Family data sheet

Product family datasheet
OPTOTRONIC
Constant current LED power supplies with 4DIM/DALI
Areas of application
_ Street and urban lighting
_ Industry
_ Suitable for outdoor applications in luminaires with IP >
54
_ Suitable for use in outdoor luminaires of protection class
I and II
__
Product benefits
_ 4DIM functionality in one device (StepDIM, AstroDIM, MainsDIM, DALI)
_ Very high efficiency and reliability
_ High surge protection: up to 10 kV (1 pulse) / 8 kV, in protection class I or II
_ Low luminous efficacy tolerance through low output current tolerance of ± 3 %
_ Great flexibility due to wide operating temperature range of -40…55 °C or 60 °C
_ Protection through double isolation between mains input and LED output
Product features
_ Available with different wattage: 40 W, 60 W, 90 W, 165 W
_ Input voltage: 120…277 V (40 W), 220…240 V (60 W, 90 W, 165 W)
_ Current output range: 70…1,050 mA
_ Flexible current setting with one additional wire (LEDset2)
_ AstroDIM for autonomous dimming with five independent levels (astro, time mode)
_ Allows for energy saving in twilight phases
_ MainsDIM function for dimming via reduction of line voltage amplitude
_ Isolated DALI interface for bidirectional telemanagement systems
_ Standby power consumption: < 0.5 W
_ Constant lumen function
_ Overtemperature protection via external NTC
June 17, 2016, 11:43:50
OPTOTRONIC
© 2016, OSRAM GmbH. All rights reserved.
Page 1 of 10
Product family datasheet
Technical data
Electrical data
__
Product description
Nominal
voltage
Input voltage
AC
Nominal
current
Mains
frequency
Nominal input voltage
(SD port)
OT 40/120…277/1A0 4DIMLT2 E
120…277 V
108…305 V 1)
0.20 A 2)
50…60 Hz
220…277 V 3)
OT 60/170…240/1A0 4DIMLT2 E
220…240 V
170…264 V 1)
0.30 A 13)
50…60 Hz
220…240 V 3)
OT 90/170…240/1A0 4DIMLT2 E
220…240 V
170…264 V
1)
13)
50…60 Hz
220…240 V 3)
OT 165/170…240/1A0 4DIMLT2 E
220…240 V
170…264 V 1)
0.78 A 13)
50…60 Hz
220…240 V 3)
Product description
Power factor λ
OT 40/120…277/1A0 4DIMLT2 E
0.95/0.90
4)
OT 60/170…240/1A0 4DIMLT2 E
0.95/0.90
4)
OT 90/170…240/1A0 4DIMLT2 E
0.95/0.90
OT 165/170…240/1A0 4DIMLT2 E
0.95/0.90
Product description
Max. ECG no. on circuit
breaker 25 A (B)
OT 40/120…277/1A0 4DIMLT2 E
28
OT 60/170…240/1A0 4DIMLT2 E
0.46 A
Total
harmonic
distortion
Device
power loss
Inrush
current
Max. ECG no.
on circuit
breaker 10 A
(B)
10 %
6.5 W 5)
45 A 6)
10
10 %
7.4 W
5)
4)
10 %
4)
10 %
17
7)
7
7)
12
7)
57 A 17)
7
7)
12
7)
62 A 19)
4
7)
8
14)
9.6 W 5)
13 W 5)
53 A
7)
Max. ECG no.
on circuit
breaker 16 A
(B)
7)
Max. no. of
ECGs on
16A MCB
with EBNOS
Surge capability (L/NGround)
Surge
capability (LN)
7)
45
8 kV 8)
6 kV 9)
20
7)
30
8 kV 8)
6 kV 9)
OT 90/170…240/1A0 4DIMLT2 E
20
7)
30
8 kV
8)
6 kV 9)
OT 165/170…240/1A0 4DIMLT2 E
14
7)
15
8 kV 20)
Product description
Surge capability (L/N –
SD)
Surge capability (SD –
Ground)
Nominal
output
power
ECG
efficiency
OT 40/120…277/1A0 4DIMLT2 E
6 kV 9)
8 kV 8)
40 W 10)
88.5 % 11)
OT 60/170…240/1A0 4DIMLT2 E
6 kV 9)
8 kV 8)
60 W 15)
90.5 % 11)
OT 90/170…240/1A0 4DIMLT2 E
6 kV
9)
8)
18)
91.5 % 11)
OT 165/170…240/1A0 4DIMLT2 E
6 kV 9)
Product description
Nominal output
voltage
U-OUT
(working
voltage)
Nominal
output current
Output
current
tolerance
Output ripple current
(100 Hz)
OT 40/120…277/1A0 4DIMLT2 E
18…56 V
60 V
350…1050 mA
±3 %
15 %
OT 60/170…240/1A0 4DIMLT2 E
30…115 V 16)
120 V
350…1050 mA
±3 %
15 %
OT 90/170…240/1A0 4DIMLT2 E
57…186 V
200 V
350…1050 mA
±3 %
15 %
OT 165/170…240/1A0 4DIMLT2 E
90…285 V 23)
300 V
350…1050 mA
±3 %
15 %
Product description
Minimum output current
Galvanic isolation
OT 40/120…277/1A0 4DIMLT2 E
70 mA 12)
SELV equivalent
OT 60/170…240/1A0 4DIMLT2 E
70 mA
12)
OT 90/170…240/1A0 4DIMLT2 E
70 mA 12)
OT 165/170…240/1A0 4DIMLT2 E
June 17, 2016, 11:43:50
OPTOTRONIC
8 kV
6 kV 9)
90 W
8 kV 21)
120 mA
12)
165 W 22)
92 % 11)
SELV
double/reinforced
double/reinforced
© 2016, OSRAM GmbH. All rights reserved.
Page 2 of 10
Product family datasheet
1) Permitted voltage range
2) At 230 V/0.41 A for 120 V
3) In relation to N
AC
4) Minimum/Full load at 230 V/Half load at 230 V
5) Maximum
6) t
width
7) Type B
= 180 µs (measured at 50 % I
)
peak
8) EQUI @ 12 Ohm acc. to EN 61547
9) @ 2 Ohm, acc. to EN61547
10) Partial load 7…40 W
11) At full load and 230 V
12) Physical Minimum Dimming Current 70 mA
13) At 230 V
14) t
= 200 µs (measured at 50 % I
)
width
peak
15) Partial load 11…60 W
17) t
= 210 µs (measured at 50 % I
)
width
peak
16) 35…115 V for output current >700 mA
19) t
= 330 µs (measured at 50 % I
)
width
peak
18) Partial load 20…90 W
21) Functional earth @ 12 Ohm acc. to EN61547
20) Functional Earth @ 12 Ohm acc. to EN61547
23) 90…242 V for output current >680 mA
22) Partial load 32…165 W
__
Dimensions & weight
Product description
Length
Width
Height
Mounting
hole
spacing,
length
Mounting
hole
spacing,
width
Product
weight
OT 40/120…277/1A0 4DIMLT2 E
123.0 mm
79.0 mm
33.0 mm
111.0 mm
67.0 mm
260.00 g
OT 60/170…240/1A0 4DIMLT2 E
133.0 mm
77.0 mm
40.0 mm
122.5 mm
-
280.00 g
OT 90/170…240/1A0 4DIMLT2 E
133.0 mm
77.0 mm
40.0 mm
122.5 mm
-
340.00 g
OT 165/170…240/1A0 4DIMLT2 E
170.0 mm
100.0 mm
40.0 mm
160.0 mm
90.0 mm
1100.00 g
Product description
Cable crosssection, input
side
OT 40/120…277/1A0 4DIMLT2 E
0.2…1.5 mm² 1)
1)
OT 60/170…240/1A0 4DIMLT2 E
0.25…2.5 mm²
OT 90/170…240/1A0 4DIMLT2 E
0.25…2.5 mm² 1)
OT 165/170…240/1A0 4DIMLT2 E
0.25…2.5 mm²
1)
Cable crosssection, output
side
Wire preparation
length, input side
0.2…1.5 mm² 1)
8.5…9.5 mm
0.2…1.5 mm²
1)
0.25…1.5 mm² 1)
0.2…1.5 mm²
1)
10…11 mm 2)
10…11 mm 2)
10…11 mm 2)
1) Flexible
2) Equipotential pole 8.5…9.5
June 17, 2016, 11:43:50
OPTOTRONIC
© 2016, OSRAM GmbH. All rights reserved.
Page 3 of 10
Product family datasheet
Product line drawing
OT 40/120…277/1A0 4DIMLT2 E
OT 60/170…240/1A0 4DIMLT2 E
OT 90/170…240/1A0 4DIMLT2 E
OT 165/170…240/1A0 4DIMLT2 E
__
June 17, 2016, 11:43:50
OPTOTRONIC
© 2016, OSRAM GmbH. All rights reserved.
Page 4 of 10
Product family datasheet
Temperatures & operating conditions
Product description
Ambient
temperature range
Maximum
temperature at tc
test point
Max.housing
temperature in case
of fault
Permitted rel. humidity
during operation
OT 40/120…277/1A0 4DIMLT2 E
-40…+60 °C 1)
80 °C 2)
120 °C
5…85 % 3)
OT 60/170…240/1A0 4DIMLT2 E
-40…+60 °C 4)
85 °C 2)
120 °C
5…85 % 3)
2)
120 °C
5…85 % 3)
120 °C
5…85 % 3)
OT 90/170…240/1A0 4DIMLT2 E
-40…+55 °C
90 °C
OT 165/170…240/1A0 4DIMLT2 E
-40…+55 °C
85 °C 2)
1) T (max) = 55 °C for input voltage 120/277 V
a
AC
2) Maximum at the Tc-point
3) Non condensing, absolute humidity: 36g/m³
4) T (max) = 60°C I
≤ 700mA, T (max) = 55°C I >700mA
a
out
a
out
Lifespan
__
Product description
ECG lifetime
OT 40/120…277/1A0 4DIMLT2 E
85000 h 1)
OT 60/170…240/1A0 4DIMLT2 E
85000 h 2)
OT 90/170…240/1A0 4DIMLT2 E
85000 h 3)
OT 165/170…240/1A0 4DIMLT2 E
85000 h 3)
1) At T
= 70°C at T point / 10% failure rate
c
= 75°C at T point / 10% failure rate
case
c
3) At T
= 80°C at T point / 10% failure rate
case
c
case
2) At T
Expected Lifetime
Product name
OT 40/120…277/1A0
4DIMLT2 E
ECG ambient temperature [ta]
60
50
47
Temperature at tc-point [°C]
80
70
67
50000 1)
85000 1)
100000 1)
ECG ambient temperature [ta]
60
50
47
Temperature at tc-point [°C]
85
75
72
50000 2)
85000 2)
100000 2)
ECG ambient temperature [ta]
55
45
42
Temperature at tc-point [°C]
90
80
77
3)
3)
100000 3)
Lifetime [h]
OT 60/170…240/1A0
4DIMLT2 E
Lifetime [h]
OT 90/170…240/1A0
4DIMLT2 E
Lifetime [h]
OT
165/170…240/1A0
4DIMLT2 E
June 17, 2016, 11:43:50
OPTOTRONIC
50000
85000
ECG ambient temperature [ta]
55
45
43
Temperature at tc-point [°C]
85
75
72
4)
4)
100000 4)
Lifetime [h]
50000
85000
© 2016, OSRAM GmbH. All rights reserved.
Page 5 of 10
Product family datasheet
1) Max. 10% failure rate at tc max and input voltage 230 V
AC
2) Max. 10% failure rate at tc max and input voltage 230 V
AC
3) Max. 10% failure rate at tc max and input voltage 230 V
AC
4) Max. 10% failure rate at tc max and input voltage 230 V
AC
Capabilities
Product description
Dimmable
Dimming interface
Dimming range
Suitable for fixtures
with prot. class
OT 40/120…277/1A0 4DIMLT2 E
Yes
4DIM / DALI / StepDIM /
AstroDIM / MainsDIM
10…100 % 1)
I / II
OT 60/170…240/1A0 4DIMLT2 E
Yes
4DIM / DALI / StepDIM /
AstroDIM / MainsDIM
10…100 % 1)
I / II
OT 90/170…240/1A0 4DIMLT2 E
Yes
4DIM / DALI / StepDIM /
AstroDIM / MainsDIM
10…100 % 1)
I / II
OT 165/170…240/1A0 4DIMLT2 E
Yes
4DIM / DALI / StepDIM /
AstroDIM / MainsDIM
17…100 % 1)
I / II
Product description
Constant lumen function
NTC input
OT 40/120…277/1A0 4DIMLT2 E
Programmable
Yes
2)
Automatic reversible
Yes
2)
Automatic reversible
Automatic reversible
Automatic reversible
OT 60/170…240/1A0 4DIMLT2 E
__
Programmable
Overheating protection
OT 90/170…240/1A0 4DIMLT2 E
Programmable
Yes
2)
OT 165/170…240/1A0 4DIMLT2 E
Programmable
Yes
2)
Product description
Overload protection
Short-circuit protection
No-load
proof
Max. cable
length to
lamp/LED
module
OT 40/120…277/1A0 4DIMLT2 E
Automatic reversible
Automatic reversible
Yes
2.0 m
OT 60/170…240/1A0 4DIMLT2 E
Automatic reversible
Automatic reversible
Yes
2.0 m
OT 90/170…240/1A0 4DIMLT2 E
Automatic reversible
Automatic reversible
Yes
2.0 m
OT 165/170…240/1A0 4DIMLT2 E
Automatic reversible
Automatic reversible
Yes
2.0 m
1) For ≥700mA nominal output current
2) Supports 15K, 5 %, NCP18XW153J03RB
June 17, 2016, 11:43:50
OPTOTRONIC
© 2016, OSRAM GmbH. All rights reserved.
Page 6 of 10
Product family datasheet
Certificates & standards
__
Product description
Type of
protection
Standards
OT 40/120…277/1A0 4DIMLT2 E
IP20
1)
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN
55015:2006 + A1:2007 + A2:2009/Acc. to EN 61547/Acc. to FCC 47 part
15 class B/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC
62386-101/Acc. to IEC 62386-102/Acc. to IEC 62386-207/UL-8750
OT 60/170…240/1A0 4DIMLT2 E
IP20
1)
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN
55015:2006 + A1:2007 + A2:2009/Acc. to EN 61547/Acc. to IEC 61000-32/Acc. to IEC 61000-3-3/Acc. to IEC 62386-101/Acc. to IEC 62386102/Acc. to IEC 62386-207
OT 90/170…240/1A0 4DIMLT2 E
IP20
1)
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN
55015:2006 + A1:2007 + A2:2009/Acc. to EN 61547/Acc. to IEC 61000-32/Acc. to IEC 61000-3-3/Acc. to IEC 62386-101/Acc. to IEC 62386102/Acc. to IEC 62386-207
OT 165/170…240/1A0 4DIMLT2 E
IP20
1)
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN
55015:2006 + A1:2007 + A2:2009/Acc. to EN 61547/Acc. to IEC 61000-32/Acc. to IEC 61000-3-3/Acc. to IEC 62386-101/Acc. to IEC 62386102/Acc. to IEC 62386-207
Product description
Approval marks – approval
OT 40/120…277/1A0 4DIMLT2 E
CE / ENEC 10 / UR / VDE / VDE-EMC / CQC
(in preparation)
OT 60/170…240/1A0 4DIMLT2 E
CE / ENEC 10 / VDE / VDE-EMC / CQC (in
preparation)
OT 90/170…240/1A0 4DIMLT2 E
CE / ENEC 10 / VDE / VDE-EMC / CQC (in
preparation)
OT 165/170…240/1A0 4DIMLT2 E
CE / ENEC 10 / VDE / VDE-EMC (in
preparation) / CQC (in preparation)
1) IP Fixture rating > IP54
Logistical data
Product description
Temperature
range at
storage
OT 40/120…277/1A0 4DIMLT2 E
-25…80 °C
OT 60/170…240/1A0 4DIMLT2 E
-25…80 °C
OT 90/170…240/1A0 4DIMLT2 E
-25…80 °C
OT 165/170…240/1A0 4DIMLT2 E
-25…80 °C
June 17, 2016, 11:43:50
OPTOTRONIC
© 2016, OSRAM GmbH. All rights reserved.
Page 7 of 10
Product family datasheet
Wiring Diagram
__
OT 40/120…277/1A0 4DIMLT2 E, OT 60/170…240/1A0
4DIMLT2 E, OT 90/170…240/1A0 4DIMLT2 E, OT
165/170…240/1A0 4DIMLT2 E
OT 40/120…277/1A0 4DIMLT2 E, OT 60/170…240/1A0
4DIMLT2 E, OT 90/170…240/1A0 4DIMLT2 E, OT
165/170…240/1A0 4DIMLT2 E
OT 40/120…277/1A0 4DIMLT2 E
June 17, 2016, 11:43:50
OPTOTRONIC
© 2016, OSRAM GmbH. All rights reserved.
Page 8 of 10
Product family datasheet
Equipment / Accessories
_ DALI magic hardware for configuring 4DIM ECGs necessary
_ Programmable via Tuner4TRONIC software
Application advice
For more detailed application information and graphics please see product datasheet.
Additional product information
_ Default output current is 700 mA without any resistor connected to the LEDset port. As soon as the driver detects one time a
__
resistor value within the resistor range of 2.37 kOhm (1050 mA) and 24.9 kOhm (200 mA) for more than 3 s, the driver
activates the LEDset2 mode.
_ The driver withstands an input voltage of up to 350 Vac for a maximum of two hours. Shut down of output load might occur in
case the supply voltage exceeds the declared input voltage range.
_ Shut down of output load happens if the input voltage of the load is below the allowed minimum output voltage of the driver.
The driver automatically tries to switch on the load cyclically.
_ In case the input voltage of the load exceeds the output voltage range of the driver, it automatically reduces the output
current to keep the output voltage controlled to the maximum allowed output voltage.
_ The driver automatically reduces the output current in case the maximum allowed output power is exceeded.
_ The driver automatically adjusts the output voltage to the maximum output voltage if no load is connected and switches off
the load after some seconds. Hot-plug of the load or external switching on the secondary side is not allowed.
_ The driver is protected against temporary overheating by automatic reduction of the output current down to 30 % and then
switches off.
_ The EQUI pin shall be connected to the heat sink of the LED module to improve the surge withstand capability of the system
and EMI in critical luminaires.
_ Several external NTCs are supported for temperature protection of the LED module or luminaire. The type of NTC can be
selected in the programming software in the temperature based mode. By default the resistor based mode is actived with
following values: start derating: 6.3 kOhm, end derating 5.0 kOhm, shut off: 4.3 kOhm, derating level 50 %.
_ The default dimming mode is StepDIM / AstroDIM / DALI (wiring selection) with following values for:- StepDIM: 100 % on, 50
% dimming level if SD port is active, fade time 180 s- AstroDIM: 100 % on, 50 % dimming level, 6 h dimming duration, start of
dimming duration 2 h before the middle of the average switched-on time, fade time 180 s
_ The constant lumen feature is disabled by default.
_ For MainsDIM dimming mode and for 170 Vac input voltage condition the output power should not exceed 85 % of the
maximum declared output power.
_ For input voltage of 170…190 Vac, the maximum allowed output power is linear limited starting from 100 % at 190 Vac down
to 85 % at 170 Vac, except for the 40 W type.
_ If any output level is below the physical min level, the physical min level will be used.
_ In case the 3DIM and 4DIMLT2 devices are operated on one common control phase connected to SD input the 3DIM devices
needs to have a relay as described in the 3DIM application guide.
_ The SD port is suitable for three phase systems with 220…240 Vac, for other input voltages only single phase systems are
supported.
_ For further details please consult the 4DIMLT2 application guide.
Sales and Technical Support
Sales and Technical Support www.osram.com
June 17, 2016, 11:43:50
OPTOTRONIC
© 2016, OSRAM GmbH. All rights reserved.
Page 9 of 10
Product family datasheet
Download Data
File
Brochures
Technical Application Guide 4DIMLT2 LED drivers (GB)
Brochures
Overvoltage protection for LED street lighting (EN)
Declarations of conformity
UL-Certificate OT 40120-2771A0 4DIMLT2 E
Declarations of conformity
Synergrid Conformity 4DIMLT2
Declarations of conformity
EMC Certificate
Declarations of conformity
ENEC certificate
Declarations of conformity
Declaration of Conformity OT 4 DIM LT2 E
Certificates
CB certificate 40W 60W 90W 4DIM
Certificates
CB-Certificate-165W 4DIM
__
Logistical Data
Product code
Product description
Packaging unit (Pieces/Unit)
Dimensions (length x width x
height)
Volume
Gross weight
4052899925182
OT 40/120…277/1A0
4DIMLT2 E
Shipping carton box
20
418 mm x 255 mm x 82 mm
8.74 dm³
5624.00 g
4052899925199
OT 60/170…240/1A0
4DIMLT2 E
Shipping carton box
20
495 mm x 330 mm x 140 mm
22.87 dm³
6478.00 g
4052899925205
OT 90/170…240/1A0
4DIMLT2 E
Shipping carton box
20
495 mm x 330 mm x 140 mm
22.87 dm³
7523.00 g
4052899925212
OT 165/170…240/1A0
4DIMLT2 E
Shipping carton box
10
303 mm x 285 mm x 205 mm
17.70 dm³
11637.00 g
The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or
more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit.
Disclaimer
Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release.
June 17, 2016, 11:43:50
OPTOTRONIC
© 2016, OSRAM GmbH. All rights reserved.
Page 10 of 10