Conductive Polymer Aluminum Solid Capacitors Radial Lead Type Series : SXE Features ● Super ● RoHS high voltage (100 V.DC max.) compliance, Halogen free Specifications Size code Category temperature range Rated voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Damp heat (Steady State) E12 –55 °C to +105 °C 63 V.DC to 100 V.DC 15 µF to 33 µF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list +105 °C, 5000 h, rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 150 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Dimensions (not to scale) fd±0.05 fD±0.5 Polarity marking (−) Lot. No. + F Marking – Series L max. 15 min. 4 min. 19 min. Unit : mm R. Capacitance Size code R. Voltage E12 fD±0.5 8.0 L max. 12.0 F±0.5 3.5 fd±0.05 0.6 ✽ Externals of figure are the reference. Characteristics list Series SXE Rated Rated voltage capacitance (V.DC) (µF) 63 100 33 15 Case size (mm) fD L 8.0 8.0 12.0 12.0 Size code E12 Specifications Ripple ✽1 ESR ✽2 current tan d ✽3 (mΩ max.) (mAr.m.s.) 2950 25 0.12 2350 40 0.12 LC ✽4 (µA) 104 75 Part number 63SXE33M 100SXE15M ✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes ◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency Coefficient 120 Hz < f < 1 kHz 0.05 1 kHz < f < 10 kHz 0.3 10 kHz < f < 100 kHz 0.7 100 kHz < f < 500 kHz 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015