Datasheet

UNISONIC TECHNOLOGIES CO., LTD
U74LVC1G02
CMOS IC
SINGLE 2-INPUT NOR GATE

DESCRIPTION
The U74LVC1G02 is a 2-input NOR gate device which provides
the Function Y=A+B in positive logic.
This device has power-down protective circuit preventing device
from destruction when it is powered down.

FEATURES
* Operation Voltage Range: 1.6V ~ 5.5V
* Low Power Current: ICC=10μA (Max.)
* ±24mA Output Drive (VCC=3.0V)
* Power Down Protection

ORDERING INFORMATION
Ordering Number
U74LVC1G02G-AE5-R
U74LVC1G02G-AF5-R
U74LVC1G02G-AL5-R
U74LVC1G02G-K06-1010-R

Package
SOT-23-5
SOT-25
SOT-353
DFN-6(1.0×1.0)
Packing
Tape Reel
Tape Reel
Tape Reel
Tape Reel
MARKING
SOT-23-5 / SOT-25 / SOT-353
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
DFN-6(1.0×1.0)
1 of 5
QW-R502-400.E
U74LVC1G02

PIN CONFIGURATION

FUNCTION TABLE
INPUT(A)
INPUT(B)
H
H
H
L
L
H
L
L
Note: H: HIGH voltage level; L: LOW voltage level.

CMOS IC
OUTPUT(Y)
L
L
L
H
LOGIC DIAGRAM (positive logic)
Logic Symbol
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
IEC Logic Symbol
2 of 5
QW-R502-400.E
U74LVC1G02

CMOS IC
ABSOLUTE MAXIMUM RATING
PARAMETER
Supply Voltage
Input Voltage
RATINGS
UNIT
-0.5 ~ +6.5
V
-0.5 ~ +6.5
V
Output in the high or low state
-0.5 ~ VCC +0.5
V
Output Voltage
VOUT
Output in the power-off state
-0.5 ~ +6.5
V
Continuous VCC or GND Current
ICC
±100
mA
Continuous Output Current
IOUT
VOUT=0 to VCC
±50
mA
Input Clamp Current
IIK
VIN<0
-50
mA
Output Clamp Current
IOK
VOUT<0
-50
mA
Storage Temperature Range
TSTG
-65 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

SYMBOL
VCC
VIN
THERMAL DATA
PARAMETER
Junction to Ambient

TEST CONDITIONS
SYMBOL
SOT-23-5
SOT-25
SOT-353
θJA
RATINGS
280
230
350
UNIT
°C/W
°C/W
°C/W
RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL
Supply Voltage
VCC
Input Voltage
Output Voltage
VIN
VOUT
Input Transition Rise or Fall
Rate
∆t/∆v
Operating Temperature
TEST CONDITIONS
Operating
Data retention only
High or low state
VCC=1.8V±0.15V,2.5V±0.2V
VCC=3.3V±0.3V
VCC=5V±0.5V
TA
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
1.65
1.5
0
0
-40
TYP
MAX
5.5
5.5
VCC
20
10
5
125
UNIT
V
V
V
V
ns/V
ns/V
ns/V
°C
3 of 5
QW-R502-400.E
U74LVC1G02

CMOS IC
ELECTRICAL CHARACTERISTICS (TA =25°C, unless otherwise specified)
PARAMETER
SYMBOL
High-Level Input Voltage
VIH
Low-Level Input Voltage
VIL
High-Level Output Voltage
VOH
Low-Level Output Voltage
VOL
Input Leakage Current
Power OFF Leakage Current
II(LEAK)
IOFF
Quiescent Supply Current
IQ
Additional Quiescent Supply
Current Per Input Pin
Input Capacitance

∆IQ
CI
SWITCHING CHARACTERISTICS (TA =25°C , unless otherwise specified)
PARAMETER
SYMBOL
tPLH / tPHL
Propagation delay from input
(A or B) to output(Y)
tPLH / tPHL

TEST CONDITIONS
MIN
TYP
MAX UNIT
0.65×VCC
V
VCC=1.65V ~ 1.95V
VCC=2.3V ~ 2.7V
1.7
V
VCC=3V ~ 3.6V
2
V
0.7×VCC
VCC=4.5V ~ 5.5V
V
0.35×VCC
VCC=1.65V ~ 1.95V
V
VCC=2.3V ~ 2.7V
0.7
V
VCC=3V ~ 3.6V
0.8
V
0.3×VCC
VCC=4.5V ~ 5.5V
V
VCC=1.65 ~ 5.5V, IOH=-100μA
VCC-0.1
V
VCC=1.65V, IOH=-4mA
1.2
V
VCC=2.3V, IOH=-8mA
1.9
V
IOH=-16mA
2.4
V
VCC=3.0V
IOH=-24mA
2.3
V
3.8
V
VCC=4.5V, IOH=-32mA
VCC=1.65 ~ 5.5V, IOL=100μA
0.1
V
VCC=1.65V, IOL=4mA
0.45
V
VCC=2.3V, IOL=8mA
0.3
V
IOL=16mA
0.4
V
VCC=3.0V
IOL=24mA
0.55
V
0.55
V
VCC=4.5V, IOH=32mA
VCC=0 ~ 5.5V, VIN=5.5V or GND
±5
μA
VCC=0V, VIN or VOUT=5.5V
μA
±10
VCC=1.65 ~ 5.5V, VIN=VCC or GND,
10
μA
IOUT=0A
VCC=3 ~ 5.5V, One input at VCC-0.6V,
500
μA
Other inputs at VCC or GND
VCC=3.3V, VIN=VCC or GND
4
pF
TEST CONDITIONS
VCC=1.8±0.15V
VCC=2.5±0.2V
CL=15pF
RL=1MΩ
VCC=3.3±0.3V
VCC=5±0.5V
VCC=1.8±0.15V, RL=1KΩ
CL=30pF
VCC=2.5±0.2V, RL=500Ω
VCC=3.3±0.3V
CL=50pF
RL=500Ω
VCC=5±0.5v
MIN
1.9
0.8
0.8
0.8
2.8
1.2
1
1
TYP
MAX
7.2
4.4
3.6
3.4
8
5.5
4.5
4
UNIT
ns
ns
ns
ns
ns
ns
ns
ns
MAX
UNIT
pF
pF
pF
pF
OPERATING CHARACTERISTICS (f=10MHz, TA =25°C , unless otherwise specified)
PARAMETER
SYMBOL
Power Dissipation Capacitance
CPD
TEST CONDITIONS
VCC=1.8V
VCC=2.5V
VCC=3.3V
VCC=5.0V
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP
23
23
23
25
4 of 5
QW-R502-400.E
U74LVC1G02

CMOS IC
TEST CIRCUIT AND WAVEFORMS
VCC
1.8V±0.15V
2.5V±0.2V
3.3V±0.3V
5V±0.5V
1.8V±0.15V
2.5V±0.2V
3.3V±0.3V
5V±0.5V
Inputs
VIN
VCC
VCC
3V
VCC
VCC
VCC
3V
VCC
tR, tF
≤2ns
≤2ns
≤2.5ns
≤2.5ns
≤2ns
≤2ns
≤2.5ns
≤2.5ns
VM
CL
RL
VCC/2
VCC/2
1.5V
VCC/2
VCC/2
VCC/2
1.5V
VCC/2
15pF
15pF
15pF
15pF
30pF
30pF
50pF
50pF
1MΩ
1MΩ
1MΩ
1MΩ
1KΩ
500Ω
500Ω
500Ω
Note: CL includes probe and jig capacitance.
All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50Ω.
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R502-400.E