PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com THT QUARTZ CRYSTAL SERIES HC-49/US FEATURES + + + + + High reliability for low cost Low profile—3.5 and 2.5 mm max. package height Extended temperature range to -40/+125°C Excellent clock signal generator for CPU´s Qualified for automotive applications PB FREE / ROHS-2 2011/65/EU COMPLIANT GENERAL DATA PARAMETERS PRODUCT FEATURES AND CONDITIONS SMD-CRYSTAL SERIES HC-49/U NUMBER OF LEADS HC-49/US HC-49/3US = 2 (standard) = 3 (middle pin for grounding) OPTIONS FOR HOUSING Inuslator Cutted leads = for 2 leads and 3 leads housing = only for 2 leads housing FREQUENCY RANGE 3.5 ~ 40.0 MHz AT-Fundamental 24.0 ~ 40.5504 MHz BT-Fundamental 24.576 ~ 80.0 MHz 3rd Overtone FREQUENCY TOLERANCES AT 25°C ±5 ppm ~ ±50 ppm LOAD CAPACITANCE (CL) 6 pF ~ 50 pF or Series WORKING TEMPERATURE RANGES 0/+50°C ~ -40/+125°C SHUNT CAPACITANCE (Co) 7 pF max. DRIVE LEVEL 100 μW typical (0.01 mW ~ 1 mW possible on request) AGING ±3 ~ ±5 ppm per year standard (±2 ppm available as option) INSULATION RESISTANCE >500 MΩ DC/100V ±10% STORAGE TEMPERATURE -55°/+125°C DELIVERY FORM Standard = Bulks for 2 leads and 3 leads housing Option = Paper Tape on Reel only for 2 leads housing OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION FREQUENCY STABILITY VS. TEMPERATURE ±5ppm ±10ppm ±15ppm ±20ppm ±30ppm ±50ppm ±100ppm 0°/+50°C + + + + + + + -10°/+60°C + + + + + + + 0°/+70°C + + + + + + -20°/+70°C + + + + + + + + + + + + + -40°/+85°C -40°/+125°C CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 1 OF 4 I SPEC 01 I REV.00 I APRIL 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com DIMENSIONS OF HC-49/US DIMENSIONS OF HC-49/3US REEL SPECIFICATION OF HC-49/US (only for 2pin Housing) CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 2 OF 4 I SPEC 01 I REV.00 I APRIL 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com ORDERING INFORMATION FREQUENCY SERIES HC-49/US OR HC-49/3US 3.5 ~ 40.0 MHz AT-FUNDAMENTAL 24.0 ~ 40.5504 MHz BT-FUNDAMENTAL 24.576 ~ 80.0 MHz 3rd OVERTONE FREQUENCY TOLERANCE AT 25°C ±5 PPM ~ ±50 PPM TEMPERATURE RANGE 0°/+50°C -10°/+60°C 0°/+70°C -20°/+70°C -40°/+85°C -40°/+125°C HC-49/US 3.5 27.000 MHz 30/50/-40+125/20pF HOUSING 3.5 mm 2.5 mm 3.0 mm opt. TEMPERATURE STABILITY See Table „FREQUENCY STABILITY VS. TEMPERATURE“ LOAD CAPACITANCE 6 pF ~ 50 pF or Series EXAMPLE: HC-49/US 3.5 27.000 MHz 30/50/-40+125/20pF PLEASE INDICATE YOUR REQUIRED PARAMETERS RESONANCE RESISTANCE FREQUENCY IN MHz VIBRATION MODE ESR MAX. IN Ω 3.5 ~ 3.79 MHz AT Fund. 120 3.9 ~ 4.99 MHz AT Fund. 100 4.5 ~ 5.99 MHz AT Fund. 90 6.0 ~ 6.99 MHz AT Fund. 70 7.0 ~ 7.99 MHz AT Fund. 70 8.0 ~ 8.99 MHz AT Fund. 60 9.0 ~ 9.99 MHz AT Fund. 60 10.0 ~ 11.99 MHz AT Fund. 50 12.0 ~ 19.99 MHz AT Fund. 40 20.0 ~ 26.99 MHz AT Fund. 30 27.0 ~ 40.00 MHz AT Fund. 25 27.0 ~ 40.00 MHz 3rd OT AT 100 40.0 ~ 40.00 MHz 3rd OT AT 60 CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 3 OF 4 I SPEC 01 I REV.00 I APRIL 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com PREMIUM QUALITY BY PETERMANN-TECHNIK OUR COMPANY IS CERTIFIED ACCORDING TO ISO 9001:2008 IN OCTOBER 2013 BY THE DMSZ CERTIFIKATION GMBH. THIS IS FOR YOU TO ENSURE THAT THE PRINCIPLES OF QUALITY MANAGEMENT ARE FULLY IMPLEMENTED IN OUR QUALITY MANAGEMENT SYSTEM AND QUALITY CONTROL METHODS ALSO DOMINATE OUR QUALITY STANDARDS. © PETERMANN-TECHNIK GmbH 2015. The information contained herein is subject to change at any time without notice. PETERMANN-TECHNIK owns all rights, title and interest to the intellectual property related to PETERMANN-TECHNIK's products, including any software, firmware, copyright, patent, or trademark. The sale of PETERMANN-TECHNIK products does not convey or imply any license under patent or other rights. PETERMANNTECHNIK retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or services by PETERMANN-TECHNIK. Unless otherwise agreed to in writing by PETERMANN-TECHNIK, any reproduction, modification, translation, compilation, or representation of this material shall be strictly prohibited. CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 4 OF 4 I SPEC 01 I REV.00 I APRIL 2015