KPA-3010 rot

3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED
LAMP
KPA-3010EC
Features
HIGH EFFICIENCY RED
Description
3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm
The High Efficiency Red source color devices are made with
THICKNESS.
Gallium Arsenide Phosphide on Gallium Phosphide Orange
LOW POWER CONSUMPTION.
Light Emitting Diode.
WIDE VIEWING ANGLE.
IDEAL FOR BACK LIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAA4062
REV NO: V.11
DATE: SEP/14/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
PAGE: 1 OF 4
Selection Guide
Part No.
Dice
KPA-3010EC
Iv (mcd)
@ 20 mA
Lens Type
HIGH EFFICIENCY RED (GaAsP/GaP)
Viewing
Angle
Min.
Typ.
2θ
θ1/2
4
15
120°
WATER CLEAR
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
High Efficiency Red
λD
Dominant Wavelength
∆λ1/2
Max.
Units
Test Conditions
627
nm
IF=20mA
High Efficiency Red
625
nm
IF=20mA
Spectral Line Half-width
High Efficiency Red
45
nm
IF=20mA
C
Capacitance
High Efficiency Red
15
pF
VF=0V;f=1MHz
VF
Forward Voltage
High Efficiency Red
2.0
2.5
V
IF=20mA
IR
Reverse Current
High Efficiency Red
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Units
Power dissipation
105
mW
DC Forward Current
30
mA
Peak Forward Current [1]
160
mA
5
V
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAA4062
REV NO: V.11
DATE: SEP/14/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
PAGE: 2 OF 4
High Efficiency Red
KPA-3010EC
SPEC NO: DSAA4062
REV NO: V.11
DATE: SEP/14/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
PAGE: 3 OF 4
KPA-3010EC
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAA4062
REV NO: V.11
DATE: SEP/14/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
PAGE: 4 OF 4