SDISE-100 (Ver. 1.1) www.opticis.com DATA SHEET Miniature Fiber Optic 3G-SDI Digital Video Extension Modules For HDCCTV Contents Description Features Applications Technical Specifications Drawing Cable Connection Environmental Reliability Test Terminology OPTICIS HQ Opticis Co., Ltd. #907, Byucksan Technopia, 434-6 Sangdaewon-Dong, Chungwon-Gu, Sungnam City, Gyeonggi-Do, 462-716 South Korea Te l: +82 (31) 737-8033~8 Fax: +82 (31) 737-8079 www.opticis.com [email protected] Copyright © 2011, All rights reserved by Opticis Co., Ltd. -1- Jul. 2011 SDISE-100 (Ver. 1.1) www.opticis.com Fiber Optic 3G-SDI Extension Module Description OPTICIS miniature 3G-SDI extender is an optimized and high-end level solution designed for transmission of multi-rate digital video including 3G-SDI, HD-SDI and SD-SDI over one (1) ST single-mode fiber-optic cable. Supporting the new 1080p, 3G-SDI format, it converts and transmits one (1) channel of 3G-SDI (SMPTE-424M), HD-SDI (SMPTE-292M) or SD / ED-SDI (SMPTE-259M/344M) serial digital video signal perfectly over long distance right after its transmitter receive the input signal. It adopts ST terminated fiberoptic connector and 75Ohm HD-SDI BNC input connector for wide range of application. Due to the use of advanced digital fiber optic transmission technology, no user adjustments are required in the Mini 3G-SDI extender system, enabling quick setup and trouble-free operation. It comes with a miniature metal die-casting enclosure for harsh applications including security, staging, medical, military and more for your world. The modules are consisted of two (2) parts as follows; - One transmitter converting digital video signal to optical signals, model name: SDISE-100-T - One receiver converting optical signals to digital video signals, model name: SDISE-100-R The package includes as follows; - One (1) pair of transmitter and receiver - Two (2) DC +5V / 1A Adaptors - User manual Features Supports multi-rate SDI up to 3G-SDI (SMPTE-424M). Extends up to 2km @3Gbps. Transmits multi-rate SDI digital video over one (1) fiber. DC 5V 1A input Wide range of operating temperature: 0 ~ 50℃ HD-SDI BNC input connector and ST terminated fiber optical connector. Robust metal die-casting enclosure for harsh environment. Copyright © 2011, All rights reserved by Opticis Co., Ltd. -2- Jul. 2011 SDISE-100 (Ver. 1.1) www.opticis.com Applications Security systems installing remote HDCCTV camera to DVR or monitoring room using 3G-SDI digital video extension. Fiber optic applications with free-interference using 3G-SDI signals including staging, medical, military, government and security purposes. Technical Specifications - General Specifications Components Electrical Optical Connect - Parameter Laser Diodes in TX Module Photo Diodes in RX Module Input and Output Signals Data Transfer Rate (Graphic Data) Total Jitter at the end of Rx output Propagation Delay Link Power Budget Optical Connector Electric Connector Type from Modules Recommended Fiber Specifications 1310 FP laser diode InGaAs/InP PIN photo diode SMPTE 424M/292M/259M Max. 3Gbps Max. 0.3UI Max. 40ns Min 11dB ST Connector 75Ohm BNC (Male) Standard single-mode fiber Absolute Maximum Ratings Parameter Supply Voltage Operating Temperature Storage Temperature Storage Relative Humidity Symbol VCC Top Tsto RHsto Minimum +4.5 0 - 30 0 Copyright © 2011, All rights reserved by Opticis Co., Ltd. -3- Maximum +5.5 50 + 70 85* Units V C C %RH Jul. 2011 SDISE-100 (Ver. 1.1) www.opticis.com Operating Conditions Transmitter module (E-to-O converter) : SDISE-100-T - Power Supply Electrical Link Optical Link Parameter Supply Voltage Supply Current Power Dissipation Power Supply Rejection (Note1) Input Signal Input Impedance Input Signal Level Return Loss Propagation Delay Data rate Output Optical Power Wavelength Spectral width in RMS Extinction Ratio Rising Time (Note2) Falling Time (Note2) Jitter in p-p value Symbol Vcc ITCC PTX Minimum 4.5 - Typical 5 220 1.1 Maximum 5.5 - Units V mA W - 50 - mVp-p PSR SMPTE 424M/292M/259M 75 720 800 880 10 1.5 3 -9 -4 1290 1310 1330 5 7 200 200 80 - ZIN Po Ext Trise Tfall Tjitter mVp-p Ω mVp-p dB ns Gbps dBm nm nm dB ps ps ps Note1. Tested with a 50mVp-p sinusoidal signal in the frequency range from 500 Hz to 500 MHz on the V CC supply with the recommended power supply filter in place. Typically less than a 0.25 dB change in sensitivity is experienced. Note2. 20% - 80%; Measured unfiltered @ 3Gbps Receiver module (O-to-E converter): SDISE-100-R Power Supply Electrical Link Parameter Supply Voltage Supply Current Power Dissipation Power Supply Rejection (Note1) Output Signal Output Impedance Output Signal Level Return Loss Propagation Delay Data rate Total Jitter Symbol Vcc ITCC PTX Minimum 4.5 - Typical 5 160 0.8 Maximum 5.5 - Units V mA W - 50 - mVp-p PSR Optical Link TRjitter SMPTE 424M/292M/259M 75 720 800 880 10 40 3 0.2 0.3 mVp-p Ω mVp-p dB ns Gbps UI Receiving Optical Power Po -20 - 0 dBm Wavelength 1100 1310 1650 nm Power Budget Pbgt - 12 - dB ZIN Copyright © 2011, All rights reserved by Opticis Co., Ltd. -4- Jul. 2011 SDISE-100 (Ver. 1.1) www.opticis.com - Recommended Specifications of Fibre-Optic Cables Parameters Fibre Type Modal Bandwidth Fiber Cable Attenuation No. of Ferrules Skew Insertion Attenuation Total Optical Attenuation Conditions Glass single-mode Fiber = 1310nm, 1550nm = 1310nm, 1550nm ST Connector - Specifications 9.5±/ 125±2m Min. 400 MHz km >0.3dBdB/km 1 ferrules 2% 1.6% 30mm Drawing of Modules Dimension [mm] Note: The transmitter, SDISE-100-T and the receiver, SDISE-100-R have the same mechanical dimensions. Copyright © 2011, All rights reserved by Opticis Co., Ltd. -5- Jul. 2011 SDISE-100 (Ver. 1.1) www.opticis.com Drawing of Cable Connections The diagram shows the connection of transmitter (Tx; Connect to SDI source like a HDCCTV camera) and receiver (Rx; Connect to SDI display) modules by using one (1) ST patch cord fiber. On e( Up SDISE-100-T 1) to Op tica lF 2K ibe m r SDISE-100-R SDI Source SDI Display Copyright © 2011, All rights reserved by Opticis Co., Ltd. -6- Jul. 2011 SDISE-100 (Ver. 1.1) www.opticis.com EMC Test Data 1) EMI: Meet FCC class A (ICES-003) and CE class A STANDARDS EN 55 022 (CISPR22) FCC; PART 15 SUBPART B CONDITIONS CE (Conducted Emission) & RE (Radiated Emission) Meet Class A EN 61000-3-2 (IEC 61000-3-2) Harmonics Meet Class A EN 61000-3-3 (IEC 61000-3-3) Flickers Meet Class A 2) EMS: Meet CE standards (EN 55024) and CISPR24 equivalents STANDARDS EN 61 000-4-2:1995 EN 61 000-4-3:1996 CONDITIONS Electrostatic Discharge Immunity (Air: 8kv, Contact: 4kv) Radiated RF E-Field (80~1000 MHz) 3V/m (AM 80%, 1kHz) Meet Criterion B Meet Criterion A EN 61 000-4-4:1995 Fast Transients (5kHz, 60Seconds) Meet Criterion B EN 61 000-4-5:1995 Surge Transients Meet Criterion B EN 61 000-4-6:1996 Conducted Susceptibility (CS) Radiated Susceptibility (RS) Meet Criterion A EN 61 000-4-11:1994 Voltage Dips, Interruption & Variation Meet Criterion C Terminology SDI SMPTE Serial Digital Interface referring to a family of video interfaces standardized by SMPTE. The Society of Motion Picture and Television Engineers or SMPTE, founded in 1916 as the Society of Motion Picture Engineers or SMPE, is an international professional association, based in the United States of America. SMPTE-424M Standard published by SMPTE expanding upon SMPTE-259M, SMPTE-344M, and SMPTE-292M allowing for bit-rates of 2.970Gbit/s and 2.970/1.001Gbit/s over a single-link coaxial cable. These bit-rates are sufficient for 1080p video at 50 or 60 frames per second. The signal formats carried over SMPTE-424M are specified in SMPTE-425M. SMPTE-344M Standard published by SMPTE which expands upon SMPTE-259M allowing for bit-rates of 540 Mbit/s, allowing EDTV resolutions of 480p and 576p. This standard is part of a family of standards that define a Serial Digital Interface. EMI Electro Magnetic Interference. EMS Electro Magnetic Susceptibility. RFI Radio Frequency Interference. Copyright © 2011, All rights reserved by Opticis Co., Ltd. -7- Jul. 2011