VJ....W1BC High Q Dielectric www.vishay.com Vishay Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications FEATURES • Ultra stable class 1 dielectric • High Q and low ESR at high frequency • Four standard sizes • High capacitance per unit volume • Supplied in tape on reel • For high frequency applications • Ni-barrier with 100 % tin terminations • Dry sheet manufacturing technology • Noble Metal Electrode system (NME) • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Mobile telecommunication • WLAN • RF modules • Tuner ELECTRICAL SPECIFICATIONS Note • Electrical characteristics at 25 °C, 30 % to 70 % related humidity, unless otherwise specified Operating Temperature: - 55 °C to + 125 °C Aging Rate: 0 % maximum per decade Capacitance Range: 0.5 pF to 3300 pF Insulation Resistance (IR): after 120 s at UR (DC) 10 G or R x C 500 x F whichever is less Voltage Range: 16 VDC to 100 VDC Temperature Coefficient of Capacitance (TCC): ± 30 ppm/°C from - 55 °C to + 125 °C Dissipation Factor: Cap. < 30 pF: Q 400 + 20 C Cap. 30 pF: Q 1000 Dielectric Strength Test: This is the maximum voltage the capacitors are tested for 1 s to 5 s period and the charge/discharge current does not exceed 50 mA 100 VDC: DWV at 250 % of rated voltage Test Conditions for Capacitance and DF Measurement Cap. 1000 pF 1.0 VRMS ± 0.2 VRMS, 1 MHz ± 10 % Cap. > 1000 pF 1.0 VRMS ± 0.2 VRMS, 1 kHz ± 10 % Revision: 23-Jan-13 Document Number: 28534 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC High Q Dielectric www.vishay.com Vishay QUICK REFERENCE DATA DIELECTRIC CAPACITANCE MAXIMUM VOLTAGE (V) CASE MINIMUM MAXIMUM 0402 50 0.5 pF 470 pF 0603 100 0.5 pF 3.3 nF High Q Note • Detail ratings see selection chart ORDERING INFORMATION VJ0402 Q SIZE DIELECTRIC CODE 0402 0603 Q = High Q 101 CAPACITANCE F TOLERANCE Cap. value 5 pF Two significant B = ± 0.10 pF digits followed by C = ± 0.25 pF the number of 5 pF > Cap. value < 10 pF zeros: C = ± 0.25 pF 1R0 = 1.0 pF D = ± 0.50 pF 101 = 100 pF Cap. value 10 pF F=±1% G = ±2 % J = ±5 % X TERMINATION J VOLTAGE C PACKAGING X = Ni barrier 100 % tin termination J = 16 V X = 25 V A = 50 V B = 100 V C = 7" reel/ paper P = 13" reel/ paper W1BC PROCESS CODE FOR BASIC COMMODITY DIMENSIONS in inches (millimeters) W T MB MB L Revision: 23-Jan-13 SIZE CODE L W T MAX. MB 0402 (1005) 0.040 ± 0.002 (1.00 ± 0.05) 0.020 ± 0.002 (0.50 ± 0.05) 0.022 (0.55) 0.010 + 0.002/- 0.004 (0.25 + 0.05/- 0.10) 0603 (1608) 0.063 + 0.006/- 0.004 (1.60 + 0.15/- 0.10) 0.030 + 0.006/- 0.004 (0.80 + 0.15/- 0.10) 0.038 (0.95) 0.016 ± 0.006 (0.40 ± 0.15) Document Number: 28534 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC High Q Dielectric www.vishay.com Vishay SELECTION CHART DIELECTRIC STYLE SIZE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE 0R5 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 472 562 682 822 103 HIGH Q VJ0402 0402 CAP. 0.5 pF 1.0 pF 1.2 pF 1.5 pF 1.8 pF 2.2 pF 2.7 pF 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.2 pF 10 pF 12 pF 15 pF 18 pF 22 pF 27 pF 33 pF 39 pF 47 pF 56 pF 68 pF 82 pF 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1000 pF 1200 pF 1500 pF 1800 pF 2200 pF 2700 pF 3300 pF 4700 pF 5600 pF 6800 pF 8200 pF 10 000 pF VJ0603 0603 16 V J 25 V X 50 V A N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N 100 V B 16 V J 25 V X 50 V A 100 V B S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X Note • Letters indicate product thickness, see packaging quantities Revision: 23-Jan-13 Document Number: 28534 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC High Q Dielectric www.vishay.com Vishay PACKAGING QUANTITIES PAPER TAPE SIZE CODE (inch/mm) MAX. THICKNESS (mm) THICKNESS SYMBOL 0402 (1002) 0.55 0603 (1608) 0.95 PAPER TAPE SPECIFICATION 7" REEL (C) 13" REEL (P) N 10K 20K S, X 4K 15K DIMENSIONS OF PAPER TAPE in millimeters P0 D0 SYM. P2 E F W B0 A0 P1 REEL SPECIFICATIONS PRODUCT SIZE CODE 0402 0603 A0 0.62 ± 0.05 1.02 ± 0.05 B0 1.12 ± 0.05 1.80 ± 0.05 W 8.00 ± 0.10 8.00 ± 0.10 E 1.75 ± 0.05 1.75 ± 0.05 F 3.50 ± 0.05 3.50 ± 0.05 D0 1.55 ± 0.05 1.55 ± 0.05 P0 4.00 ± 0.10 4.00 ± 0.10 P1 2.00 ± 0.05 4.00 ± 0.10 P2 2.00 ± 0.05 2.00 ± 0.05 REEL DIMENSIONS AND TAPE WIDTH in millimeters D C A Ø 180 mm; 7" Ø 330 mm; 13" A 13.0 ± 0.5 13.0 ± 0.5 B 9.0 ± 1.0 9.0 ± 1.0 C 178.0 ± 1.0 330.0 ± 1.0 D 60.0 ± 1.0 100.0 ± 1.0 B Revision: 23-Jan-13 Document Number: 28534 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC High Q Dielectric www.vishay.com Vishay TYPICAL ELECTRICAL CHARACTERISTICS Q VALUE CRITERIA VS. SPECIFIC FREQUENCY SIZE 0603 Q VALUE CRITERIA VS. SPECIFIC FREQUENCY SIZE 0402 10 000 10 000 1 GHz 500 MHz 1 GHz 100 MHz Q Q 100 10 100 10 minimum (solid line) typical (broken line) 1 0.1 10 1 CAPACITANCE (pF) minimum (solid line) typical (broken line) 1 0.1 100 1 10 1 TYPICAL ESR VS. FREQUENCY SIZE 0603 10 10 pF 0.1 1 pF 1 ESR (Ω) 1pF 100 pF 5 pF 4.7 pF 10 pF 0.1 0.01 100 100 000 100 CAPACITANCE (pF) TYPICAL ESR VS. FREQUENCY SIZE 0402 68 pF 0.01 100 10 000 1000 FREQUENCY (MHz) TYPICAL IMPEDANCE VS. FREQUENCY SIZE 0402 1000 FREQUENCY (MHz) 10 000 TYPICAL IMPEDANCE VS. FREQUENCY SIZE 0603 100 000 10 000 10 000 1000 IMPEDANCE (Ω) IMPEDANCE (Ω) 100 MHz 1000 1000 ESR (Ω) 500 MHz 1 pF 100 4.7 pF 10 1 1 pF 100 100 1 10 pF 100 pF 1000 68 pF 0.1 0.1 10 100 1000 10 10 000 100 1000 FREQUENCY (MHz) FREQUENCY (MHz) SERIES RESONANT FREQUENCY (MHz) 4.7 pF 10 pF 10 000 SRF VS. CAPACITANCE 10 000 Revision: 23-Jan-13 0402 1000 0603 100 1 10 100 CAPACITANCE (pF) Document Number: 28534 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC High Q Dielectric www.vishay.com Vishay CONSTRUCTION NO. NAME HIGH Q 1 Ceramic material BaTiO3 based 2 Inner electrode AgPd alloy 3 4 Termination 5 Inner layer Ag Middle layer Ni Outer layer Sn (matt) 3 4 5 1 2 STORAGE AND HANDLING CONDITIONS (1) To store products at 5 °C to 40 °C ambient temperature and 20 % to 70 % related humidity conditions. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. Do not store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which easily be resulted in poor soldering. b. To store products on the shelf and avoid exposure to moisture. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 23-Jan-13 Document Number: 28534 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000