VY1 Compact Series www.vishay.com Vishay BCcomponents AC Line Rated Ceramic Disc Capacitors Class X1, 760 VAC, Class Y1, 500 VAC FEATURES • • • • • • • Complying with IEC 60384-14 4th edition Can pass 10 kV pulses (10 per polarity) Reduced size (compact design) High reliability Vertical (inline) kinked or straight leads Singlelayer AC disc safety capacitors Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 2 Ceramic Dielectric Y5U Y5U Voltage (VAC) 500 760 X1, Y1 according to IEC 60384-14.4 Across-the-line Line by-pass Antenna coupling DESIGN -40 °C to +125 °C The capacitor consists of a ceramic disc which is copper plated on both sides. Connection leads are made of tinned copper clad steel having a diameter of 0.6 mm. The capacitors may be supplied with vertical (inline) kinked leads having a lead spacing of 10.0 mm, or 12.5 mm. Encapsulation is made of flame retardant epoxy resin in accordance with UL 94 V-0. TEMPERATURE CHARACTERISTICS CAPACITANCE RANGE Y5U 470 pF to 4700 pF SECTIONAL SPECIFICATIONS RATED VOLTAGE UR Climatic category (according to EN 60058-1) 40/125/21 IEC 60384-14.4: (X1): 760 VAC, 50 Hz (Y1): 500 VAC, 50 Hz Min. Capacitance (pF) 470 Max. Capacitance (pF) 4700 Mounting Radial OPERATING TEMPERATURE RANGE COATING According to UL 94 V-0 Epoxy resin, isolating, flame retardant Halogen-free APPROVALS IEC 60384-14.4 UL 60384-14 DIN EN 60384-14 CSA E60384-1:03, CSA E60384-14:09 CQC11-471112-2009 TEST VOLTAGE Component test (100 %): 4000 VAC, 50 Hz, 2 s Random sampling test (destructive test): 4000 VAC, 50 Hz, 60 s Voltage proof of coating (destructive test): 4000 VAC, 50 Hz, 60 s INSULATION RESISTANCE 10 000 M PACKAGING CAPACITANCE TOLERANCE Bulk, tape and reel, taped ammopack ± 20 % DISSIPATION FACTOR Max. 2.5 % (1 kHz) Revision: 16-Feb-16 Document Number: 28555 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VY1 Compact Series www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters F e = 3.0 max. SH = 4.0 max. Ø 0.6 ± 0.05 Dmax. Tmax. L = 30.0 ± 5.0 Capacitors with 10.0 mm or 12.5 mm lead spacing TECHNICAL DATA CAPACITANCE TOLERANCE (%) CAPACITANCE C (pF) BODY DIAMETER Dmax. (mm) 470 BODY THICKNESS Tmax. (mm) PART NUMBER LEAD SPACING F (mm) ± 1 mm MISSING DIGITS SEE ORDERING CODE BELOW VY1471M29Y5UC6### 7.5 680 VY1681M29Y5UC6### 1000 8.0 VY1102M31Y5UC6### 1500 9.0 VY1152M35Y5UC6### 2200 11.0 ± 20 5.0 VY1222M43Y5UC6### 10.0 or 12.5 2700 12.0 VY1272M47Y5UC6### 3300 13.0 VY1332M51Y5UC6### 3900 15.0 VY1392M59Y5UC6### 4700 15.5 VY1472M61Y5UC6### Notes • Straight leads available on request • Coating extension DR valid for straight leads only ORDERING CODE # 7th digit ### 15th Example to Capacitance tolerance 17th digit VY1 471 Series Capacitance value ± 20 % = M Lead configuration M 29 Tolerance Size code code Available configurations see below Y5U C Temperature coefficient Rated voltage Compact size Revision: 16-Feb-16 6 T Lead wire Packaging / diameter lead length 3 = bulk T = tape and reel U= ammopack V 0 Lead style Lead spacing L= straight V = inline kinked 0 = 10.0 X = 12.5 Document Number: 28555 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VY1 Compact Series www.vishay.com Vishay BCcomponents PACKAGING SIZE CODE BODY DIAMETER Dmax. (mm) BULK REEL AMMO 470 pF to 2700 pF 29 to 47 12.0 1000 500 750 3300 pF to 4700 pF 51 to 61 15.5 500 500 750 CAPACITANCE VALUE PACKAGING QUANTITIES Note • The capacitors are supplied in bulk packaging (cardboard boxes), in tape on reel or in ammopack STRAIGHT LEADS Tmax. Dmax. coating extension e 3.0 max. 30 mm to 3.0 mm (ΔR) F d = 0.6 mm P D P2 ΔP ΔP Δh T Δh H1 F Ød W2 L H0 W1 W0 W L1 P0 P1 F A D0 t1 t detail A The sprocket hole pitch (P0) is 12.7 mm for lead spacing 10.0 mm and 12.5 mm Revision: 16-Feb-16 Document Number: 28555 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VY1 Compact Series www.vishay.com Vishay BCcomponents DIMENSIONS OF TAPE DIMENSIONS (mm) SYMBOL PARAMETER D (1) Body diameter 16.0 max. d Lead diameter 0.6 ± 0.05 P Pitch of component 25.4 ± 1 P0 (2) Pitch of sprocket hole 12.7 ± 0.3 P1 (3) Distance, hole center to lead 7.7 or 6.4 ± 1.0 P2 (3) Distance, hole to center of component 12.7 ± 1.5 F Lead spacing 10.0 or 12.5 + 0.6/- 0.4 ± 1.0 max. h Average deviation across tape P Average deviation in direction of reeling ± 1.0 max. W Carrier tape width 18.0 + 1/- 0.5 W0 Hold-down tape width 5.0 min. W1 Position of sprocket hole 9.0 + 0.75/- 0.5 W2 Distance of hold-down tape 3.0 max. H1 Maximum component height 40.0 H0 Height to seating plane (for kinked leads) 16.0 ± 0.5 H0 Height to seating plane (for straight leads) 20.0 ± 0.5 L Length of cut leads 11.0 max. L1 Length of lead protrusion 1.0 max. D0 Diameter of sprocket hole 4.0 ± 0.2 t Total tape thickness 0.9 max. t1 Total tape thickness with lead wire t+d Notes (1) See “Technical Data” table (2) Cumulative pitch error: ± 1 mm/20 pitches (3) Obliquity maximum 3° REEL AND TAPE DATA in millimeters 51 max. 355.6 ± 2.0 330 28 ± 1.5 8.0 45 max. 360 55 Reel with capacitors on tape Revision: 16-Feb-16 Ammopack with capacitors on tape Document Number: 28555 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VY1 Compact Series www.vishay.com Vishay BCcomponents APPROVALS IEC 60384-14.4 - Safety tests This approval together with CB test certificate substitutes all national approvals. CB Certificate Y1-capacitor: CB test certificate: US-26561-UL 470 pF to 4.7 nF 500 VAC X1-capacitor: CB test certificate: US-26561-UL 470 pF to 4.7 nF 760 VAC VDE Y1-capacitor: VDE marks approval: 40012673 470 pF to 4.7 nF 500 VAC X1-capacitor: VDE marks approval: 40012673 470 pF to 4.7 nF 760 VAC DIN EN 60384-14 VDE 0565-1-1:2006-04 - Safety tests Underwriters Laboratories Inc./Canadian Standards Association Y1-capacitor: CSA test certificate: E183844 470 pF to 4.7 nF 500 VAC X1-capacitor: CSA test certificate: E183844 470 pF to 4.7 nF 760 VAC UL 60384-14, CSA E60384-1:03, CSA E60384-14:09 Fixed capacitors for electromagnetic interference suppression and connection to the supply mains. CQC Y1-capacitor: CQC test certificate: CQC05001015032 470 pF to 4.7 nF 500 VAC X1-capacitor: CQC test certificate: CQC05001015032 470 pF to 4.7 nF 760 VAC MARKING Sample (2 sides) 10 VY1 472 M Y1 500 ~ X1 760 ~ xxxx 4 digit date code (year/week; add suffix “C” for compact series) Revision: 16-Feb-16 Document Number: 28555 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VY1 Compact Series www.vishay.com Vishay BCcomponents PERFORMANCE TEST TEST CONDITION TEST LIMITS Visual and mechanical inspection Optical inspection, dimensions measured with caliper No visible damage, marking legible Capacitance (C) 25 °C ± 3 °C , relative humidity (RH) 75 %, 1.0 VRMS ± 0.2 VRMS at 1 kHz Capacitance within specified tolerance 10 000 M min. Dissipation factor (DF) DF 2.5 % Insulation resistance (IR) Measured within 60 s ± 5 s after charging at 500 VDC Dielectric strength 4000 VAC at 50 Hz/60 Hz for 1 min, 50 mA max. No failure Temperature characteristic RH 75 %, 1.0 VRMS ± 0.2 VRMS at 1 kHz +22 % / -56 % Impulse voltage Pulse voltage: 10 kV Pulses per polarity: 10 Polarity: ± (both) Time between pulses of same polarity: 20 s Time between pulses of different polarity: 30 s No failure Life test 1000 h at 125 °C ± 2 °C, 850 VAC / 50 Hz; once every hour 1000 VAC for 0.1 s External appearance: no visible damage C/C ± 15 % DF 5 % IR 3000 M Dielectric strength: no failure Humidity test 500 h at 500 VAC, 50 Hz and 500 h unloaded 40 °C, RH = 90 % to 95% External appearance: no visible damage C/C ± 15 % DF 5 % IR 3000 M Dielectric strength: no failure Robustness of termination Pull test: 0.5 kg tensile weight in radial direction for 10 s ± 1 s Bending strength: capacitor body rotated by 90° in both directions No damage to capacitor body and lead wire Soldering effect Immersion of lead wires into 260 °C ± 5 °C solder for 10 s ± 2 s; min. distance from body: 1.5 mm Hand soldering at 400 °C ± 10 °C for 3 s to 4 s; min. distance from body: 1.5 mm External appearance: no visible damage C/C ± 10 % Dielectric strength: no failure Vibration test Resin (adhesive) External appearance: no visible damage Capacitance within specified tolerance DF 2.5 % IR 10 000 G Solder the capacitor onto test jig (glass epoxy body) and use resin (adhesive) to stick the body to the test jig. The capacitor must be soldered firmly to the supporting lead wire. Vibration change from 10 Hz to 2000 Hz and back to 10 Hz; Total amplitude: 1.5 mm; Acceleration: 100 m/s2; Sweep rate: 1 oct/min, each axis 2 h (6 h in total) Revision: 16-Feb-16 Document Number: 28555 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VY1 Compact Series www.vishay.com Vishay BCcomponents LEAKAGE CURRENT VS. VOLTAGE (Typical) Leakage Current (µA) RMS 4000 3500 4700 pF 3000 3300 pF 2500 2200 pF 2000 1500 pF 1500 1000 pF 1000 680 pF 500 470 pF 0 0 500 1000 1500 2000 2500 3000 3500 4000 AC Voltage (V) RMS IMPEDANCE VS. FREQUENCY (Typical) Impedance (Ω) 100 Lead configuration: - Length = 30 mm - Lead spacing: Standard - Lead diameter: Standard - Inline crimp 10 1.0 nF 1 0.68 nF 2.2 nF 4.7 nF 0.1 1 10 Frequency (MHz) 100 Note • The capacitors meet the essential requirements of “EIA 198”. Unless stated otherwise all electrical values apply at an ambient temperature of 25 °C ± 3 °C, at normal atmospheric conditions. RELATED DOCUMENTS General Information www.vishay.com/doc?28536 CB Test Certificate www.vishay.com/doc?22249 VDE Marks Approval www.vishay.com/doc?22251 UL Test Certificate www.vishay.com/doc?22250 CQC Test Certificate www.vishay.com/doc?22248 SAMPLE KIT Part Number Link Revision: 16-Feb-16 VY11-KIT-CS www.vishay.com/doc?28556 Document Number: 28555 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000