Low-Power Analog Solutions Analog Solutions for Automotive Applications Design Guide This design guide includes analog solutions for Motor Control, Power Supply, LED, Signal Chain and Sensor Applications www.microchip.com/automotive LOW-POWER ANALOG SOLUTIONS FOR AUTOMOTIVE APPLICATIONS Analog Competency Analog and Interface Product Attributes The demand for automobile electronics has never been greater. Do you need lower quiescent currents? Does your design require reduced board space? Designers of electronic control modules within the automobile are being challenged to deliver increased performance in a variety of systems including: powertrain, chassis, comfort, driver information, entertainment and safety. Microchip’s broad portfolio of low-power analog products enable the development of cost-effective solutions that address these challenges and others facing the system designer. Being one of the first companies to apply Non-Volatile Memory (NVM) technology to the development process for analog products, Microchip has utilized its NVM experience to deliver innovative analog solutions with unchallenged electrical characteristics. Leveraging experience from the integration of analog features on PIC®microcontrollers, nanoWatt technology and low pin count packages, Microchip’s analog circuitry consists of more than 400 different power management, linear, mixed signal, thermal management and interface products. As an innovative, market leading supplier of lowpower solutions, Microchip Technology continues to expand its analog product portfolio to support the demanding needs of the automotive designer. Low Power/Low Voltage Op Amp family with the lowest power for a given gain bandwidth 600 nA/1.4V/10 kHz bandwidth Op Amps 1.5V and 1.8V charge pumps and comparators Lowest power 12-bit ADC in a SOT-23 package Integration One of the first to market integrated LDOs with Reset, fan controllers with temperature sensors and switcher regulators with LDOs and power good PGA integrates MUX, resistive ladder, gain switches, high-performance amplifier, SPI interface Space Savings Resets, comparators, op amps, temperature sensors and LDOs in a SC-70 package, ADCs in a 5-lead SOT-23 package Accuracy Offset trimmed after packaging using Non-Volatile Memory Analog Competency – From Analog MCUs to Analog and Interface Products THERMAL MANAGEMENT (45) POWER MANAGEMENT (197) MIXED SIGNAL (70) INTERFACE (18) Temperature Sensors (26) Linear Regulators (53) SAR/Del-Sig A/D Converters (21) CAN Peripherals (7) Brushless DC Fan Speed Controllers Fan Fault Detectors (19) Switching Regulators/ Controllers (15) Dual Slope A/D Converters (9) Infrared Peripherals (5) PWM Controllers (2) Display A/D Converters (17) LIN Transceivers (1) Charge Pump DC/DC Converters (24) System D/A Converters (6) Serial Peripherals (5) Single-Supply CMOS Op Amps (56) Voltage References (2) V/F and F/V Converters (3) Comparators (13) CPU/System Supervisors (33) Digital Potentiometers (14) Linear Integrated Devices (2) Voltage Detectors (6) Programmable Gain Amplifiers (7) Power MOSFET Drivers (45) LINEAR (78) Battery Mgt (17) 2 Automotive Applications Design Guide Focused product families enabling efficient solutions for our automotive customers. LOW-POWER ANALOG SOLUTIONS FOR AUTOMOTIVE APPLICATIONS Microchip Analog Solutions Cover a Broad Range of Products and Applications in Automotive Systems Driver Information/ Mobile Multimedia Comfort/Convenience Safety/Security ABS Controller Airbag Crash Sensor Controller Airbag Host Controller LED Lighting Lighting Controller Parking Assist Controls Steering Angle Sensor Controller Tire Pressure Monitoring Air Flow Controls Battery Monitoring Controls Compass Directional Controller Door Locks/Mirror Controller Passive Keyless Entry Remote Keyless Entry/Immobilizer Seat Positioning Controller Window Lift Controller Wiper Controller 2002-2005 Analog Products FIT Rate Dynamic Life Test @ +150°C Failure Rate: +55C, 60% Confidence Level, Assuming 0.7 eV FIT Rate 8 Adaptive Cruise Controls Electric Parking Brake Controls Electronic Power Steering Controls Electronic Stability Controls Engine Control Module Co-Processor Fuel Pump Controls Gearbox Controls Glow Plug Controls Quality to Serve the Automotive Market Our manufacturing meets the demanding quality and logistics requirements imposed by the automotive market environment. In 2003, Microchip became one of the first semiconductor manufacturers to achieve ISO/TS-16949 certification. Microchip Technology Automotive Certification History 6 4 New Process Failure Rate in FITs 10 Powertrain CD Changer Controls GPS Receiver Controls Heads-Up Display Controls MP3 Player Controls Radio Controls Rear Seat Entertainment Controls Steering Wheel Controls 2 0 2002 2003 2004 2005 Calendar Year Stress Test Qualification Microchip has experience with the automotive industry’s quality requirements. Our automotive customers may request incremental device qualification testing such as the AEC-Q100, shown below. Tempe, AZ – Fab ISO 9001 Registered (1996) ISO/TS 16949 Registration (2003) Recertification (2006) Gresham, OR – Fab ISO/TS 16949 Registration (2004) Recertification (2006) Bangkok, Thailand – Assembly & Test ISO 9002 Registered (1997) ISO/TS 16949 Registration (2003) Recertification (2006) ISO 14001 (2004) AEC-Q100 Device Qualification Plan* Test Name Conditions ELFR 150ºC for 24 hours; Electrical test pre- and post-stress at +25ºC and +125ºC. HTOL/DLT 150ºC for 408 hours; Electrical test pre- and post-stress at -40, +25 and +125ºC. Readouts at 0, 96 and 408 hours. EDR Endurance Cycling Specified erase/write cycles at +85ºC; Electrical test pre- and post-stress at +25ºC and 125ºC. EDR High-Temp Bake/ Retention Bake 175ºC for 504 hours; Electrical test pre- and post-stress at +25ºC and +125ºC. Readouts at 0, 96 and 504 hours. EDR HTOL/DLT 150ºC for 408 hours; Electrical test pre- and post-stress at -40, +25, and +125ºC. Readouts at 0, 96 and 408 hours. ESD - HBM Electrical test pre- and post-stress at +25ºC and +125ºC. Test at each voltage: 500V, 1 KV, 2 KV, 4 KV. ESD - MM Electrical test pre- and post-stress at +25ºC and +125ºC. Test at each voltage: 100V, 200V, 300V, 400V. Latch-Up (Overvoltage) Test to ±14V and ±200 mA at +25ºC and ±14V and ±100 mA at +125ºC. Electrical test pre- and post-stress at +25ºC and +125ºC. *Additional package level qualification is performed per AEC-Q100 recommendation. Automotive Applications Design Guide 3 LOW-POWER ANALOG SOLUTIONS FOR AUTOMOTIVE APPLICATIONS Solutions for Low-Frequency Communications Applications Low-frequency communication systems provide many benefits in and around the vehicle. In sensing applications, it allows for the distribution of remote sensors while eliminating the concern for wired connection between the sensor and control module. In other applications, a transponder becomes a mobile device that can remain with the driver, or is attached to another apparatus that can be transferred to/from the vehicle when needed. Application Examples Remote Keyless Entry (RKE) Passive Keyless Entry (PKE) Tire Pressure Monitoring Systems (TPMS) Child Seat Detection Immobilizers Example of Passive Keyless Entry (PKE) Systems CAN Transceiver LIN + LDO 8/16-bit PIC® Microcontroller UHF Receiver UHF Transmitter 8/16-bit PIC® Microcontroller Low-Side Driver L/F Antenna 3D Analog Front End 8/16-bit PIC® Microcontroller Recommended Product Families for PKE Applications Family Features Device Examples 3D Analog Front End Bidirectional low-frequency communications, low-operating and standby currents, programmable antenna tuning capacitance MCP2030 CAN/LIN Products CAN transceivers and stand-alone controllers with SPI, LIN transceivers with integrated voltage regulators MCP2515, MCP2551X, MCP201 Op Amps Single, dual and quad op amps, low quiescent current (600 nA), lowest IQ for a given Gain Bandwidth Product (GBWP); offered in space-saving packages MCP6041/2/3/4, MCP6141/2/3/4 MCP601/2/3/4/6/7/8/9, MCP6021/2/3/4 Low-Side Drivers Single, dual and quad MOSFET Drivers, 0.5 to 12A peak output currents, inverting and non-inverting outputs TC4420/1/2/3/4/5/6/7/8/9/A, TC1410/1/2/3, TC4451/2, TC4467/8/9 Microcontrollers Wide range of 8/16- RISC-based microcontrollers and digital signal controllers PIC12, PIC16, PIC18, PIC24 Development Tools Part Number Product DV251001 MCP2510/2515 CAN Developer’s Kit APGRD001 Passive Keyless Entry Reference Design APGAC011 Accessory Key Fob For APGRD001 PKE Reference Design DM163007/11/15 PICDEM™ CAN-LIN 1 2 and 3 Demonstration Boards DM163005 PICDEM™ LIN Demonstration Board 4 Automotive Applications Design Guide LOW-POWER ANALOG SOLUTIONS FOR AUTOMOTIVE APPLICATIONS Application Examples Solutions for Motor Control Electro Hydraulic Power Steering Electric Power Steering Wiper Control Water Pump, Oil Pump, Fuel Pump Window Lift Sun Roof Air Flaps Interior and External Mirrors A broad product portfolio provides a complete system solution for your stepper motor, brushed DC motor, AC induction motor, variable speed brushless DC motor and switched reluctance motor applications. CAN/ LIN Bus Transceiver MOSFET Driver 8/16-bit PIC® Microcontroller 16-bit dsPIC® DSC MOSFET Microchip Solutions for Motor Control Motor Temperature Sensor LDO Feedback Comparator Recommended Product Families for Motor Control Applications Family Features Device Examples Temperature Sensors Typical accuracy: ±0.5°C, ±1.0°C; Output options: 1) logic outputs, 2) voltage outputs, 3) serial outputs: SMBus/I2C™, SPI TC6501/2/3/4, MCP9700/1/A, MCP9800/1/2/3/5, TC72/4/5/7 Comparators Single, dual and quad comparators, low-power consumption, low quiescent current, small packages TC1027, TC1037/8/9, MCP6541/2/3/4/6/7/8/9 MOSFET Drivers Single, dual and quad MOSFET Drivers, 0.5 to 12A peak output currents, inverting and non-inverting outputs TC4420/1/2/3/4/5/6/7/8/9/A, TC1410/1/2/3, TC4451/2, TC4467/8/9 Low-Dropout Regulators Low-operating current for longer battery life, very low-dropout voltage, highoutput voltage accuracy: ±0.4% (typ), overcurrent and overtemperature protection, requires only 1 μF ceramic output capacitance MCP1700/1/2 Transceivers CAN transceivers and stand-alone controllers with SPI; LIN transceivers with integrated voltage regulators MCP2515, MCP2551X, MCP201 Microcontrollers Wide range of 8/16- RISC-based microcontrollers and digital signal controllers PIC12, PIC16, PIC18, PIC24, dsPIC30, dsPIC33 Development Tools Part Number Product Free at www.microchip.com Motor Control Graphical User Interface Free at www.microchip.com FilterLab® Active Filter Design Software DM183011 PICDEM™ MC Development Board DM300020 dsPICDEM™ MC1 Motor Control Development Board AC300020 (requires DM300020) 3-phase BLDC Low Voltage Motor (24V) APGRD002 Window Lift Reference Design MCP9700DM-PCTL MCP9700 Temperature-to-Voltage Converter PICtail™ Demonstration Board MCP9800DM-DL MCP9800 Temperature Data Logger Demonstration Board MCP9800DM-PCTL MCP9800 Temperature Sensor PICtail™ Demonstration Board Automotive Applications Design Guide 5 LOW-POWER ANALOG SOLUTIONS FOR AUTOMOTIVE APPLICATIONS Solutions for Power Supply Applications Example of Infotainment Power Supply Unit The growing deployment of navigation, entertainment and communication equipment in modern cars, as well as the utilization of most advanced semiconductor technologies, has been changing the needs for voltage regulation in the car. Automotive power supplies are used for DC-DC conversion, DC voltage monitoring, pulse-width modulation and digital control. Electronic Control Units are using SEPIC and Buck Converters with multiple level output voltages and different current ratings. Multiple Output Voltages 8/16-bit PIC® Microcontroller 16-bit dsPIC® DSC DC Voltage Monitor DC Voltage Monitor Reference Voltage Application Examples LDO Car Radio Navigation System Car Communication/Entertainment Center GPS Comparator Threshold Monitor Clock Monitor Recommended Product Families for Power Supply Applications Family Features Device Examples Comparators Single, dual and quad comparators, low-power consumption, low quiescent current, small packages TC1027, TC1037/8/9, MCP6541/2/3/4 Voltage Monitors Low cost, precision system voltage supervisors; brown-out protection; wide range of output types, reset trip points and package options; watchdog input option MCP102/3, MCP121, MCP131, MCP1316/17/18/ 19/20/21/22 Pulse Width Modulator High-speed microcontroller adaptable PWM; excellent current mode controller, fast response time, provides a very tight limit to the maximum switch current over a wide range of input voltages, low quiescent current MCP1630 Low-Dropout Regulators Low-operating current for longer battery life, very low-dropout voltage, high-output voltage accuracy: ±0.4% (typ), overcurrent and overtemperature protection, requires only 1 μF ceramic output capacitance MCP1700/1/2 Switching Regulators Step-up and step-down DC-DC converters with soft start, programmable voltage/current supply, point-of-load sequencing, intelligent temperature compensation, overvoltage and overcurrent handling MCP1601, MCP1650/1/2/3, MCP1612, TC105, TC120/5/6 Microcontrollers Wide range of 8/16- RISC-based microcontrollers and digital signal controllers PIC12, PIC16, PIC18, PIC24, dsPIC30, dsPIC33 Development Tools Part Number Product MCP1601EV MCP1601 Buck Regulator Evaluation Board MCP1612EV MCP1612 Synchronous Buck Regulator Evaluation Board MCP1630DM-DDBS1 MCP1630 Automotive Input Boost Converter Demonstration Board MCP1630RD DDBK1 MCP1630 +12V Dual Output Buck Converter Reference Design MCP1650EV MCP1650 Boost Controller Evaluation Board MCP1726EV MCP1726 1A LDO Evaluation Board TC1016/17EV TC1016/17 LDO Linear Regulator Evaluation Board TC1303BDM-DDBK1 TC1303B Buck Regulator LDO Demonstration Board 6 Automotive Applications Design Guide LOW-POWER ANALOG SOLUTIONS FOR AUTOMOTIVE APPLICATIONS Solutions for LED Applications Traditional incandescent lamps are increasingly being replaced by Light Emitting Diodes (LEDs). LEDs offer compelling advantages, including a high level of light efficiency, reliability, mechanical stability and long operating lifetime. Because LEDs must be operated at constant current, DC-DC converters with the capability of efficiently translating the operating voltage into the LED forward voltage are required. Further key elements of LED control circuits are overcurrent protection, over heating protection (temperature sensing) and efficient energy utilization. Application Examples A typical LED solution can be as simple as a battery and a resistor, but with more complex dimming, flashing and multi-color applications; and more rigorous requirements in terms of matching brightness and color, there is an increasing need to control and monitor the current in an LED application. Multiple White LED Solutions Switching Regulator 8/16-bit PIC® Microcontroller 16-bit dsPIC® DSC Boost Controller Dashboard Illumination Signal and Warning Lights Daytime Running Lights Interior Lighting Tail Light Head up Displays Infrared Cameras Recommended Product Families for LED Applications Family Features Device Examples Switching Regulators Step-up and step-down DC-DC converters w/soft start, programmable voltage/current supply, point-of-load sequencing, intelligent temperature compensation, overvoltage and overcurrent handling MCP1252/3, MCP1601, MCP1612, MCP1650/1/2/3, TC105, TC120/5/6 Pulse Width Modulator High-speed microcontroller adaptable PWM; excellent current mode controller, fast response time, provides a very tight limit to the maximum switch current over a wide range of input voltages, low quiescent current MCP1630 Temperature Sensors Typical Accuracy: ±0.5°C, ±1.0°C; Output Options: 1) digital ouputs, 2) analog outputs, 3) serial outputs: SMBus/I2C™, SPI TC6501/2/3/4, MCP9700/1/A, MCP9800/1/2/3/5, TC72/4/5/7 Op Amps Single, dual and quad op amps, low quiescent current (600 nA), lowest IQ for a given Gain Bandwidth Product (GBWP); offered in space-saving packages MCP6041/2/3/4, MCP6141/2/3/4, MCP601/2/3/4/6/7/8/9, MCP6021/2/3/4 Microcontrollers Wide range of 8/16- RISC-based microcontrollers and digital signal controllers PIC12, PIC16, PIC18, PIC24, dsPIC30, dsPIC33 Development Tools Part Number Product DV164101 PICkit™ 1 Flash Starter Kit AC163002 PICDEM™ MSC1 Infrared (IR) Driver Daughter Board MCP1650DM-LED1 MCP1650 3W White LED Demonstration Board MCP1650DM-LED2 MCP1650 Multiple White LED Demonstration Board MCP6SX2DM-PCTLPD MCP6SX2 PGA Photodiode PICtail™ Demonstration Board MCP1252DM-BKLT MCP1252 Charge Pump Backlight Demonstration Board Automotive Applications Design Guide 7 LOW-POWER ANALOG SOLUTIONS FOR AUTOMOTIVE APPLICATIONS Solutions for Sensor Applications Application Examples Modern vehicles are networked PCs on wheels where sensors provide the interface to the real world. The number of sensors in automotive applications is rapidly increasing. Of all sensing technologies, temperature sensing is the most common. Knowing and using the actual or relative temperature is critical. For instance, other sensors such as pressure, force, flow, level and position many times require temperature monitoring in order to ensure accuracy. Key-off Applications Requiring Low Power Humidity and Pressure Sensors Level and Tilt Sensors Air Quality Sensor Light and Temperature Sensor Rain Sensor ABS TPMS PKE/RKE Dashboard Illumination Car Audio (Infotainment) Air Bags (Occupant Detect) Electronic Power Steering Hybrid Electric Vehicle Battery Monitors Signal, Warning and Daytime Running Lights Approach, Crash and Steering Angle Sensors Signal Chain Solutions Our extensive analog portfolio includes operational amplifiers and programmable gain amplifiers, voltage references, digital potentiometers, analog-to-digital converters and silicon IC temperature sensors to meet today’s demanding measurement design requirements. Signal Chain Solutions Sensor Op Amp MUX Filter A/D 8/16-bit PIC® Microcontroller 16-bit dsPIC® DSC REF Recommended Product Families for Sensor Applications Family Features Device Examples Serial Output Temp Sensors Offer excellent temperature accuracy with very low operating current; communication is accomplished via I2C™ or SPI; all devices are offered in space-saving packages and feature very fast temperature conversion times MCP9800/1/2/3/5, TC72/4/5/7/A Voltage Output Temp Sensors Temperature conversion accuracy, linear temperature slopes, small packages MCP9700/1/A, TC1046/7/A Logic Output Temp Sensors Excellent temperature accuracy (±1°C typical); low operating current (<600 μA); features include programmable hysteresis, remote temperature sensing and dual temperature limit output TC620/1/2/3/4, TC6501/2/3/4, TCN75A Programmable Gain Amplifiers (PGA) Programmable over SPI bus, adds gain control and input channel selection to MCP6S21/2/6/8, MCP6S91/2/3 the embedded control system; reduces complexity of multiple sensor system to one amplifier; lower system costs, requires less space Op Amps Single, dual and quad op amps, low quiescent current (600 nA), lowest IQ for a given Gain Bandwidth Product (GBWP); offered in space-saving packages MCP6041/2/3/4, MCP6141/2/3/4, MCP601/2/3/4/6/7/8/9, MCP6021/2/3/4 Voltage References Voltage references in SOT23-3 and TO-92 packages MCP1525/41 Digital Potentiometers A family of digital potentiometers combine high performance and low power consumption in a small package MCP4011/2/3/4, MCP4021/2/3/4, MCP41010/050/100, MCP42010/050/100 Analog-to-Digital Converters (ADC) Broad portfolio of high-precision SAR, Delta-Sigma and Dual Slope A/D Converters; SAR ADCs up to 13-bit with low power consumption combined in a small package MCP3X01/2/4/8, MCP3X21, MCP3550/1/3, TC500/00A/10/14/ 20A/30/34, TC835/50, TC7135/14433/A Microcontrollers Wide range of 8/16- RISC-based microcontrollers and digital signal controllers PIC12, PIC16, PIC18, PIC24, dsPIC30, dsPIC33 8 Automotive Applications Design Guide LOW-POWER ANALOG SOLUTIONS FOR AUTOMOTIVE APPLICATIONS Development Tools for Sensor Applications Part Number Product DV250501 MCP250XX CAN I/O Expander Developer’s Kit DV3201A MCP3XXX Single/Dual ADC MXDEV® Daughter Board DV3204A MCP3204/08 MXDEV® Daughter Board DV42XXX MCP42XXX Digital Pot MXDEV® Daughter Board DVMCPA MXDEV Analog Evaluation System MCP3221DM-PCTL MCP3221 PICtail™ Demo Board MCP3551DM-PCTL MCP3551 Delta-Sigma ADC Demo Board MCP355XDV-MS1 MCP355X Sensor Application Developer’s Board MCP402XEV MCP402X Non-Volatile Digital Potentiometer Evaluation Board MCP4XXXDM-DB MCP4XXX Digital Potentiometer Daughter Board MCP6S22DM-PICTL MCP6S22 PGA PICtail™ Demo Board MCP6S2XEV MCP6S2X PGA Evaluation Board MCP6SX2DM-PCTLTH MCP6SX2 PGA Thermistor PICtail™ Demo Board MCP9700DM-PCTL MCP9700 Temperature-to-Voltage Converter PICtail™ Demo Board MCP9800DM-DL MCP9800 Temperature Data Logger Demo Board MCP9800DM-PCTL MCP9800 Temperature Sensor PICtail™ Demo Board TC72DM-PICTL TC72 Digital Temperature Sensor PICtail™ Demo Board TC74DEMO TC74 Serial Digital Thermal Sensor Demo Board TC77DM-PICTL TC77 Thermal Sensor PICtail™ Demo Board TC1047ADM-PICTL TC1047A Temp-to-Voltage Converter PICtail™ Demo Board Automotive Applications Design Guide 9 LOW POWER ANALOG SOLUTIONS FOR AUTOMOTIVE APPLICATIONS Solutions for Connectivity Applications Connectivity within the vehicle is dominated today by two main network protocols: CAN (Controller Area Network) and LIN (Local Interconnect Network). CAN utilizes a robust, high-speed protocol, usually linking major nodes or subsystems within the vehicle, such as ABS, airbag, powertrain and suspension control modules. LIN is a lowspeed, single-wire network that usually links nodes within a vehicle subsystem, such as body electronics, headlight controls and occupant detection. Simple Sensor Node Using MCP2515 Standalone CAN Controller CAN Bus LDO 8/16-bit PIC® Microcontroller 16-bit dsPIC® DSC Sensor CAN Transceiver CAN Controller Op Amp VDD LIN Bus LIN + LDO 8/16-bit PIC® Microcontroller 16-bit dsPIC® DSC MOSFET Motor Control Node Using MCP201 LIN Transceiver MOSFET Driver Recommended Interface Product Families for Connectivity Applications Family Features Device Examples CAN Controller CAN V2.0B at 1Mb/s, two receive buffers, three transmit buffers high-speed SPI (10 MHz) MCP2515 CAN Transceiver Implements ISO 11898-2 physical layer requirements, ±40V short-circuit protection, ±250V transient protection MCP2551X CAN I/O Expander CAN V2.0B, eight general purpose I/Os, four 10-bit A/D converters, two 10-bit PWM outputs MCP25020/25/50/55 LIN Transceiver Integrated LDO regulator (5V ±5%), supports LIN rates up to 20 Kbaud, short-circuit and thermal overload protection MCP201 Development Tools Part Number Product DM163005 PICDEM™ LIN Demonstration Board DM163007, DM163011, DM163015 PICDEM™ CAN-LIN 1, 2 and 3 Demonstration Boards DV250501 MCP250XX CAN I/O Expander Developer’s Kit DV251001 MCP2510/2515 CAN Developer’s Kit MCP2515DM-PCTL MCP2515 CAN Controller PICtail™ Demonstration Board SOIC8EV SOIC 8-Lead Evaluation Board 10 Automotive Applications Design Guide Motor LOW POWER ANALOG SOLUTIONS FOR AUTOMOTIVE APPLICATIONS Application Notes and Additional Documentation Available Application Document Number Connectivity AN228 A CAN Physical Layer Discussion Connectivity AN729 LIN Protocol Implementation Using PIC® MCUs Connectivity AN754 Understanding Microchip’s CAN Module Bit Timing Connectivity AN816 A CAN System Using Multiple MCP25025 I/O Expanders Low-Frequency Communications/PKE AN232 Low-Frequency Magnetic Transmitter Design Low-Frequency Communications/PKE AN238 Tire Pressure Monitoring (TPM) System Low-Frequency Communications/PKE AN879 Using the Microchip Ultra Low-power Wake-up Low-Frequency Communications/PKE AN959 Using the PIC16F639 MCU for Smart Wireless Low-Frequency Communications/PKE AN1024 PKE System Design Using the PIC16F639 Low-Frequency Communications/PKE TB090 MCP2030 Three-Channel Analog Front-End Low-Frequency Communications/PKE TB088 PIC16F639 Microcontroller Overview Motor Control AN799 Matching MOSFET Drivers to MOSFETs Motor Control AN894 Motor Control Sensor Feedback Circuits Title Motor Control AN898 Determining MOSFET Driver Needs for Motor Drive Applications Motor Control AN885 Brushless DC (BLDC) Motor Fundamentals Motor Control AN857 Brushless DC Motor Control Made Easy Motor Control AN763 Latch-Up Protection for MOSFET Drivers Motor Control AN807 Low-Cost DC Motor Speed Control with CMOS ICs Power Supply AN216 DC-DC Converter Controller using a PIC® Microcontroller Power Supply AN686 Understanding and Using Supervisory Circuits Power Supply AN761 LDO Thermal Considerations Power Supply AN765 Using Microchip’s Micropower LDOs Power Supply AN766 Pin-compatible CMOS Upgrades to Bipolar LDOs Power Supply AN763 Latch-Up Protection for MOSFET Drivers Power Supply TB081 Soft-Start for Switching Power Supplies Power Supply TB085 A Simple Circuit for Driving Microcontroller Friendly PWM Generators LED/Lighting AN874 Buck Configuration High-Power LED Driver LED/Lighting AN948 Efficiently Powering Nine White LEDs with the MCP1650 LED/Lighting TB029 Complementary LED Drive LED/Lighting TB060 Drive High Intensity White LEDs Efficiently Using the PIC16C781 LED/Lighting TB062 High-Power IR LED Driver Using the PIC16C781/782 LED/Lighting DS40040 PIC® Comparator Tips ‘n Tricks LED/Lighting DS41215 8-pin Flash PIC® Microcontroller Tips ‘n Tricks Sensors/Signal Chain AN251 Bridge Sensing with the MCP6S2X PGAs Sensors/Signal Chain AN679 Temperature Sensing Technologies Sensors/Signal Chain AN688 Layout Tips for 12-bit A/D Converter Application Sensors/Signal Chain AN691 Optimizing the Digital Potentiometer in Precision Circuits Sensors/Signal Chain AN695 Interfacing Pressure Sensors to Microchip’s Analog Peripherals Sensors/Signal Chain AN699 Anti-Aliasing, Analog Filters for Data Acquisition Systems Sensors/Signal Chain AN845 Communicating with the MCP3221 using PIC Microcontrollers Sensors/Signal Chain AN865 Sensing Light with a Programmable Gain Amplifier Sensors/Signal Chain Sensors/Signal Chain AN866 AN981 Temperature Sensing with a Programmable Gain Amplifier Interfacing the MPC9700 Analog Output Temperature Sensor to a PIC® Microcontroller Sensors/Signal Chain AN988 Interfacing the MCP9800 I2C™ Digital Temperature Sensor to a PIC® Microcontroller Sensors/Signal Chain TB051 Precision Temperature Measurement using a TC1046/TC1047 Sensor and a PIC16F872 Microcontroller Automotive Applications Design Guide 11 Support Training Microchip is committed to supporting its customers in developing products faster and more efficiently. We maintain a worldwide network of field applications engineers and technical support ready to provide product and system assistance. In addition, the following service areas are available at www.microchip.com: ■ Support link provides a way to get questions answered fast: http://support.microchip.com ■ Sample link offers evaluation samples of any Microchip device: http://sample.microchip.com ■ Forum link provides access to knowledge base and peer help: http://forum.microchip.com ■ Buy link provides locations of Microchip Sales Channel Partners: www.microchip.com/sales If additional training interests you, then Microchip can help. We continue to expand our technical training options, offering a growing list of courses and in-depth curriculum locally, as well as significant online resources – whenever you want to use them. ■ Regional Training Centers: www.microchip.com/rtc ■ MASTERs Conferences: www.microchip.com/masters ■ Worldwide Seminars: www.microchip.com/seminars ■ eLearning: www.microchip.com/webseminars ■ Resources from our Distribution and Third Party Partners www.microchip.com/training Sales Office Listing AMERICAS Atlanta Tel: 678-957-9614 Boston Tel: 774-760-0087 Chicago Tel: 630-285-0071 Cleveland Tel: 216-447-0464 Dallas Tel: 972-818-7423 Detroit Tel: 248-538-2250 Kokomo Tel: 765-864-8360 Los Angeles Tel: 949-462-9523 Santa Clara Tel: 408-961-6444 Toronto Mississauga, Ontario Tel: 905-673-0699 EUROPE Austria - Wels Tel: 43-7242-2244-39 Denmark - Copenhagen Tel: 45-4450-2828 France - Paris Tel: 33-1-69-53-63-20 Germany - Munich Tel: 49-89-627-144-0 Italy - Milan Tel: 39-0331-742611 Netherlands - Drunen Tel: 31-416-690399 Spain - Madrid Tel: 34-91-708-08-90 UK - Wokingham Tel: 44-118-921-5869 ASIA/PACIFIC Australia - Sydney Tel: 61-2-9868-6733 China - Beijing Tel: 86-10-8528-2100 China - Chengdu Tel: 86-28-8665-5511 China - Hong Kong SAR Tel: 852-2401-1200 China - Nanjing Tel: 86-25-8473-2460 China - Qingdao Tel: 86-532-8502-7355 China - Shanghai Tel: 86-21-5407-5533 China - Shenyang Tel: 86-24-2334-2829 China - Shenzhen Tel: 86-755-8203-2660 China - Wuhan Tel: 86-27-5980-5300 China - Xiamen Tel: 86-592-2388138 China - Xian Tel: 86-29-8833-7252 China - Zhuhai Tel: 86-756-3210040 ASIA/PACIFIC India - Bangalore Tel: 91-80-3090-4444 India - New Delhi Tel: 91-11-4160-8631 India - Pune Tel: 91-20-2566-1512 Japan - Yokohama Tel: 81-45-471- 6166 Korea - Daegu Tel: 82-53-744-4301 Korea - Seoul Tel: 82-2-554-7200 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Malaysia - Penang Tel: 60-4-227-8870 Philippines - Manila Tel: 63-2-634-9065 Singapore Tel: 65-6334-8870 Taiwan - Hsin Chu Tel: 886-3-572-9526 Taiwan - Kaohsiung Tel: 886-7-536-4818 Taiwan - Taipei Tel: 886-2-2500-6610 Thailand - Bangkok Tel: 66-2-694-1351 1/26/09 Information subject to change. The Microchip name and logo, the Microchip logo, dsPIC and PIC are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab and MXDEV are registered trademarks of Microchip Technology Incorporated in the U.S.A. dsPICDEM, PICkit, PICDEM and PICtail are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies. © 2009, Microchip Technology Incorporated. All Rights Reserved. Printed in the U.S.A. 2/09 DS01005C *DS01005C* www.microchip.com Microchip Technology Inc. 2355 W. Chandler Blvd. Chandler, AZ 85224-6199