UTC-IC MMDT2227

UNISONIC TECHNOLOGIES CO., LTD
MMDT2227
Preliminary
DUAL TRANSISTOR
NPN & PNP GENERAL
PURPOSE AMPLIFIER
„
DESCRIPTION
The UTC MMDT2227 is an NPN & PNP general purpose amplifier.
it’s suitable for a medium power amplifier and switch requiring
collector currents up to 500mA.
„
FEATURES
* Low VCE(SAT), VCE(SAT)=0.4V (typ.)@IC /IB=150mA/15mA,
VCE(SAT)=1.4V (typ.) @IC/IB = 300mA/30mA
* High collector current gain under high collector current condition
„
EQUIVALENT CIRCUIT
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MMDT2227L-AL6-R
MMDT2227G-AL6-R
„
Package
SOT-363
1
E1
Pin Assignment
2
3
4
5
B1 C2 E2 B2
6
C1
Packing
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
1 of 3
QW-R218-019.a
MMDT2227
„
Preliminary
DUAL TRANSISTOR
ABSOLUTE MAXIMUM RATINGS* (TA=25°C , unless otherwise specified)(Note 2)
PARAMETER
SYMBOL
RATINGS
TR1
30
60
5.0
500
UNIT
TR2
-30
-60
-5.0
-500
Collector-Emitter Voltage
VCEO
V
Collector-Base Voltage
VCBO
V
Emitter-Base Voltage
VEBO
V
Collector Current - Continuous
IC
mA
Total Device Dissipation
300
mW
PD
Derate above 25°C
2.4
mW/°C
Junction Temperature
TJ
+150
°C
Storage Temperature
TSTG
-55 ~ +150
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
1. Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. These ratings are limiting values above which the serviceability of any semiconductor device may be
impaired.
„
THERMAL DATA
PARAMETER
Junction to Case
„
SYMBOL
θJC
RATINGS
415
UNIT
°С/W
ELECTRICAL CHARACTERISTICS (TA =25°C unless otherwise specified)
TR1
PARAMETER
OFF CHARACTERISTICS
Collector-Emitter Breakdown Voltage
Collector-Base Breakdown Voltage
Emitter-Base Breakdown Voltage
Collector Cutoff Current
Emitter Cutoff Current
ON CHARACTERISTICS
DC Current Gain
SYMBOL
V(BR)CEO
V(BR)CBO
V(BR)EBO
ICBO
IEBO
hFE
Collector-Emitter Saturation Voltage (Note)
VCE(SAT)
Base-Emitter Saturation Voltage (Note)
SMALL SIGNAL CHARACTERISTICS
Current Gain - Bandwidth Product
Output Capacitance
Input Capacitance
VBE(SAT)
fT
COBO
CIBO
TEST CONDITIONS
IC=10mA, IB=0 (Note)
IC=10 µA, IE=0
IE=10µA, IC=0
VCB= 50V, IE=0
VEB=3.0V, IC=0
30
60
5.0
IC=1.0mA, VCE=10V
IC=10mA, VCE=10V
IC=150mA, VCE= 1 V (Note)
IC=300mA, VCE=10V (Note)
IC=150mA, IB=15mA
IC=300mA, IB=30mA
IC=150mA, IB=15mA
50
75
100
30
IC= 50mA, VCE=20V, f =100MHz
VCB=10 V, IE=0, f=100 kHz
VEB=2.0V, IC=0, f=100 kHz
IC=100µA, VCE=10V,
Noise Figure
NF
RS=1.0kΩ, f =1.0kHz
Note: Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2.0%
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN TYP MAX UNIT
30
30
V
V
V
nA
nA
0.4
1.4
1.3
V
V
V
250
4.0
12
MHz
pF
pF
2.0
dB
2 of 3
QW-R218-019.a
MMDT2227
Preliminary
DUAL TRANSISTOR
ELECTRICAL CHARACTERISTICS (TA =25°C unless otherwise specified)
„
TR2
PARAMETER
OFF CHARACTERISTICS
Collector-Emitter Breakdown Voltage
Collector-Base Breakdown Voltage
Emitter-Base Breakdown Voltage
Collector Cutoff Current
Emitter Cutoff Current
ON CHARACTERISTICS
DC Current Gain
SYMBOL
V(BR)CEO
V(BR)CBO
V(BR)EBO
ICBO
IEBO
hFE
Collector-Emitter Saturation Voltage (Note)
VCE(SAT)
Base-Emitter Saturation Voltage (Note)
SMALL SIGNAL CHARACTERISTICS
Current Gain - Bandwidth Product
Output Capacitance
Input Capacitance
VBE(SAT)
fT
COBO
CIBO
TEST CONDITIONS
MIN TYP MAX UNIT
IC=-10mA, IB=0 (Note)
IC=-10 µA, IE=0
IE=-10µA, IC=0
VCB= -50V, IE=0
VEB=-3.0V, IC=0
-30
-60
-5.0
IC=-1.0mA, VCE=-10V
IC=-10mA, VCE=-10V
IC=-150mA, VCE= -1V (Note)
IC=-300mA, VCE=-10V (Note)
IC=-150mA, IB=-15mA
IC=-300mA, IB=-30mA
IC=-150mA, IB=-15mA
-50
-75
-100
-30
IC= -50mA,VCE=-20V,f =100MHz
VCB=-10V, IE=0, f=100 kHz
VEB=-2.0V, IC=0, f=100 kHz
IC=-100µA, VCE=-10V,
Noise Figure
NF
RS=-1.0kΩ, f =1.0kHz
Note: Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2.0%
-30
-30
V
V
V
nA
nA
-0.4
-1.4
-1.3
V
V
V
250
4.0
12
MHz
pF
pF
2.0
dB
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R218-019.a