VJ....W1BC Ultra High Q/Low ESR www.vishay.com Vishay Surface Mount Multilayer Ceramic Chip Capacitors for Ultra High Q Commodity Applications FEATURES • Ultra stable class 1 dielectric • Ultra High Q and low ESR at high frequency • Four standard sizes • High SRF characteristic • Ultra low capacitance to 0.1 pF • High precision capacitance tolerance ± 0.05 pF • Supplied in tape on reel • Ni-barrier with 100 % tin terminations • Dry sheet manufacturing technology • Base Metal Electrode system (BME) • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Mobile telecommunication • WLAN • RF modules • Tuner ELECTRICAL SPECIFICATIONS Note • Electrical characteristics at 25 °C, 30 % to 70 % related humidity, unless otherwise specified Operating Temperature: - 55 °C to + 125 °C Aging Rate: 0 % maximum per decade Capacitance Range: 0.1 pF to 100 pF Insulation Resistance (IR): after 120 s at UR (DC) Voltage Range: 10 VDC to 250 VDC Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C 0201: 22 pF: 0 ppm/°C ± 60 ppm/°C from - 55 °C to + 125 °C Dissipation Factor: Cap < 30 pF: Q 400 + 20 C Cap 30 pF: Q 1000 10 G or R x C 500 x F whichever is less Dielectric Strength Test: This is the maximum voltage the capacitors are tested for 1 s to 5 s period and the charge/discharge current does not exceed 50 mA 100 VDC: DWV at 250 % of rated voltage 250 VDC: DWV at 200 % of rated voltage Test Conditions for Capacitance and DF Measurement: Cap. 1000 pF 1.0 VRMS ± 0.2 VRMS, 1 MHz ± 10 % Cap. > 1000 pF 1.0 VRMS ± 0.2 VRMS, 1 kHz ± 10 % Revision: 23-Jan-13 Document Number: 28547 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Ultra High Q/Low ESR www.vishay.com Vishay QUICK REFERENCE DATA DIELECTRIC CAPACITANCE MAXIMUM VOLTAGE (V) MINIMUM MAXIMUM 0201 25 0.1 pF 33 pF 0402 100 0.1 pF 22 pF 0603 250 0.3 pF 47 pF 0805 250 0.3 pF 100 pF CASE Ultra High Q Note • Detail ratings see “Selection Chart” ORDERING INFORMATION VJ0402 L 100 F X A C W1BC SIZE CODE DIELECTRIC CAPACITANCE TOLERANCE (1) TERMINATION VOLTAGE PACKAGING PROCESS CODE FOR BASIC COMMODITY 0201 0402 0603 0805 L = Ultra High Q Expressed in pF two significant digits followed by the number of zeros: 0R3 = 0.3 pF 1R0 = 1.0 pF 150 = 15 pF Cap. value 5 pF V = ± 0.05 pF B = ± 0.10 pF C = ± 0.25 pF D = ± 0.50 pF 5 pF > Cap. value < 10 pF B = ± 0.10 pF C = ± 0.25 pF D = ± 0.50 pF Cap. value 10 pF F=±1% G=±2% J=±5% X = Ni barrier 100 % tin termination Q = 10 V X = 25 V A = 50 V B = 100 V P = 250 V C = 7" reel/ paper tape P = 13" reel/ paper tape Note (1) Details see “Selection Chart” DIMENSIONS in inches [millimeters] SIZE CODE W T MB MB L Revision: 23-Jan-13 L W T MAX. MB 0201 (0603) 0.024 ± 0.0012 0.012 ± 0.0012 (0.60 ± 0.03) (0.30 ± 0.03) 0.013 (0.33) 0.006 ± 0.002 (0.15 ± 0.05) 0402 (1005) 0.040 ± 0.002 (1.00 ± 0.05) 0.020 ± 0.002 (0.50 ± 0.05) 0.022 (0.55) 0.010 + 0.002/- 0.004 (0.25 + 0.05/- 0.10) 0603 (1608) 0.063 ± 0.004 (1.60 ± 0.10) 0.030 ± 0.004 (0.80 ± 0.10) 0.035 (0.87) 0.015 ± 0.006 (0.40 ± 0.15) 0805 (2012) 0.080 ± 0.008 (2.00 ± 0.20) 0.050 ± 0.008 (1.25 ± 0.20) 0.038 (0.95) 0.020 ± 0.008 (0.50 ± 0.20) Document Number: 28547 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Ultra High Q/Low ESR www.vishay.com Vishay SELECTION CHART DIELECTRIC ULTRA HIGH Q STYLE VJ0201 VJ0402 VJ0603 0201 0402 0603 SIZE CODE VOLTAGE VDC VOLTAGE CODE CAP. CODE VJ0805 0805 10 V 25 V 50 V 100 V 50 V 100 V 250 V 50 V 100 V 250 V Q X A B A B P A B P TOLERANCE CAP. 0R1 0.1 pF L L N N B 0R2 0.2 pF L L N N V, B 0R3 0.3 pF L L N N S S S T T T 0R4 0.4 pF L L N N S S S T T T V, B 0R5 0.5 pF L L N N S S S T T T V, B, C 0R6 0.6 pF L L N N S S S T T T V, B, C 0R7 0.7 pF L L N N S S S T T T V, B, C 0R8 0.8 pF L L N N S S S T T T V, B, C 0R9 0.9 pF L L N N S S S T T T V, B, C 1R0 1.0 pF L L N N S S S T T T V, B, C 1R2 1.2 pF L L N N S S S T T T V, B, C 1R5 1.5 pF L L N N S S S T T T V, B, C 1R8 1.8 pF L L N N S S S T T T V, B, C 2R2 2.2 pF L L N N S S S T T T V, B, C 2R4 2.4 pF 2R7 2.7 pF L L N N S S S T T T V, B, C 3R3 3.3 pF L L N N S S S T T T V, B, C 3R9 3.9 pF L L N N S S S T T T V, B, C 4R7 4.7 pF L L N N S S S T T T V, B, C 5R6 5.6 pF L L N N S S S T T T B, C, D 6R8 6.8 pF L L N N S S S T T T B, C, D 8R2 8.2pF L L N N S S S T T T B, C, D 100 10 pF L L N N S S S T T T F, G, J 110 11 pF L L N S S S T T T F, G, J 120 12 pF L L N S S S T T T F, G, J 130 13 pF L L N S S S T T T F, G, J 150 15 pF L L N S S S T T T F, G, J 160 16 pF L L N S S S T T T F, G, J 180 18 pF L L N S S S T T T F, G, J 200 20 pF L N S S S T T T F, G, J 220 22 pF L N S S S T T T F, G, J 240 24 pF L S S S T T T F, G, J 270 27 pF L S S S T T T F, G, J 300 30 pF L S S S T T T F, G, J 330 33 pF L S S S T T T F, G, J 360 36 pF S S S T T T F, G, J 390 39 pF S S S T T T F, G, J 430 43 pF S S S T T T F, G, J 470 47 pF S S S T T T F, G, J 560 56 pF T T T F, G, J 680 68 pF T T T F, G, J 820 82 pF T T T F, G, J 101 100 pF T T T F, G, J S V, B V, B, C Note • Letters indicate product thickness, see “Packaging Quantities” Revision: 23-Jan-13 Document Number: 28547 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Ultra High Q/Low ESR www.vishay.com Vishay PACKAGING QUANTITIES PAPER TAPE SIZE CODE (inch/mm) THICKNESS (mm) THICKNESS SYMBOL 7" REEL (C) 13" REEL (P) 0201 (0603) 0.30 ± 0.03 L 15K - 0402 (1002) 0.50 ± 0.05 N 10K 50K 0603 (1608) 0.80 ± 0.07 S 4K 15K 0805 (2012) 0.85 ± 0.10 T 4K 15K PAPER TAPE SPECIFICATION DIMENSIONS OF PAPER TAPE in millimeters P0 P2 D0 SYM. E F A0 W B0 A0 P1 PRODUCT SIZE CODE 0201 0402 0603 0805 0.37 ± 0.03 0.62 ± 0.05 1.02 ± 0.05 1.50 ± 0.10 B0 0.67 ± 0.03 1.12 ± 0.05 1.82 ± 0.05 2.30 ± 0.10 W 8.00 ± 0.10 8.00 ± 0.10 8.00 ± 0.10 8.00 ± 0.10 E 1.75 ± 0.05 1.75 ± 0.05 1.75 ± 0.05 1.75 ± 0.05 F 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 D0 1.55 ± 0.05 1.55 ± 0.05 1.55 ± 0.05 1.55 ± 0.05 P0 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 P1 2.00 ± 0.05 2.00 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 P2 2.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05 REEL SPECIFICATIONS REEL DIMENSIONS AND TAPE WIDTH in millimeters SYM. A D C A Ø 180 mm; 7" Ø 330 mm; 13" 13.0 ± 0.5 13.0 ± 0.5 B 9.0 ± 1.0 9.0 ± 1.0 C 178.0 ± 1.0 330.0 ± 1.0 D 60.0 ± 1.0 100.0 ± 1.0 B Revision: 23-Jan-13 Document Number: 28547 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Ultra High Q/Low ESR www.vishay.com Vishay ELECTRICAL CHARACTERISTICS TYPICAL Q VALUE VS.FREQUENCY SIZE 0402 TYPICAL Q VALUE VS. FREQUENCY SIZE 0603, 250 V 10 000 10 000 1000 1000 100 Q Q 1 pF 6.8 pF 0.3 pF 3.3 pF 100 10 6.8 pF 1 100 10 1000 10 000 0 0.5 1 TYPICAL ESR VS. FREQUENCY SIZE 0402 10 1 pF 1.5 pF 3.3 pF 0.1 1 6.8 pF 2.5 3 3.5 3 3.5 0.3 pF 0.1 0.01 100 2 TYPICAL ESR VS. FREQUENCY SIZE 0603, 250 V ESR (Ω) ESR (Ω) 1 1.5 FREQUENCY (GHz) FREQUENCY (MHz) 3.3 pF 6.8 pF 0.01 1000 10 000 FREQUENCY (MHz) 0 0.5 1 1.5 2 2.5 FREQUENCY (GHz) TYPICAL IMPEDANCE VS. FREQUENCY SIZE 0402 100 000 IMPEDANCE (Ω) 10 000 1000 100 1 pF 1.5 pF 3.3 pF 10 6.8 pF 1 1 10 100 1000 10 000 FREQUENCY (MHz) Revision: 23-Jan-13 Document Number: 28547 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Ultra High Q/Low ESR www.vishay.com Vishay CONSTRUCTION NO. NAME ULTRA HIGH Q 1 Ceramic material BaTiO3 based 2 Inner electrode Cu 3 4 Termination 5 Inner layer Cu Middle layer Ni Outer layer Sn (matt) 3 4 5 1 2 STORAGE AND HANDLING CONDITIONS (1) To store products at 5 °C to 40 °C ambient temperature and 20 % to 70 % related humidity conditions. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. Do not store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which easily be resulted in poor soldering. b. To store products on the shelf and avoid exposure to moisture. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 23-Jan-13 Document Number: 28547 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000