Product family datasheet OPTOTRONIC Constant current LED power supplies with 3DIM/DALI Areas of application _ Suitable for luminaires of protection classes I and II _ Suitable for outdoor applications in luminaires with IP > 54 __ Product benefits _ Large output power range: up to 150 W _ High surge protection: up to 4/6 kV (L-N), 4/6 kV (L/N-PE) _ Different dimming modes and levels can be set _ Stand-alone dimming function enables operation in existing installations Product features _ 3DIM functionality (StepDIM/AstroDIM/DALI) _ Current output range: 75…700 mA _ Flexible current setting _ Constant lumen function _ Overtemperature protection via external NTC (3DIMLT+ version only) June 17, 2016, 11:44:15 OPTOTRONIC © 2016, OSRAM GmbH. All rights reserved. Page 1 of 9 Product family datasheet Technical data Electrical data __ Product description Nominal voltage Input voltage AC Nominal current Mains frequency Nominal input voltage (SD port) OT 50/220…240/700 3DIMLT+ E 220…240 V 195…264 V 1) 0.28 A 2) 50…60 Hz 220…240 V 3) OT 90/220…240/700 3DIMLT+ E 220…240 V 195…264 V 1) 0.45 A 12) 50…60 Hz 220…240 V 3) OT 150/220…240/700 3DIMLT+ E 220…240 V 1) 50…60 Hz 220…240 V 3) Product description Power factor λ OT 50/220…240/700 3DIMLT+ E 0.95/0.90 OT 90/220…240/700 3DIMLT+ E 195…264 V 0.72 A 2) Total harmonic distortion Device power loss Inrush current Max. ECG no. on circuit breaker 10 A (B) 4) 15 % 8.0 W 5) 25 A 6) 9 7) 18 0.95/0.90 4) 10 % 10 W 5) 40 A 13) 6 7) 12 OT 150/220…240/700 3DIMLT+ E 0.95/0.90 4) 4 7) Product description Max. ECG no. on circuit breaker 25 A (B) OT 50/220…240/700 3DIMLT+ E 28 OT 90/220…240/700 3DIMLT+ E 10 % 15.0 W 5) 58 A 15) Max. ECG no. on circuit breaker 16 A (B) 8 7) 7) 7) Max. no. of ECGs on 16A MCB with EBNOS Surge capability (L/NGround) Surge capability (LN) 7) 28 4 kV 8) 4 kV 9) 20 7) 24 4 kV 8) 4 kV 9) OT 150/220…240/700 3DIMLT+ E 14 7) 20 8) 6 kV 9) Product description Surge capability (L/N – SD) Surge capability (SD – Ground) Nominal output power ECG efficiency OT 50/220…240/700 3DIMLT+ E 4 kV 9) 4 kV 8) 54 W 10) 88 % 11) OT 90/220…240/700 3DIMLT+ E 4 kV 9) 8) 14) 90 % 11) OT 150/220…240/700 3DIMLT+ E 4 kV 9) Product description Nominal output voltage U-OUT (working voltage) Nominal output current Output current tolerance Output ripple current (100 Hz) OT 50/220…240/700 3DIMLT+ E 30…120 V 120 V 350…700 mA ±5 % 15 % OT 90/220…240/700 3DIMLT+ E 64…245 V 260 V 350…700 mA ±5 % 15 % OT 150/220…240/700 3DIMLT+ E 95…335 V 350 V 350…700 mA ±5 % 15 % Product description Minimum output current Galvanic isolation OT 50/220…240/700 3DIMLT+ E 75 mA SELV equivalent OT 90/220…240/700 3DIMLT+ E 75 mA double/reinforced OT 150/220…240/700 3DIMLT+ E 75 mA double/reinforced 4 kV 6 kV 90 W 4 kV 8) 150 W 16) 90.5 % 11) 1) Permitted voltage range 2) At 230 V 3) In relation to L/N 4) Minimum/Full load at 230 V/Half load at 230 V 5) Maximum 6) t width = 250 µs (measured at 50 % I June 17, 2016, 11:44:15 OPTOTRONIC ) peak © 2016, OSRAM GmbH. All rights reserved. Page 2 of 9 Product family datasheet 7) Type B 8) EQUI @ 12 Ohm acc. to EN 61547 9) @ 2 Ohm, acc. to EN61547 10) Partial load 10…54 W 11) At full load and 230 V 12) Maximum at 230 V 13) t = 330 µs (measured at 50 % I ) width peak 14) Partial load 23…90 W 15) t = 360 µs (measured at 50 % I ) width peak 16) Partial load 34…150 W Dimensions & weight __ Product description Mounting hole spacing, length Mounting hole spacing, width Length Width Height Product weight OT 50/220…240/700 3DIMLT+ E 122.5 mm - 133.0 mm 77.0 mm 48.0 mm 725.00 g OT 90/220…240/700 3DIMLT+ E 122.5 mm - 133.0 mm 77.0 mm 48.0 mm 725.00 g OT 150/220…240/700 3DIMLT+ E 160.0 mm 90.0 mm 170.0 mm 100.0 mm 40.0 mm 1100.00 g Product description Cable crosssection, input side OT 50/220…240/700 3DIMLT+ E 0.25…2.5 mm² 1) 0.25…1.5 mm² 2) 10…11 mm 3) OT 90/220…240/700 3DIMLT+ E 0.25…2.5 mm² 1) 2) 10…11 mm 3) OT 150/220…240/700 3DIMLT+ E 0.25…2.5 mm² 1) 0.25…1.5 mm² 2) 10…11 mm 3) Cable crosssection, output side 0.25…1.5 mm² Wire preparation length, input side 1) Flexible 2) LEDset only 0.2…0.5 mm² 3) Equipotential pole 8.5…9.5 June 17, 2016, 11:44:15 OPTOTRONIC © 2016, OSRAM GmbH. All rights reserved. Page 3 of 9 Product family datasheet Product line drawing OT 50/220…240/700 3DIMLT+ E, OT 90/220…240/700 3DIMLT+ E, OT 150/220…240/700 3DIMLT+ E __ Temperatures & operating conditions Product description Ambient temperature range Maximum temperature at tc test point Max.housing temperature in case of fault Permitted rel. humidity during operation OT 50/220…240/700 3DIMLT+ E -30…+60 °C 85 °C 1) 110 °C 5…85 % 2) OT 90/220…240/700 3DIMLT+ E -30…+55 °C 90 °C 1) 110 °C 5…85 % 2) OT 150/220…240/700 3DIMLT+ E -30…+55 °C 85 °C 1) 120 °C 5…85 % 2) 1) Maximum at the Tc-point 2) Maximum 56 days/year at 85 % Lifespan Product description ECG lifetime OT 50/220…240/700 3DIMLT+ E 85000 h 1) OT 90/220…240/700 3DIMLT+ E 85000 h 2) OT 150/220…240/700 3DIMLT+ E 85000 h 1) 1) At T = 75°C at T point / 10% failure rate c = 80°C at T point / 10% failure rate case c case 2) At T June 17, 2016, 11:44:15 OPTOTRONIC © 2016, OSRAM GmbH. All rights reserved. Page 4 of 9 Product family datasheet Expected Lifetime Product name OT 50/220…240/700 3DIMLT+ E ECG ambient temperature [ta] 60 50 45 Temperature at tc-point [°C] 85 75 70 1) 1) 100000 1) Lifetime [h] OT 90/220…240/700 3DIMLT+ E 50000 ECG ambient temperature [ta] 55 45 40 Temperature at tc-point [°C] 90 80 75 2) 2) 100000 2) Lifetime [h] OT 150/220…240/700 3DIMLT+ E 85000 50000 85000 ECG ambient temperature [ta] 55 45 40 Temperature at tc-point [°C] 85 75 70 50000 3) 85000 3) 100000 3) Lifetime [h] 1) Max. 10% failure rate at tc max and input voltage 230 V AC 2) Max. 10% failure rate at tc max and input voltage 230 V AC 3) Max. 10% failure rate at tc max and input voltage 230 V AC __ Capabilities Product description Dimmable Dimming interface Dimming range Suitable for fixtures with prot. class OT 50/220…240/700 3DIMLT+ E No 3DIM / DALI / StepDIM / AstroDIM 10…100 % 1) I / II OT 90/220…240/700 3DIMLT+ E No 3DIM / DALI / StepDIM / AstroDIM 10…100 % 1) I / II OT 150/220…240/700 3DIMLT+ E No 3DIM / DALI / StepDIM / AstroDIM 10…100 % 1) I / II Product description Constant lumen function NTC input OT 50/220…240/700 3DIMLT+ E Programmable Yes 2) Automatic reversible Automatic reversible Automatic reversible Overheating protection OT 90/220…240/700 3DIMLT+ E Programmable Yes 2) OT 150/220…240/700 3DIMLT+ E Programmable Yes 2) Product description Overload protection Short-circuit protection No-load proof Max. cable length to lamp/LED module OT 50/220…240/700 3DIMLT+ E Automatic reversible Automatic reversible Yes 2.0 m OT 90/220…240/700 3DIMLT+ E Automatic reversible Automatic reversible Yes 2.0 m OT 150/220…240/700 3DIMLT+ E Automatic reversible Automatic reversible Yes 2.0 m 1) For 700mA nominal output current 2) Supports 10K, 5 %, NCP18XH103J03RB June 17, 2016, 11:44:15 OPTOTRONIC © 2016, OSRAM GmbH. All rights reserved. Page 5 of 9 Product family datasheet Certificates & standards Product description Type of protection Standards OT 50/220…240/700 3DIMLT+ E IP20 1) Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to EN 55015:2006 + A1:2007 + A2:2009/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547/Acc. to IEC 62386-101/Acc. to IEC 62386102/Acc. to IEC 62386-207 OT 90/220…240/700 3DIMLT+ E IP20 1) Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to EN 55015:2006 + A1:2007 + A2:2009/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to EN 61547/Acc. to IEC 62386-101/Acc. to IEC 62386102/Acc. to IEC 62386-207 OT 150/220…240/700 3DIMLT+ E IP20 1) Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to EN 55015:2006 + A1:2007 + A2:2009/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to EN 61547/Acc. to IEC 62386-101/Acc. to IEC 62386102/Acc. to IEC 62386-207 Product description Approval marks – approval OT 50/220…240/700 3DIMLT+ E CE / ENEC 10 / VDE OT 90/220…240/700 3DIMLT+ E CE / ENEC 10 / VDE OT 150/220…240/700 3DIMLT+ E CE / ENEC 10 / VDE 1) IP Fixture rating > IP54 Logistical data __ Product description Temperature range at storage OT 50/220…240/700 3DIMLT+ E -20…80 °C OT 90/220…240/700 3DIMLT+ E -25…80 °C OT 150/220…240/700 3DIMLT+ E -20…80 °C June 17, 2016, 11:44:15 OPTOTRONIC © 2016, OSRAM GmbH. All rights reserved. Page 6 of 9 Product family datasheet Wiring Diagram OT 50/220…240/700 3DIMLT+ E, OT 90/220…240/700 3DIMLT+ E, OT 150/220…240/700 3DIMLT+ E OT 50/220…240/700 3DIMLT+ E, OT 90/220…240/700 3DIMLT+ E, OT 150/220…240/700 3DIMLT+ E __ Equipment / Accessories _ DALI magic hardware for configuring 3DIM ECGs necessary Application advice For more detailed application information and graphics please see product datasheet. Additional product information _ Shut down of output load happens if the input voltage of the load is below the allowed minimum output voltage of the driver. The driver automatically tries to switch on the load cyclically. _ In case the input voltage of the load exceeds the output voltage range of the driver, it automatically reduces the output current to keep the output voltage controlled to the maximum allowed output voltage. _ The driver automatically reduces the output current in case the maximum allowed output power is exceeded. _ The EQUI pin shall be connected to the heat sink of the LED module to improve the surge withstand capability of the system and EMI in critical luminaires. _ Several external NTCs are supported for temperature protection of the LED module or luminaire. The type of NTC can be selected in the programming software in the temperature based mode. By default the resistor based mode is actived with following values: start derating: 6.3 kOhm, end derating 5.0 kOhm, shut off: 4.3 kOhm, derating level 50 %. _ The default dimming mode is StepDIM / AstroDIM / DALI (wiring selection) with following values for:- StepDIM: 100 % on, 50 % dimming level if SD port is active, fade time 180 s- AstroDIM: 100 % on, 50 % dimming level, 6 h dimming duration, start of dimming duration 2 h before the middle of the average switched-on time, fade time 180 s _ June 17, 2016, 11:44:15 OPTOTRONIC © 2016, OSRAM GmbH. All rights reserved. Page 7 of 9 Product family datasheet The constant lumen feature is disabled by default. _ If any output level is below the physical min level, the physical min level will be used. _ An external relay connected in front of the SD port is necessary in installations with leakage currents from N and L exceeding the defined limits per device (SD input current: active > 650 µAp and inactive < 12 µAp). The relay needs to be selected in a way that it is not switched or hold by the occurring leakage currents in the installation. This relay is also needed to ensure the compatibility with the new 4DIMLT2 OPTOTRONIC drivers. Sales and Technical Support Sales and Technical Support www.osram.com Download Data File Brochures APPLICATION GUIDE. The LEDset interface. (GB) Brochures LMS 3 DIM Flyer (GB) Brochures 3DIM - controll gears - Reliable, durable and efficient (G) Brochures 3DIM Application Guide (GB) Brochures Overvoltage protection for LED street lighting (EN) __ Declarations of conformity CE Conformity OT 50220-240700 3DIMLT+ E CAD data 3-dim CAD OT 50-90-3DIM LT Product movie 3DIM Astro, StepDIM, DALI Video Declarations of conformity CE Conformity OT 90220-240700 3DIMLT+ E Declarations of conformity CE Conformity OT 150220-240700 3DIMLT+ E CAD data 3-dim CAD OT 150-3DIM LT Logistical Data Product code Product description Packaging unit (Pieces/Unit) Dimensions (length x width x height) Volume Gross weight 4008321863539 OT 50/220…240/700 3DIMLT+ E Shipping carton box 20 483 mm x 285 mm x 167 mm 22.99 dm³ 15120.00 g 4008321863515 OT 90/220…240/700 3DIMLT+ E Shipping carton box 20 483 mm x 285 mm x 167 mm 22.99 dm³ 15471.00 g June 17, 2016, 11:44:15 OPTOTRONIC © 2016, OSRAM GmbH. All rights reserved. Page 8 of 9 Product family datasheet Product code Product description Packaging unit (Pieces/Unit) Dimensions (length x width x height) Volume Gross weight 4008321978202 OT 150/220…240/700 3DIMLT+ E Shipping carton box 10 303 mm x 285 mm x 205 mm 17.70 dm³ 11587.00 g The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit. Disclaimer Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release. __ June 17, 2016, 11:44:15 OPTOTRONIC © 2016, OSRAM GmbH. All rights reserved. Page 9 of 9