AVFX-100 (Ver. 1.0) www.opticis.com DATA SHEET Optical VGA/Audio/RS-232 Extender AVFX-100 Contents Description Features Application Absolute Maximum Ratings Recommended Operating Conditions Electrical Power Supply Characteristics Optical and Electrical Characteristics VGA Pin Description RS232 Pin Description Reliability Test Connection Diagram Headquarters Opticis Co., Ltd # 304, Byucksan Technopia 434-6 Sangdaewon-Dong, Chungwon-Ku Sungnam City, Kyungki-Do, 462-120 South Korea Tel: +82 (31) 737-8033 Fax: +82 (31) 707-8079 Email: [email protected] www.opticis.com Copyright © 2012, All rights reserved, Opticis Co., Ltd. AVFX-100 (Ver. 1.0) www.opticis.com Description AVFX-100 enables integrated extension of Analog RGB video, audio and serial interface up to 2 km (6,560feet) over two (2) single-mode / 300m (985feet) over two(2) multi-mode fibers of LC connector. Designed for high resolution performance, it uses zero compression technology to deliver perfect graphic data transmission up to UXGA (1600x1200) at 60Hz refresh rate. It is designed to multiplex and de-multiplex RGB video, stereo audio, Display Data Channel (DDC) command interface and serial data so as to be linked over two (2) single-mode LC fibers. It is compatible with DDC2B up to 100 kHz clock speed. AVFX-100 supports connecting serial data communication interfaces RS-232. Serial interface offers device-to-device and device-to-controller connections to build up control system for A/V integration. It also includes integrator-friendly features such as an output for local monitoring, rack-mount capability and real time system monitoring. It gives benefits of all-glass fiber transmission medium, data security, long distance extension up to 2km, easy plug-and-go installation and no RFI/EMI effects. The AVFX-100 consists of an Uplink (or transmitter; Tx) and a Downlink (or receiver; Rx), connected by two duplex LC terminated single or multi-mode patch cords between them, which offers electrical perfect isolation. Each link module is driven by +5V/3A DC power adaptor. The shipping group is as follows; Tx and Rx boxes: One (1) Transmitter module & One (1) Receiver module. AC/DC power adapter: Two (2) +5V/3A units User’s Manual Option: Duplex LC Patch Cord (Single or Multi mode glass fiber). Copyright © 2012, All rights reserved, Opticis Co., Ltd. -1- AVFX-100 (Ver. 1.0) www.opticis.com Features AVFX-100-TR Analog Video/Audio and Serial I/O Optical Extender Extends VGA, Audio and RS-232 with both single and multi-mode fiber. (1) up to 2km (6,560feet) over two (2) single-mode fibers. (2) up to 300m (985feet) over two (2) multi-mode fibers. Maintains high resolution of 1600 x 1200, 24bits colors with zero compression technology. Support Auto Tuning mode to refine display quality. Complies with DDC2B up to 100kHz of clock speed. Provides loop through output in transmitter for a local monitoring. Supports RS-232. Supports analog stereo (3.5mm) standard jack. Offers LED indicators for status (Power, Video, Audio, Data) and Link Error. 1U half rack mountable Dimensions: 220mm / 140mm / 40mm (W/D/H) Weight: 0.46kg for each of Transmitter and Receiver. Environmental Specifications Operating temperature: 0°C to 50°C Storage temperature: - 10°C to 85°C Humidity: 5% to 85% Power Adapter Power Output: +5V, 3.0 A SMPS DC-power Adapter Applications Digital display system integration for medical, military, aerospace, factory automation, and traffic control platforms.Digital FPD, PDP and projector installation in conference rooms, auditoriums and for kiosk systems LED signboards for large scale information display and stadiums Copyright © 2012, All rights reserved, Opticis Co., Ltd. -2- AVFX-100 (Ver. 1.0) www.opticis.com Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage Symbol Tstg VCC Minimum - 10 4.5 Maximum + 85 5.5 Units C V Recommended Operating Conditions Parameter Ambient Operating Temperature Data Output Load Power Supply Rejection (Note1) Supply Voltage Symbol TA RLD PSR VCC Minimum 0 + 4.5 Typical 75 50 +5 Maximum + 40 + 5.5 Units C Ω mVp-p V Note1. Tested with a 50mVp-p sinusoidal signal in the frequency range from 500 Hz to 500 MHz on the V CC supply with the recommended power supply filter in place. Typically less than a 0.25 dB change in sensitivity is experienced. Electrical Power Supply Characteristics (TA = 0 C to +50 C, unless otherwise noted) Parameter Supply Voltage Supply Current Power Dissipation TX RX TX RX Symbol VCC ITCC IRCC PTX PRX Minimum 4.5 2375 2375 11.875 11.875 Copyright © 2012, All rights reserved, Opticis Co., Ltd. -3- Typical 5 2500 2500 12.5 12.5 Maximum 5.5 2675 2375 13.125 13.125 Units V mA mA W W AVFX-100 (Ver. 1.0) www.opticis.com Optical & Electrical Characteristics Parameters Symbol 1310/1550 Tx Data Bit Rate 1310 Rx 1310/1550 Rx Condition Unit PRBS 2 -1,NRZ 23 Mbps 23 Mbps PRBS 2 -1,NRZ 1310 Tx (Top = 25℃) Min. Typ. Max. 2500/2500 155 2500/2500 155 Remark -10 Fiber Length 9µum core SMF 10 BER, 155Mbps/2.5Gbps km 1 TRANSMITTER Average Power Output POUT Extinction Ratio ER Center Wavelength C Spectral Width dBm -12 -15 dB 7 CW, @ POUT nm 1270 1500 RMS Width nm If=IBIAS + Imod/2 RIN Optical Rise/Fall Time tr/tf 20 – 80% Sensitivity (Average Input Power) 1310 Wavelength 1550 Receiver Overload Signal Detect Threshold Decreasing light input Increasing light input PIN,MIN PRBS 2 -1, -10 10 BER -9 -10 -6 -8 11 1310 1550 1355 @1.31 µm 1600 @1.55 µm 5.0 dB/Hz -120 nsec 0.15 RECEIVER 23 dBm nm -25 -19 1260 1480 -3.0 PIN,MAX dBm PD PA dBm dBm Signal Detect Hysteresis PA - PD dB 0.5 Parameters Symbol Unit Min. Condition 155M Rx 2.5G Rx 1310 1550 1360 1620 PIN,MIN-3 PIN,MIN-2 Typ. Max. Audio (Analog) Analog Sample Rate Faudio_a kHz 48 Input level output level Input Impedance Output Impedance Ain Aout Vpp Vpp kΩ Ω 0.56Vss 0.65 25 100 75 714 H Sync Frequency Range Ohm mVpp V kHz 3 31.5 5 85 V Sync Frequency Range Hz 30 85 Vpp=3.3V/Analog Video (Analog) Input impedance Input Level RGB video RGB video H sync, V sync Copyright © 2012, All rights reserved, Opticis Co., Ltd. -4- Remark AVFX-100 (Ver. 1.0) www.opticis.com VGA Pin Description Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Symbol RED Video GREEN Video BLUE Video ID2 GND R GND G GND B GND KEY SGND ID0 ID1 HSYNC VSYNC ID3 Functional Description RED Video GREEN Video BLUE Video No pin installed Ground RED Ground GREEN Ground BLUE Ground No pin installed Sync Ground No pin installed DDC Data Horizontal Sync Vertical Sync DDC Clock RS232C Pin Description Pin 1 2 3 4 5 6 7 8 9 Symbol Received Line Signal Detector RD TD Data Terminal Ready GND Data Set Ready Request To Send Clear To Send NC Functional Description Connected with Pin4 & Pin6 in module Data Receive: Uplink Downlink Data Transmit: Uplink Downlink Connected with Pin1 & Pin6 in module Signal Ground Connected with Pin1 & Pin4 in module Connected with Pin8 in module Connected with Pin7 in module Connection tips: 1) Connection of PC-to-PC: Cross connection of pins 2 and 3 between two PCs. 2) Connection of PC-to-Device: Straight connection of pin 2:2 and pin 3:3 Copyright © 2012, All rights reserved, Opticis Co., Ltd. -5- AVFX-100 (Ver. 1.0) www.opticis.com Reliability Test Opticis utilizes three types of test criteria for a reduction of variability and a continuous improvement of the process by its FEMA (Failure Mode and Effective Analysis) program. 1) Mechanical test (vibration, shock) 2) Temperature & humidity tests Temperature & Humidity Test Data Heading Operating Test Storage Test Test Operating at each Temperature Conditions 30 Min * 0 ~ 50 °C (Interval: 10 °C) (See Note) Sample Failure Size Duration (Each n =3 0 Remarks Note: Visual Test on the Display Temperature) Low Temperature * TS = -30 °C 96 HR n=3 0 1. TS: Storage Temperature High Temperature * TS = 85 °C 96 HR n=3 0 2. RH: Relative Humidity High Humidity * TS: 60 °C High Temperature 96 HR n=3 0 * RH: 90% Connection Diagram UXGA up to 2Km rs ibe A Tr VFX an sm -100 itte r 2) o( Tw lF tica p O AV Re FXce 100 ive r VGA Local Display Audio Source VGA Source VGA Remote Display Audio Output Copyright © 2012, All rights reserved, Opticis Co., Ltd. -6- RS-232 Device