UNISONIC TECHNOLOGIES CO., LTD U74LVC1G86 CMOS IC SINGLE 2-INPUT EXCLUSIVE-OR GATE DESCRIPTION The U74LVC1G86 is a single 2-input EXCLUSIVE-OR gate which provides the Function Y A B or Y AB A B in positive logic. Inputs can be driven from either 3.3V or 5V devices. These features allow the use of these devices in a mixed 3.3V and 5V environment. This device is fully specified for partial Power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. FEATURES * Operate from 1.65V to 5.5V * Inputs accept voltages to 5.5V * IOFF supports partial-power-down mode * Low power dissipation * Max tPD of 4 ns at 3.3V ORDERING INFORMATION Ordering Number U74LVC1G86G-AE5-R U74LVC1G86G-AL5-R Package SOT-23-5 SOT-353 Packing Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-A73.B U74LVC1G86 PIN CONFIGURATION FUNCTION TABLE INPUT(A) INPUT(B) L L H L L H H H Note: H: HIGH voltage level; L: LOW voltage level; CMOS IC OUTPUT(Y) L H H L LOGIC DIAGRAM (positive logic) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-A73.B U74LVC1G86 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL VCC VIN Supply Voltage Input Voltage RATINGS -0.5 ~ +6.5 -0.5 ~ +6.5 -0.5 ~ VCC+0.5 UNIT V V V Output in the high or low state VOUT Output in the high-impedance or -0.5 ~ +6.5 V power-off state Continuous VCC or GND Current ICC ±100 mA Continuous Output Current (VOUT=0 to VCC) IOUT ±50 mA Input Clamp Current (VIN<0) IIK -50 mA Output Clamp Current (VOUT<0) IOK -50 mA Storage Temperature Range TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Output Voltage RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL Supply Voltage VCC Input Voltage Output Voltage VIN VOUT High-level Output Current IOH Low-level Output Current IOL Operating Temperature TA Input Transition Rise or Fall Rate ∆t/∆v TEST CONDITIONS Operating Data retention only High or low state VCC=1.65V VCC=2.3V VCC=3V VCC=3V VCC=4.5V VCC=1.65V VCC=2.3V VCC=3V VCC=3V VCC=4.5V -40 VCC=1.8V±0.15V, 2.5V±0.2V VCC=3.3V±0.3V VCC=5V±0.5V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.65 1.5 0 0 TYP MAX 5.5 5.5 VCC -4 -8 -16 -24 -32 4 8 16 24 32 85 20 10 5 UNIT V V V V mA mA mA mA mA mA mA mA mA mA °C ns/V ns/V ns/V 3 of 5 QW-R502-A73.B U74LVC1G86 CMOS IC ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER High-level Input Voltage Low-level Input Voltage High-Level Output Voltage Low-Level Output Voltage Input Leakage Current Power OFF Leakage Current Quiescent Supply Current SYMBOL VIH VIL VOH VOL II(LEAK) Ioff ICC Additional Quiescent Supply Current Per Input Pin ∆ICC Input Capacitance CI MIN 0.65×VCC 1.7 2 0.7×VCC TYP MAX 0.1 0.45 0.3 0.4 0.55 0.55 ±5 ±10 UNIT V V V V V V V V V V V V V V V V V V V V μA μA 10 μA 500 μA 0.35×VCC 0.7 0.8 0.3×VCC VCC-0.1 1.2 1.9 2.4 2.3 3.8 6 pF SWITCHING CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER SYMBOL Propagation delay from input to output tPLH tPHL Propagation delay from input to output tPLH tPHL TEST CONDITIONS VCC=1.65V to 1.95V VCC=2.3V to 2.7V VCC=3V to 3.6V VCC=4.5V to 5.5V VCC=1.65V to 1.95V VCC=2.3V to 2.7V VCC=3V to 3.6V VCC=4.5V to 5.5V VCC=1.65 ~ 5.5V, IOH=-100μA VCC=1.65V, IOH=-4mA VCC=2.3V, IOH=-8mA IOL=16mA VCC=3.0V IOL=24mA VCC=4.5V, IOH=-32mA VCC=1.65 ~ 5.5V, IOL=100μA VCC=1.65V, IOL=4mA VCC=2.3V, IOL=8mA IOL=16mA VCC=3.0V IOL=24mA VCC=4.5V, IOL=32mA VCC=0 ~ 5.5V, VIN=5.5V or GND VCC=0V, VIN or VOUT=5.5V VCC=1.65 ~ 5.5V, VIN=VCC or GND, IOUT=0 VCC=3 ~ 5.5V, One input at VCC-0.6V, Other inputs at VCC or GND VCC=3.3V, VIN=VCC or GND TEST CONDITIONS VCC=1.8±0.15V,CL=15pF, RL=1MΩ VCC=2.5±0.2V,CL=15pF, RL=1MΩ VCC=3.3±0.3V,CL=15pF, RL=1MΩ VCC=5±0.5V,CL=15pF, RL=1MΩ VCC=1.8±0.15V,CL=30pF, RL=1KΩ VCC=2.5±0.2V,CL=30pF, RL=500Ω VCC=3.3±0.3V,CL=50pF, RL=500Ω VCC=5±0.5V,CL=50pF, RL=500Ω MIN 2.1 1 0.6 0.8 3.5 1.8 1.3 1 TYP MAX 9.1 4.5 4 3.3 9.9 5.5 5 4 UNIT ns ns ns ns ns ns ns ns MAX UNIT pF pF pF pF OPERATING CHARACTERISTICS (f=10MHZ, TA =25°C , unless otherwise specified) PARAMETER Power Dissipation Capacitance SYMBOL CPD TEST CONDITIONS VCC=1.8V VCC=2.5V VCC=3.3V VCC=5V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 22 22 22 24 4 of 5 QW-R502-A73.B U74LVC1G86 CMOS IC TEST CIRCUIT AND WAVEFORMS From Output CL VCC RL Inputs VM VIN tR, tF 1.8V±0.15V VCC ≤2ns VCC/2 2.5V±0.2V VCC ≤2ns VCC/2 3.3V±0.3V 3V ≤2.5ns 1.5V 5V±0.5V VCC ≤2.5ns VCC/2 CL RL 15pF 30pF 15pF 30pF 15pF 50pF 15pF 50pF 1MΩ 1KΩ 1MΩ 500Ω 1MΩ 500Ω 1MΩ 500Ω Notes: 1. CL includes probe and jig capacitance. 2. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50Ω. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-A73.B