Power Modules MOSFET-based Power Module with Split Output, Engineered to Maximize Efficiency for 3-level Inverters Vincotech is pleased to announce the release of new power modules flowNPC 1 MOS Dimension: 38 x 82 x 12 mm designed for highest-efficiency solar inverter applications. Features: 3-Level inverter topology designed for 1200 V applications 600 V MOSFET and 600 V SiC diodes for highest efficiency and switching frequency Split output eliminates cross conduction and enables reactive power capability Highlights 3-level inverter topology 600 V MOSFET and SiC diodes Compact design Low inductive, 12 mm housing Kelvin emitter for high switching performance Temperature sensor 2-clip 12 mm flow 1 housing with Press-fit pins Part no.: 10-PY06NRA041FS-M413FY 10-PY06NRA021FS-M410FY Voltage 600 V 600 V R_DS_on Comment 41 mΩ 21 mΩ Available Coming soon Press-fit pin Benefits: Vincotech GmbH Biberger Straße 93 82008 Unterhaching Germany Efficiency exceeding 98.5% @ 50 kHz 600 V components for 1200 V applications Enhanced cross conduction immunity www.vincotech.com Status: Oct-12 Power Modules The modules are also available with pre-applied thermal interface material, a highly conductive, 3.4 W/K substance that simplifies assembly and further improves thermal impedance. Samples and prices are available on request. The products will be supported by Vincotech’s flowSOL simulator, which enables detailed loss calculations. Datasheets (10-PY06NRA041FS-M413FY only) can be found on the Vincotech website at: http://www.vincotech.com/products/bytopologies.html?rpm_id=19#a43 If you wish to learn more about Vincotech's range of power modules, please visit www.vincotech.com/Power_Modules Vincotech GmbH Biberger Straße 93 82008 Unterhaching Germany www.vincotech.com Status: Oct-12