Document 110-1 5 mm Tunable Inductor — 164, 165 Series Coilcraft tunable inductors provide the compactness of a 5 mm coil and the low drift reliability of an insert molded coil. Standard inductance values range from 9 nH to over 280 nH. The windings of these economical coils are precision molded into a single piece of polypropylene/nylon/PET for mechanical and electrical stability. Optional plated brass shield cans with solderable tabs provide integral shielding and additional mounting stability. These parts can be odered without cores for use as fixed inductors. Coilcraft’s Designer’s Kit M105 contains samples of all standard values. To order, please contact Coilcraft or purchase on-line at http://order.coilcraft.com. Unshielded Styles 0.310 ±0.020 7,87 ±0,51 0.139 ±0.005 3,53 ±0,13 0.130 ±0.040 3,30 ±1,02 0.139 ±0.005 3,53 ±0,13 Start Finish 0.018 dia 0,46 0.205 ±0.005 square 5,21 ±0,13 Shielded Styles 0.120 dia hole 3,05 0.340 max 8,64 Recommended Board Layout 0.212 Tab centers 5,38 0.120 ±0.010 3,05 ±0,25 Tab length Start 0.031 ±0.010 0,79 ±0,25 CL 0.0695 1,765 Finish 0.038 (2) 0,965 0.230 square max 5,84 Specifications subject to change without notice. Please check our website for latest information. Document 110-1 © Coilcraft, Inc. 2005 0.0695 1,765 0.051 (for shield 1,30 can tabs) 0.106 2,69 CL Revised 08/15/05 Document 110-2 IN 1 TRITUNER 3 TOOLS SEE INDEX TUNING WRENCH 5 mm Tunable Inductor — Unshielded Part number1 No core at L max3 at L min4 2 5 2 5 L (nH) Q min L (nH) Q min L (nH)2 Q min5 Color Turns 164-01A06 164-02A06 164-03A06 164-04A06 164-05A06 164-06A06 164-07A06 164-08A06 164-09A06 164-10A06 164-11A06 Brown Red Orange Yellow Green Blue Violet Gray White Black Brown 11/2 21/2 31/2 41/2 51/2 61/2 71/2 81/2 91/2 101/2 111/2 19 34 55 77 101 128 156 183 216 248 281 145 138 130 119 108 107 106 100 100 92 92 19 34 55 77 99 126 150 178 190 223 246 145 138 130 119 86 75 68 62 62 55 55 16 26 38 52 65 83 97 112 131 148 170 165-00A06 165-01A06 165-02A06 165-03A06 165-04A06 165-05A06 165-06A06 165-07A06 Black Brown Red Orange Yellow Green Blue Violet 1/2 11/2 21/2 31/2 41/2 51/2 61/2 71/2 9 18 32 48 64 83 103 122 147 145 143 138 133 125 120 115 9 18 32 45 60 78 90 105 147 145 143 135 114 110 94 92 9 15 25 33 43 54 68 79 No core SRF min (MHz) Irms6 (A) 112 96 79 72 64 60 57 53 53 51 51 150 150 150 150 150 100 100 100 100 100 100 2000 1260 960 850 770 730 640 570 540 490 360 7.2 5.1 4.4 3.7 3.6 3.3 3.1 2.9 2.7 2.5 2.3 131 112 92 84 76 73 70 69 150 150 150 150 150 150 150 150 6000 2850 1860 1410 1130 820 800 770 8.1 6.5 4.9 4.2 3.8 3.6 3.4 3.1 Typical Q vs Frequency 164 Series No Core 164 Series Al Core 180 180 160 160 140 140 01 120 100 11 120 03 05 Q factor 1. To order fixed inductance parts without cores, eliminate the “A06”, e.g. 164-01. 2. Inductance measured on Agilent/HP 4286A Impedance Analyzer with 16092A Spring Clip Fixture. 3. L max measured with core halfway out top of form. 4. L min measured with core centered in winding. 5. Q measured on Agilent/HP 4286A with 16092A fixture, direct connect to Agilent/HP 4342A Q-Meter and Meguro MQ-171 Q-Meter with 0.5″ bus bars. 6. Average current for a 15°C rise above 25°C ambient. 7. Core: Aluminum 0.187″ (4,75 mm) long. 8. Operating temperature range –40°C to +85°C. 9. Electrical specifications 25°C. See Qualification Standards section for environmental and test data. Q factor Notes: Freq (MHz) 07 80 80 60 60 40 40 20 20 10 01 100 03 05 11 10 20 40 60 80 100 200 400 20 40 Frequency (MHz) 165 Series No Core 80 100 400 165 Series Al Core 160 160 00 140 04 120 140 02 00 120 Q factor 07 100 80 100 02 80 04 60 60 40 40 20 20 07 10 10 20 40 60 80 100 Frequency (MHz) 200 400 20 40 60 80 100 200 400 Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. Document 110-2 © Coilcraft, Inc. 2005 200 180 180 Q factor 60 Frequency (MHz) Revised 01/03/05 Document 110-3 IN 1 TRITUNER 3 TOOLS SEE INDEX TUNING WRENCH 5 mm Tunable Inductor — Shielded No core at L max3 at L min4 2 5 2 5 L (nH) Q min L (nH) Q min L (nH)2 Q min5 Part number1 Color Turns 164-01A06S 164-02A06S 164-03A06S 164-04A06S 164-05A06S 164-06A06S 164-07A06S 164-08A06S 164-09A06S 164-10A06S 164-11A06S Brown Red Orange Yellow Green Blue Violet Gray White Black Brown 11/2 21/2 31/2 41/2 51/2 61/2 71/2 81/2 91/2 101/2 111/2 16 27 41 56 71 88 105 122 141 160 179 124 108 92 86 80 79 75 74 71 69 69 16 27 41 56 71 80 101 117 134 150 164 124 108 92 84 79 77 70 64 62 60 60 14 22 32 43 53 65 76 87 100 113 127 165-00A06S 165-01A06S 165-02A06S 165-03A06S 165-04A06S 165-05A06S 165-06A06S 165-07A06S Black Brown Red Orange Yellow Green Blue Violet 1/2 11/2 21/2 31/2 41/2 51/2 61/2 71/2 9 16 25 35 46 57 68 80 138 124 110 104 97 92 86 85 9 16 25 33 41 50 59 70 138 124 110 102 90 82 75 74 9 14 21 28 35 43 52 60 No core SRF min (MHz) Irms6 (A) 106 89 72 66 60 59 54 54 53 51 51 150 150 150 150 150 150 100 100 100 100 100 2100 1300 1100 940 980 800 750 580 550 490 400 7.2 5.1 4.4 3.7 3.6 3.3 3.1 2.9 2.7 2.5 2.3 121 104 87 78 69 67 65 64 150 150 150 150 150 150 150 150 6000 2570 1670 1230 1150 820 800 770 8.1 6.5 4.9 4.2 3.8 3.6 3.4 3.1 Typical Q vs Frequency 164 Series No Core 164 Series Al Core 180 180 160 160 140 140 120 120 01 Q factor 1. To order fixed inductance parts without cores, eliminate the “A06”, e.g. 164-01S. 2. Inductance measured on Agilent/HP 4286A Impedance Analyzer with 16092A Spring Clip Fixture. 3. L max measured with core halfway out top of form. 4. L min measured with core centered in winding. 5. Q measured on Agilent/HP 4286A with 16092A fixture, direct connect to Agilent/HP 4342A Q-Meter and Meguro MQ-171 Q-Meter with 0.5″ bus bars. 6. Average current for a 15°C rise above 25°C ambient. 7. Core: Aluminum 0.187″ (4,75 mm) long. 8. Operating temperature range –40°C to +85°C. 9. Electrical specifications 25°C. See Qualification Standards section for environmental and test data. Q factor Notes: Freq (MHz) 100 03 80 05 60 11 01 100 80 03 60 40 40 20 20 10 05 11 10 20 40 60 80 100 200 400 20 40 Frequency (MHz) 165 Series No Core 80 100 400 165 Series Al Core 160 160 00 140 140 120 120 100 Q factor 02 04 07 80 00 100 02 80 60 60 40 40 20 20 04 07 10 10 20 40 60 80 100 Frequency (MHz) 200 400 20 40 60 80 100 200 400 Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. Document 110-3 © Coilcraft, Inc. 2005 200 180 180 Q factor 60 Frequency (MHz) Revised 01/03/05