UNISONIC TECHNOLOGIES CO., LTD MMDT2227 DUAL TRANSISTOR NPN & PNP GENERAL PURPOSE AMPLIFIER DESCRIPTION The UTC MMDT2227 is an NPN & PNP general purpose amplifier. it’s suitable for a medium power amplifier and switch requiring collector currents up to 600mA. FEATURES * Low VCE(SAT), VCE(SAT) = 0.3V (typ.)@IC / IB = 150mA / 15mA VCE(SAT) < -0.4V (typ.) @IC/IB = -150mA / -15mA * NPN MMBT2222A PNP MMBT2907A * High collector current gain under high collector current condition EQUIVALENT CIRCUIT ORDERING INFORMATION Ordering Number Package MMDT2227G-AL6-R SOT-363 MMDT2227G-AL6-R 1 E1 Pin Assignment 2 3 4 5 B1 C2 E2 B2 (1)Packing Type (1) R: Tape Reel (2)Package Type (2) AL6: SOT-363 (3)Green Package (3) G: Halogen Free and Lead Free 6 C1 Packing Tape Reel MARKING 6 5 4 D27G 1 2 3 www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 5 QW-R218-019.D MMDT2227 DUAL TRANSISTOR ABSOLUTE MAXIMUM RATINGS* (TA=25°C , unless otherwise specified)(Note 2) PARAMETER SYMBOL RATINGS UNIT 40 Collector-Emitter Voltage VCEO V -60 75 Collector-Base Voltage VCBO V -60 6 Emitter-Base Voltage VEBO V -5.0 600 Collector Current - Continuous IC mA -600 Derate above 25°C PD 200 mW Junction Temperature TJ +150 °C Storage Temperature TSTG -55 ~ +150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. TR1 TR2 TR1 TR2 TR1 TR2 TR1 TR2 THERMAL DATA PARAMETER Junction to Case SYMBOL θJC RATINGS 415 UNIT °С/W ELECTRICAL CHARACTERISTICS (TA =25°C unless otherwise specified) TR1 PARAMETER OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current ON CHARACTERISTICS DC Current Gain SYMBOL V(BR)CEO V(BR)CBO V(BR)EBO ICBO IEBO hFE Collector-Emitter Saturation Voltage (Note) VCE(SAT) Base-Emitter Saturation Voltage (Note) VBE(SAT) SMALL SIGNAL CHARACTERISTICS Current Gain - Bandwidth Product Output Capacitance Input Capacitance fT COB CIB TEST CONDITIONS MIN TYP MAX UNIT IC=10mA, IB=0 (Note) IC=10 µA, IE=0 IE=10µA, IC=0 VCB= 60V, IE=0 VEB=3.0V, IC=0 40 75 6 IC=0.1mA, VCE=10V IC=1mA, VCE=10V IC=10mA, VCE=10V IC=150mA, VCE=10V IC=150mA, VCE= 1V (Note) IC=500mA, VCE=10V IC=150mA, IB=15mA IC=500mA, IB=50mA IC=150mA, IB=15mA IC=500mA, IB=50mA 35 50 75 100 50 40 10 10 0.6 IC= 20mA, VCE=20V, f =100MHz 300 VCB=10 V, IE=0, f=100 kHz VEB=0.5V, IC=0, f=100 kHz IC=100µA, VCE=10V, Noise Figure NF RS=1.0kΩ, f =1.0kHz Note: Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2.0% UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw V V V nA nA 300 0.3 1.0 1.2 2.0 V V V V 8 25 MHz pF pF 4 dB 2 of 5 QW-R218-019.D MMDT2227 DUAL TRANSISTOR ELECTRICAL CHARACTERISTICS(Cont.) TR2 PARAMETER OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current ON CHARACTERISTICS DC Current Gain SYMBOL V(BR)CEO V(BR)CBO V(BR)EBO ICBO IEBO hFE Collector-Emitter Saturation Voltage (Note) VCE(SAT) Base-Emitter Saturation Voltage (Note) VBE(SAT) SMALL SIGNAL CHARACTERISTICS Current Gain - Bandwidth Product Output Capacitance Input Capacitance fT COB CIB TEST CONDITIONS MIN TYP MAX UNIT IC=-10mA, IB=0 (Note) IC=-10 µA, IE=0 IE=-10µA, IC=0 VCB= -50V, IE=0 VEB=-3.0V, IC=0 -60 -60 -5.0 IC=-0.1mA, VCE=-10V IC=-1.0mA, VCE=-10V IC=-10mA, VCE=-10V IC=-150mA, VCE= -10V (Note) IC=-500mA, VCE=-10V (Note) IC=-150mA, IB=-15mA IC=-500mA, IB=-50mA IC=-150mA, IB=-15mA IC=-500mA, IB=-50mA 75 100 100 100 50 -20 -30 IC= -50mA,VCE=-20V,f =100MHz 200 VCB=-10V, IE=0, f=100 kHz VEB=-2.0V, IC=0, f=100 kHz IC=-100µA, VCE=-10V, Noise Figure NF RS=-1.0kΩ, f =1.0kHz Note: Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2.0% UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw V V V nA nA 300 2.0 -0.4 -1.6 -1.3 -2.6 V V V V 8 30 MHz pF pF dB 3 of 5 QW-R218-019.D MMDT2227 DUAL TRANSISTOR TYPICAL CHARACTERISTICS Emitter Current, IE (µA) Collector Current, IC (A) Collector Current, IC (µA) Collector Current, IC (mA) MMDT2227 TR1 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R218-019.D MMDT2227 DUAL TRANSISTOR TYPICAL CHARACTERISTICS(Cont.) MMDT2227 TR2 Collector Current vs. Collector-Base Voltage 12 Collector Current vs. Collector-Emitter Voltage 14 12 10 10 8 8 6 6 4 4 2 0 2 Emitter Current vs. Emitter-Base Voltage 14 10 8 6 4 Collector Current vs. Collector-Emitter Voltage 0.5 0.4 IB=1.49mA 0.3 0.2 IB=0.70mA 0.1 2 0 0 20 40 60 80 100 120 140 160 Collector-Emitter Voltage, -VCEO (V) 0.6 Collector Current, -IC (A) 12 Emitter Current, -IE (µA) 0 0 20 40 60 80 100 120 140160 180 Collector-Base Voltage, -VCBO (V) IB=0.05mA 0 6 2 4 8 10 12 14 Emitter-Base Voltage, -VEBO (V) 0 0 IB=0.004mA 2 4 6 8 10 12 14 16 Collector-Emitter Voltage, -VCE (V) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R218-019.D