JUMBO BUTTON AUTOMOTIVE RECTIFIER JAR8005 THRU JAR806 VOLTAGE RANGE 50 to 600 Volts CURRENT 80.0 Amperes JAR FEATURES • • • • .406(10.3)DIA .394(10.0)TYP Low Leakage Low forward voltage drop High current capability High forward surge current capacity .275(7.0) .169(6.7) .185(4.7) .169(4.3) .245(6.2) .230(5.9) MECHANICAL DATA • • • • • • .228(5.8) .220(5.6) Case: transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Plated slug , solderable per MIL-STD-202E method 208C Polarity: Color ring denotes cathode end Mounting Position: any Weight: 0.085 ounces, 2.40 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS JAR8005 JAR801 JAR802 JAR804 JAR806 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 Volts Maximum Average Forward Rectified Current, At Tc=110℃ IO 80.0 Amps IFSM 700 Amps VF 1.02 Volts Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Maximum instantaneous Forward Voltage at 100A Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage per element TA=100℃ Typical Thermal Resistance Operating and Storage Temperature Range 5.0 IR RθJC ℃ (-65 to +175) Red Notes: 1. ℃/W 0.8 TJ,TSTG Polarity and voltage demotion color band UA 500 Enough heatsink must be considered in application. Web Site: www.hkmic.com Yellow Silver Orange Green JUMBO BUTTON AUTOMOTIVE RECTIFIER JAR8005 THRU JAR806 VOLTAGE RANGE 50 to 600 Volts CURRENT 80.0 Amperes RATINGS AND CHARACTERISTIC CURVES JAR8005 THRU JAR806 F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 800 PEAK FORWARD SURGE CURRENT,(A) AVERAGE FORWARD CURRENT, (A) 80 70 60 50 40 30 Single Phase 8.3ms Single Half Sine-Wave 600 (JEDEC Method) Tj=Tj max 500 400 300 200 Half Wave 60Hz 20 700 1 Cycle Resistive or 100 Inductive Load 10 1 2 4 6 8 10 20 40 60 100 0.375″(9.5mm) Lead Length NUMBER OF CYCLES AT 60 Hz 0 0 25 50 75 110 100 125 150 175 CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) INSTANTANEOUS FORWARD CURRENT, (A) 1000 100 10 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 0.8 1.0 1.2 1.4 1.6 40 SQUARE WAVE 20 0 0 10 30 50 70 AVERAGE FORWARD CURRENT, (A) 1.0 0.1 0.6 60 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) Web Site: www.hkmic.com 90