Datasheet

UNISONIC TECHNOLOGIES CO., LTD
TIP102
NPN SILICON TRANSISTOR
NPN EPITAXIAL TRANSISTOR
„
DESCRIPTION
The UTC TIP102 is designed for using in general purpose
amplifier and switching applications.
„
FEATURES
* Low VCE(SAT)
* High Current Gain
* Complementary to TIP107
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
TIP102L-TA3-T
TIP102G-TA3-T
TIP102L-TN3-R
TIP102G-TN3-R
www.unisonic.com.tw
Copyright © 2012 Unisonic Technologies Co., Ltd
Package
TO-220
TO-252
Pin Assignment
1
2
3
B
C
E
B
C
E
Packing
Tube
Tape Reel
1 of 4
QW-R209-025.B
TIP102
„
NPN SILICON TRANSISTOR
ABSOLUTE MAXIMUM RATING (TC=25°C)
PARAMETER
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Collector Current
Base Current
SYMBOL
VCBO
VCEO
VEBO
DC
Pulse
IC
ICP
IB
UNIT
V
V
V
A
A
A
1
80
Collector Power Dissipation
PC
W
41
Junction Temperature
TJ
150
°C
Storage Temperature
TSTG
-65~+150
°C
Note Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
DC
TO-220
TO-252
RATINGS
100
100
5
8
15
ELECTRICAL CHARACTERISTICS (TC=25°C, unless otherwise specified)
PARAMETER
Collector-Emitter Sustaining Voltage
Collector-Base Cut-Off Current
Collector-Emitter Cut-Off Current
Emitter-Base Cut-Off Current
ON CHARACTERISTICS
DC Current Gain
SYMBOL
VCEO(SUS)
ICBO
ICEO
IEBO
hFE1
hFE2
Collector-Emitter Saturation Voltage
VCE(SAT)
Base-Emitter ON Voltage
SMALL-SIGNAL CHARACTERISTICS
Output Capacitance
VBE(ON)
COB
TEST CONDITIONS
IC=30mA, IB=0A
VCB=100V, IE=0A
VCE=50V, IB=0A
VEB=5V, IC=0A
MIN
100
VCE=4V, IC=3A
VCE=4V, IC=8A
IC=3A, IB=6mA
IC=8A, IB=80mA
VCE=4V, IC=8A
1000
200
VCB=10V, IE=0A, f=0.1MHZ
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TYP
MAX UNIT
V
µA
50
µA
50
mA
2
20000
2
2.5
2.8
V
V
V
300
pF
2 of 4
QW-R209-025.B
TIP102
NPN SILICON TRANSISTOR
TYPICAL CHARACTERISTICS
0µ
10
s
C
D
Collecter Current, IC (mA)
„
s
5m
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 4
QW-R209-025.B
TIP102
NPN SILICON TRANSISTOR
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R209-025.B