0 97.0 "from" kHz "from" kHz 96.0 15.0 95.0 10.0 "to" kHz 94.0 "to" kHz 93.0 5.0 92.0 0.0 91.0 60 At Tj = 65 70 125 75 80 85 90 95 100 Th ( o C) 0.0 At Tj = °C DC link = 320 V Mi = 1 cosfi = 1 fsw from 4 kHz to 32 kHz in steps of factor 2 copyright by Vincotech 5.0 125 10.0 15.0 20.0 25.0 30.0 35.0 40.0 Pout (kW) °C DC link = 320 V Mi = 1 cosfi = 1 fsw from 4 kHz to 32 kHz in steps of factor 2 6 Revision: 1 10-FZ122PA100FC01-P999F58 10-F0122PA100FC01-P999F59 preliminary datasheet Output Inverter Application fastPHASE0 1200V/100A General conditions H Bridge SPWM VGEon = 15 V VGEoff = -15 V Rgon = 4 Ω Rgoff = 4 Ω IGBT Figure 1 Typical average static loss as a function of output current Ploss = f(Iout) 400 160 Ploss (W) Ploss (W) FRED Figure 2 Typical average static loss as a function of output current Ploss = f(Iout) 350 140 Voutpk/Vin* cosfi=-1 Voutpk/Vin* cosfi=1 300 120 250 100 200 80 150 60 100 40 50 20 Voutpk/Vin* cosfi=-1 Voutpk/Vin* cosfi=1 0 0 0 At Tj = 20 40 125 60 80 100 120 140 Iout (A) 0 160 At Tj = °C Mi*cosfi from -1 to 1 in steps of 0,2 20 40 125 60 80 100 120 140 Iout (A) 160 °C Mi*cosfi from -1 to 1 in steps of 0,2 IGBT Figure 3 Typical average switching loss as a function of output current FRED Figure 4 Typical average switching loss as a function of output current Ploss = f(Iout) Ploss (W) Ploss = f(Iout) 180.0 Ploss (W) 70.0 fsw="to" kHz 160.0 60.0 fsw="to"kHz 140.0 50.0 120.0 40.0 100.0 80.0 30.0 60.0 20.0 40.0 10.0 20.0 fsw="from" kHz fsw="from" kHz 0.0 0.0 0 At Tj = 20 40 125 60 80 100 120 0 140 Iout (A) 160 At Tj = °C DC link = 600 V fsw from 4 kHz to 32 kHz in steps of factor 2 copyright by Vincotech 20 125 40 60 80 100 120 140 160 Iout (A) °C DC link = 600 V fsw from 4 kHz to 32 kHz in steps of factor 2 7 Revision: 1 10-FZ122PA100FC01-P999F58 10-F0122PA100FC01-P999F59 preliminary datasheet Output Inverter Application fastPHASE0 Phase Figure 5 Typical available 50Hz output current as a function Mi*cosfi 1200V/100A Phase Figure 6 Typical available 50Hz output current as a function of switching frequency Iout = f(Mi*cosfi) Iout (A) Iout (A) 160 140 Iout = f(fsw) 140 120 120 Th=60°C 100 Th=60°C 100 80 80 60 60 Th=100°C Th=100°C 40 40 20 20 0 -1.0 -0.8 At Tj = -0.6 125 -0.4 -0.2 0.0 0.2 0.4 Voutpk/Vin*cosfi 0.6 0.8 1.0 0 1 At Tj = °C DC link = 600 V fsw = 40 kHz Th from 60 °C to 100 °C in steps of 5 °C 10 125 fsw (kHz) 100 °C DC link = 600 V Mi*cosfi = 1 Th from 60 °C to 100 °C in steps of 5 °C Phase Figure 7 Phase Figure 8 Typical available 50Hz output current as a function of Voutpk/Vin*cosfi and switching frequency Iout=f(fsw,Mi*cosfi) Typical available 0Hz output current as a function of switching frequency Iout=f(fsw) 160 Iout (A) -1.00 -0.80 140 Th=60°C Iout (A) -0.60 120 125.0-140.0 110.0-125.0 -0.20 95.0-110.0 80.0-95.0 0.00 65.0-80.0 50.0-65.0 Voutpk/Vin*cosfi -0.40 100 80 0.20 60 35.0-50.0 Th=100°C 0.40 40 0.60 20 0.80 1.00 2 4 8 16 32 0 64 1 fsw (kHz) 10 At Tj = 125 °C At Tj = 125 °C DC link = Th = 600 80 V °C DC link = Mi*cosfi = 600 0 V fsw (kHz) 100 Th from 60 °C to 100 °C in steps of 5 °C copyright by Vincotech 8 Revision: 1 10-FZ122PA100FC01-P999F58 10-F0122PA100FC01-P999F59 preliminary datasheet Output Inverter Application fastPHASE0 Inverter Figure 9 Inverter Figure 10 Typical efficiency as a function of output power efficiency=f(Pout) efficiency (%) Typical available peak output power as a function of Pout=f(Th) heatsink temperature Pout (kW) 1200V/100A 30.0 25.0 100.0 98.0 "from" kHz 96.0 94.0 "to" kHz 20.0 92.0 "from" kHz 15.0 90.0 88.0 10.0 "to" kHz 86.0 84.0 5.0 82.0 0.0 80.0 60 At Tj = 65 70 125 75 80 85 90 95 100 Th ( o C) 0.0 At Tj = °C DC link = 600 V Mi = 1 cosfi = 1 fsw from 4 kHz to 32 kHz in steps of factor 2 copyright by Vincotech 5.0 125 10.0 15.0 20.0 25.0 30.0 35.0 40.0 Pout (kW) °C DC link = 600 V Mi = 1 cosfi = 1 fsw from 4 kHz to 32 kHz in steps of factor 2 9 Revision: 1 10-FZ122PA100FC01-P999F58 10-F0122PA100FC01-P999F59 preliminary datasheet PRODUCT STATUS DEFINITIONS Datasheet Status Target Preliminary Final Product Status Definition Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. The data contained is exclusively intended for technically trained staff. First Production This datasheet contains preliminary data, and supplementary data may be published at a later date. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. Full Production This datasheet contains final specifications. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. DISCLAIMER The information given in this datasheet describes the type of component and does not represent assured characteristics. For tested values please contact Vincotech.Vincotech reserves the right to make changes without further notice to any products herein to improve reliability, function or design. Vincotech does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. copyright by Vincotech 10 Revision: 1