UNISONIC TECHNOLOGIES CO., LTD UT3416-H Power MOSFET 6.7A, 20V N-CHANNEL MOSFET DESCRIPTION The UTC UT3416-H is an N-Channel MOSFET, it uses UTC’s advanced technology to provide customers with a minimum on-state resistance and high switching speed, etc. The UTC UT3416-H is suitable for high efficiency fast switching applications. FEATURES * RDS(ON)<19mΩ @ VGS=4.5V, ID=4A * High switching speed * Improved dv/dt capability SYMBOL ORDERING INFORMATION Note: Ordering Number UT3416G-AE2-R Pin Assignment: G: Gate D: Drain Package SOT-23-3 Packing Tape Reel S: Source MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 5 QW-R208-052.A UT3416-H Power MOSFET ABSOLUTE MAXIMUM RATINGS (TC=25°C, unless otherwise noted) PARAMETER SYMBOL VDSS VGSS RATINGS UNIT 20 V ±10 V TC=25°C 6.7 A Continuous ID Drain Current TC=100°C 4.2 A Pulsed (Note 1) IDM 26.8 A TC=25°C 1.56 W Power Dissipation PD Derate above 25°C 0.012 W/°C Junction Temperature TJ -55~+150 °C Storage Temperature Range TSTG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Drain-Source Voltage Gate-Source Voltage THERMAL CHARACTERISTICS PARAMETER SYMBOL θJA Junction to Ambient RATINGS 80 UNIT °C/W ELECTRICAL CHARACTERISTICS (TJ=25°C, unless otherwise noted) PARAMETER OFF CHARACTERISTICS Drain-Source Breakdown Voltage BVDSS Temperature Coefficient SYMBOL TEST CONDITIONS BVDSS ID=250µA, VGS=0V △BVDSS/△TJ Reference to 25°C, ID=1mA VDS=20V, VGS=0V, TJ=25°C Drain-Source Leakage Current IDSS VDS=16V, VGS=0V, TJ=125°C Forward VGS=+10V, VDS=0V Gate-Source Leakage Current IGSS Reverse VGS=-10V, VDS=0V ON CHARACTERISTICS Gate Threshold Voltage VGS(TH) VDS=VGS, ID=250µA VGS(TH) Temperature Coefficient △VGS(TH) VGS=4.5V, ID=4A Static Drain-Source On-State Resistance RDS(ON) VGS=2.5V, ID=3A VGS=1.8V, ID=2A Forward Transconductance gFS VDS=10V, ID=4A DYNAMIC PARAMETERS Input Capacitance CISS VGS=0V, VDS=10V, f=1.0MHz Output Capacitance COSS Reverse Transfer Capacitance CRSS SWITCHING PARAMETERS Total Gate Charge (Note 2, 3) QG VGS=4.5V, VDS=10V, ID=4A Gate to Source Charge (Note 2, 3) QGS Gate to Drain Charge (Note 2, 3) QGD Turn-ON Delay Time (Note 2, 3) tD(ON) Rise Time (Note 2, 3) tR VDD=10V, VGS=4.5V, ID=1A, RG=25Ω Turn-OFF Delay Time (Note 2, 3) tD(OFF) Fall-Time (Note 2, 3) tF SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS Continuous Source Current IS VG=VD=0V , Force Current Pulsed Source Current ISM Drain-Source Diode Forward Voltage VSD IS=1A, VGS=0V, TJ=25°C Notes: 1. Repetitive Rating: Pulsed width limited by maximum junction temperature. 2. The data tested by pulsed, pulse width≤300µs, duty cycle≤2%. 3. Essentially independent of operating temperature. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 20 0.02 0.3 0.6 2 15 18 23 9.5 V V/°C 1 µA 10 µA +100 nA -100 nA 0.8 V mV/°C 19 mΩ 24 mΩ 32 mΩ S 600 870 70 100 45 65 pF pF pF 5.8 0.6 2 5.0 14.4 30.0 9.2 8 1 4 9 27 55 17 nC nC nC ns ns ns ns 6.7 26.8 1 A A V 2 of 5 QW-R208-052.A UT3416-H Power MOSFET TEST CIRCUITS AND WAVEFORMS VGS VDS 90% QG 10V/4.5V QGS QGD 10% VGS tR td(ON) tON td(OFF) tF tOFF Switching Time Waveform UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Charge Gate Charge Waveforms 3 of 5 QW-R208-052.A UT3416-H Power MOSFET TYPICAL CHARACTERISTICS Normalized RDSON, (mΩ) Continuous Drain Current, ID (A) Gate Charge Waveform 1.3 Gate to Source Voltage , -VGS (V) 4.5 1.1 0.9 0.7 0.5 -50 5 0.0 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3.6 2.7 1.8 0.9 0 0 0 50 100 150 5 Junction Temperature, TJ (°C) ID=4A, VDS=10V 1.5 3 4.5 Gate Charge, QG (nC) 6 Continuous Drain Current, ID (A) Normalized Thermal Response (RθJA) Normalized Gate Threshold Voltage (V) Normalized VTH vs. TJ 4 of 5 QW-R208-052.A UT3416-H Power MOSFET UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R208-052.A