■ XG5 IDC Tools ■ Tools Simple IDC Tool Simple Wire IDC Tool Set XY2B-7006 XY2B-2104-N This tool is a compact, light-weight model, ideal for use in the laboratory or for maintenance. Specifications This Wire IDC Tool Set is designed for XG5 Discrete-wire Connectors. Applicable con- XG5M-N nector Applicable wire AWG24 to AWG28 (with an insulation outer diameter of 1.1 to 1.3 mm) Dimensions 25 (W) × 100 (D) × 80 (H) Weight Approx. 180 g ■ Tools for the XG5 Contact Removal Tool Specifications Stroke 13 mm Motor speed 83/100 rpm (50/60 Hz) Feed pitch 2.54 mm Operation Foot switch Weight About 6 kg Rated voltage 0.5 A, 100 VAC (50/60 Hz) Fuse 1A Dimensions 120 × 200 × 225 mm (W × D × H) XY2E-0001 Note: For function and operation details, see the user’s manual for the Pressure Welder provided separately. Lance Holding Part Applicable Connectors and Wires Used to remove from the housing, contacts which are wrong. Replacing Contacts Use only this tool to remove incorrect IDC contacts. 1. Remove the cover. 2. Insert the tool into the housing lance holes and push the lance into the housing. 3. Pull out the contact while holding the lance down. 4. Insert a new contact. Applicable Connector Applicable wires UL file No. Size [No. of wires/ diameter (mm)] Cross-sectional area (mm) Covering diameter (mm) XG5M-@@31-N XG5M-@@32-N XG5M-@@33-N No. 1 UL1061 AWG24 [7/0.203] 0.21 1.1 XG5M-@@34-N XG5M-@@35-N XG5M-@@36-N No. 2 UL1007 AWG26 [7/0.16] 0.13 1.3 AWG28 [7/0.127] 0.09 1.2 Note: Use only wires specified in the table above. XY2E-0001 Lance hole Housing 8 Size No. IDC Connectors for Discrete Wires XG5