DG2018, DG2019 Vishay Siliconix Low Voltage, Dual DPDT and Quad SPDT Analog Switches DESCRIPTION FEATURES The DG2018 and DG2019 are low voltage, single supply analog switches. The DG2018 is a dual double-pole/doublethrow (DPDT) with two control inputs that each controls a pair of single-pole/double-throw (SPDT). The DG2019 uses one control pin to operate four independent SPDT switches. • Low voltage operation (1.8 V to 5.5 V) • Low on resistance - RDS(on): 6 Ω at 2.7 V • Low voltage logic compatible - DG2019: VINH = 1 V • High bandwidth: 180 MHz When operated on a + 3 V supply, the DG2018’s control pins are compatible with 1.8 V digital logic. The DG2019 has an available feature of a VL pin that allows a 1.0 V threshold for the control pin when VL is powered with 1.5 V. Built on Vishay Siliconix’s low voltage submicron CMOS process, the DG2018 and DG2019 are ideal for high performance switching of analog signals; providing low onresistance (6 Ω at + 2.7 V), fast speed (Ton, Toff at 42 ns and 16 ns), and a bandwidth that exceeds 180 MHz. The DG2018 and DG2019 were designed to offer solutions that extend beyond audio/video functions, to providing the performance required for today’s demanding mixed-signal switching in portable applications. An epitaxial layer prevents latch-up. Brake-before-make is guaranteed for all SPDT’s. All switches conduct equally well in both directions when on, and blocks up to the power supply level when off. • QFN-16 package BENEFITS • • • • • • Ideal for both analog and digital signal switching Reduced power consumption High accuracy Reduced PCB space Fast switching Low leakage APPLICATIONS • • • • • Cellular phones Audio and video signal routing PCMCIA cards Battery operated systems Portable instrumentation FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG2018DN QFN-16 (3 X 3) COM1 NO1 16 15 TRUTH TABLE V+ NC4 14 13 IN1, IN2 NC1 1 12 COM4 IN1, IN2 2 11 NO4 NO2 3 10 IN3, IN4 COM2 4 9 NC3 5 6 NC2 GND 7 8 Logic NC1 and NC2 NO1 and NO2 0 ON OFF 1 OFF ON Logic NC3 and NC4 NO3 and NO4 0 ON OFF 1 OFF ON IN3, IN4 ORDERING INFORMATION Temp. Range - 40 °C to 85 °C Package QFN-16 (3 x 3 mm) Part Number DG2018DN NO3 COM3 Top View Document Number: 72342 S-82626-Rev. C, 03-Nov-08 www.vishay.com 1 DG2018, DG2019 Vishay Siliconix FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG2019DN QFN-16 (3 X 3) COM1 NO1 16 15 V+ NC4 14 13 TRUTH TABLE NC1 1 12 COM4 IN 2 11 NO4 NO2 3 10 VL COM2 4 9 5 6 NC2 GND 7 Logic NC1, 2, 3 and 4 NO1, 2, 3 and 4 0 ON OFF 1 OFF ON ORDERING INFORMATION Temp. Range - 40 °C to 85 °C Package QFN-16 (3 x 3 mm) Part Number DG2019DN NC3 8 NO3 COM3 Top View ABSOLUTE MAXIMUM RATINGS Parameter Reference V+ to GND IN, COM, NC, NO Limit Unit - 0.3 to + 6 - 0.3 to (V+ + 0.3) V Continuous Current (Any terminal) ± 50 Peak Current (Pulsed at 1 ms, 10 % Duty Cycle) ± 100 Storage Temperature (D Suffix) Power Dissipation (Packages)b QFN-16 (3 x 3 mm)c mA - 65 to 150 °C 850 mW Notes: a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 4.0 mW/°C above 70 °C. www.vishay.com 2 Document Number: 72342 S-82626-Rev. C, 03-Nov-08 DG2018, DG2019 Vishay Siliconix SPECIFICATIONS V+ = 3 V Test Conditions Otherwise Unless Specified V+ = 3 V, ± 10 %, (DG2018 Only) VIN = 0.5 or 1.4 Ve Parameter Symbol (DG2019 Only) VL = 1.5 V, VIN = 0.4 or 1.0 Ve Limits - 40 °C to 85 °C Temp.a Min.b Full 0 Typ.c Max.b Unit V+ V Analog Switch VNO, VNC, VCOM Analog Signal Ranged RON On-Resistance RON Flatness RON Flatness RON Match Between Channels ΔRON Switch Off Leakage Current INO(off) INC(off) ICOM(off) Channel-On Leakage Current ICOM(on) V+ = 2.7 V, VCOM = 0.2 V/1.5 V INO, INC = 10 mA V+ = 2.7 V VCOM = 0 to V+, INO, INC = 10 mA Room Full 6 12 15 Room 0.5 2 Room 0.6 3 Room Full -1 - 10 0.3 1 10 Room Full -1 - 10 0.3 1 10 Room Full -1 10 0.3 1 10 DG2018 Full 1.4 DG2019 Full 1.0 DG2018 Full 0.5 DG2019 Full 0.4 V+ = 3.3 V, VNO, VNC = 0.3 V/3 V VCOM = 3 V/0.3 V V+ = 3.3 V, VNO, VNC = VCOM = 0.3 V/3 V Ω nA Digital Control VINH Input High Voltage VINL Input Low Voltage Input Capacitance Input Current VL = 1.5 V VL = 1.5 V Cin f = 1 MHz Full IINL or IINH VIN = 0 or V+ Full 9 -1 V pF 1 µA Dynamic Characteristics Turn-On Time tON Turn-Off Time tOFF Break-Before-Make Time Charge Injection d 16 25 35 Full CL = 1 nF, VGEN = 0 V, RGEN = 0 Ω Room - 1.46 Room - 67 Room - 72 Room 180 XTALK RL = 50 Ω, CL = 5 pF, f = 1 MHz BW Channel-On Capacitance Room Full VNO or VNC = 2.0 V, RL = 50 Ω, CL = 35 pF Crosstalkd d 55 65 td OIRR NO, NC Off Capacitanced 42 QINJ Off-Isolationd Bandwidthd VNO or VNC = 2.0 V, RL = 300 Ω, CL = 35 pF Room Full 1 CNO(off) Room 9 CNC(off) Room 9 Room 30 Room 30 Full 0.01 CNO(on) VIN = 0 or V+, f = 1 MHz CNC(on ns pC dB MHz pF Power Supply Power Supply Current I+ VIN = 0 or V+ 1.0 µA Notes: a. Room = 25 °C, Full = as determined by the operating suffix. b. Typical values are for design aid only, not guaranteed nor subject to production testing. c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. d. Guarantee by design, nor subjected to production test. e. VIN = input voltage to perform proper function. Document Number: 72342 S-82626-Rev. C, 03-Nov-08 www.vishay.com 3 DG2018, DG2019 Vishay Siliconix SPECIFICATIONS V+ = 5 V Test Conditions Otherwise Unless Specified V+ = 5 V, ± 10 %, (DG2018 Only) VIN = 0.8 or 1.8 Ve Parameter Symbol Limits - 40 °C to 85 °C (DG2019 Only) VL = 1.5 V, VIN = 0.4 or 1.0 Ve Temp.a Min.b Typ.c Max.b Unit V+ V Analog Switch VNO, VNC, VCOM Analog Signal Ranged RON On-Resistance RON Flatness RON Flatness RON Match Between Channels Switch Off Leakage Current f ΔRON INO(off) INC(off) ICOM(off) Channel-On Leakage Currentf ICOM(on) Full 0 V+ = 4.5 V, VCOM = 3 V, INO, INC = 10 mA Room Full 4 8 10 V+ = 4.5 V VCOM = 0 to V+, INO, INC = 10 mA Room 0.6 1.2 Room 0.6 1.2 V+ = 5.5 V VNO, VNC = 1 V/4.5 V, VCOM = 4.5 V/1 V V+ = 5.5 V, VNO, VNC = VCOM = 1 V/4.5 V Room Full -1 - 10 0.03 1 10 Room Full -1 - 10 0.03 1 10 Room Full -1 - 10 0.03 1 10 Ω nA Digital Control Input High Voltage VINH Input Low Voltage VINL Input Capacitance Cin IINL or IINH Input Current VL = 1.5 V VL = 1.5 V DG2018 Full 1.8 DG2019 Full 1.0 DG2018 Full 0.8 DG2019 Full 0.4 Full VIN = 0 or V+ Full V 9 1 pF 1 µA Dynamic Characteristics Turn-On Time tON Turn-Off Time tOFF Break-Before-Make Time Charge Injection d d 19 33 35 Full CL = 1 nF, VGEN = 0 V, RGEN = 0 Ω Room - 2.46 Room - 67 Room - 72 BW Room 180 CNO(off) Room 7.5 Room 7.5 Room 30 Room 30 OIRR Channel-On Capacitance Room Full VNO or VNC = 3 V, RL = 50 Ω, CL = 35 pF XTALK CNC(off) d 48 52 td Crosstalkd Source-Off Capacitanced 44 QINJ Off-Isolation Bandwidthd VNO or VNC = 3 V, RL = 300 Ω, CL = 35 pF Room Full CNO(on) RL = 50 Ω, CL = 5 pF, f = 1 MHz VIN = 0 or V+, f = 1 MHz CNC(on ns 1 pC dB MHz pF Power Supply Power Supply Range V+ Power Supply Current I+ 1.8 VIN = 0 or V+ Full 0.01 5.5 V 1.0 µA Notes: a. Room = 25 °C, Full = as determined by the operating suffix. b. Typical values are for design aid only, not guaranteed nor subject to production testing. c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. d. Guarantee by design, nor subjected to production test. e. VIN = input voltage to perform proper function. f. Not production tested. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.vishay.com 4 Document Number: 72342 S-82626-Rev. C, 03-Nov-08 DG2018, DG2019 Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 9 10 R ON - On-Resistance (Ω) R ON - On-Resistance (Ω) 8 V+ = 2.7 V 85 °C 25 °C 8 T = 25 °C ICOM = 10 mA V+ = 2.7 V 6 V+ = 5.5 V 4 V+ = 3.3 V 7 - 40 °C 6 5 V+ = 5.5 V 85 °C 25 °C - 40 °C 4 3 2 2 1 0 0 0 1 2 3 4 5 0 6 1 2 3 4 5 6 VCOM - Analog Voltage (V) VCOM - Analog Voltage (V) RON vs. Analog Voltage and Temperature RON vs. VCOM and Supply Voltage 10 mA 10 000 1000 I+ - Supply Current (A) I+ - Supply Current (pA) 1 mA V+ = 5.5 V VIN = 0 V 100 10 100 µA 10 µA 1 µA 100 nA 10 nA 1 - 60 0 - 40 - 20 0 20 40 60 80 0 100 2M Temperature (°C) 6M 8M 10 M Supply Current vs. Input Switching Frequency Supply Current vs. Temperature 150 10 000 125 V+ = 5 V 100 Leakage Current (pA) 1000 Leakage Current (pA) 4M Input Switching Frequency (Hz) INO(off), IINC(off) 100 ICOM(off) ICOM(on) 10 V+= 3.3 V 75 50 ICOM(off) ICOM(on) 25 0 - 25 INO(off), INC(off) - 50 - 75 - 100 - 125 1 - 60 - 40 - 20 0 20 40 60 Temperature (°C) Leakage Current vs. Temperature Document Number: 72342 S-82626-Rev. C, 03-Nov-08 80 100 - 150 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VCOM, V NO, V NC - Analog Voltage (V) Leakage vs. Analog Voltage www.vishay.com 5 DG2018, DG2019 Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 1.8 50 RL = 300 Ω 1.4 Vth - Threshold Voltage tON/toff - Switching Time (ns) DG2018 1.6 tON V+ = 3.3 V 40 tON V+ = 5.5 V 30 tOFF V+ = 3.3 V 20 1.2 1.0 OFF/ON 0.8 0.6 0.4 tOFF V+ = 5.5 V 10 ON/OFF 0.2 0 - 60 0.0 - 40 - 20 0 20 40 60 80 0 100 3 4 5 Switching Time vs. Temperature and Supply Voltage Switching Voltage vs. Supply Voltage (V+) 6 10 8 DG2019 V+ = 5.5 V 1.4 1.2 V+ = 3.3 V V+ = 5.5 V 1.0 6 Q - Charge Injection (pC) 1.6 Vth - Threshold Voltage 2 V+ - Supply Voltage (V) 1.8 0.8 4 2 0 V+ = 3.3 V -2 0.6 0.4 1.0 1 Temperature (°C) -4 -6 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 0 6.0 1 2 3 4 5 6 VL (V) VCOM - Analog Voltage (V) VIN vs. VL (Typ) Charge Injection at Source vs. Analog Voltage 10 Loss 0 Loss, OIRR, XTALK (dB) - 10 V+ = 3.0 V, 5.5 V RL = 50 Ω, C L = 5 pF - 20 - 30 - 40 OIRR - 50 - 60 XTALK - 70 - 80 - 90 - 100 - 110 100K 1M 10M 100M 1G Frequency (Hz) Insertion Loss, Off Isolation and Crosstalk vs. Frequency www.vishay.com 6 Document Number: 72342 S-82626-Rev. C, 03-Nov-08 DG2018, DG2019 Vishay Siliconix TEST CIRCUITS V+ VINH Logic Input 50 % V+ NO or NC Switch Input VINL Switch Output COM tr < 5 ns tf < 5 ns VOUT 0.9 x VOUT IN Logic Input RL 300 Ω GND Switch Output CL 35 pF 0V tOFF tON 0V Logic "1" = Switch On Logic input waveforms inverted for switches that have the opposite logic sense. CL (includes fixture and stray capacitance) VOUT = VCOM RL R L + R ON Figure 1. Switching Time V+ ΔVOUT V+ Rgen NC or NO VOUT COM VOUT + IN IN Vgen CL = 1 nF VIN = 0 - V+ On Off On GND Q = ΔVOUT x CL IN depends on switch configuration: input polarity determined by sense of switch. Figure 2. Charge Injection Logic Input V+ VNO VNC COM NO VO VINH tr < 5 ns tf < 5 ns VINL NC RL 50 Ω IN GND CL 35 pF VNC = VNO VO 90 % Switch 0V Output tD tD CL (includes fixture and stray capacitance) Figure 3. Break-Before-Make Interval Document Number: 72342 S-82626-Rev. C, 03-Nov-08 www.vishay.com 7 DG2018, DG2019 Vishay Siliconix TEST CIRCUITS V+ 10 nF V+ NC or NO 0 V, 2.4 V IN COM COM RL Analyzer GND VCOM Off Isolation = 20 log V NO/ NC Figure 4. Off-Isolation V+ 10 nF V+ COM Meter IN 0 V, 2.4 V NC or NO GND HP4192A Impedance Analyzer or Equivalent f = 1 MHz Figure 5. Channel Off/On Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?72342. www.vishay.com 8 Document Number: 72342 S-82626-Rev. C, 03-Nov-08 Package Information www.vishay.com Vishay Siliconix QFN-16 Lead (3 x 3) D2 D2/2 Terminal Tip D (3) - B- D/2 L E/2 E2/2 e E E2 C 3xe 0.25 - A- Exposed Pad (4) 4xb 0.10 M C A B (3) 0.25 C 3xe TOP VIEW BOTTOM VIEW // 0.10 C 0.08 C A (4) NX A1 SEATING PLANE - C- A3 SIDE VIEW Notes (1) All dimensions are in millimeters. (2) N is the total number of terminals. (3) Dimension b applies to metallized terminal and is measured between 0.25 and 0.30 mm from terminal tip. (4) Coplanarity applies to the exposed heat sink slug as well as the terminal. (5) The pin #1 identifier may be either a mold or marked feature, it must be located within the zone indicated. VARIATION 1 DIM. MILLIMETERS VARIATION 2 INCHES MILLIMETERS INCHES MIN. NOM MAX. MIN. NOM MAX. MIN. NOM MAX. MIN. NOM MAX. A 0.80 0.90 1.00 0.031 0.035 0.039 0.80 0.90 1.00 0.031 0.035 0.039 0.012 b 0.18 0.23 0.30 0.007 0.009 0.012 0.18 0.25 0.30 0.007 0.010 D 2.90 3.00 3.10 0.114 0.118 0.122 2.90 3.00 3.10 0.114 0.118 0.122 D2 1.00 1.15 1.25 0.039 0.045 0.049 1.50 1.70 1.80 0.059 0.067 0.071 E 2.90 3.00 3.10 0.114 0.118 0.122 2.90 3.00 3.10 0.114 0.118 0.122 E2 1.00 1.15 1.25 0.039 0.045 0.049 1.50 1.70 1.80 0.059 0.067 0.071 0.50 0.012 0.020 0.30 0.50 0.012 e L 0.50 BSC 0.30 0.40 0.020 BSC 0.50 BSC 0.016 0.40 0.020 BSC 0.016 0.020 ECN: T16-0233-Rev. D, 09-May-16 DWG: 5899 Revision: 09-May-16 1 Document Number: 72208 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000