Evaluation boards for Automotive, Industrial and Multimarket Applications 2011 [ www.infineon.com/evalkits ] 2 Contents Automotive 05 Motor Control 11 Industrial Control & Automation 14 Power Management 18 Lighting & LED Driver 21 Microcontroller 25 RF & Protection Devices 33 Wireless Control 41 3 Design-in made easy with our evaluation boards With our broad range of products and solutions, we have the perfect fit for just about any automotive, consumer, communication or industrial application. Because we are determined to deliver best-in-class technical support for our customers, we complement our product offering with a wide selection of supporting hardware, software and evaluation boards. These evaluation boards are an invaluable design tool. They showcase the most costeffective and innovative solution for your particular design challenge at a glance. In addition, they simplify and speed up design-in thanks to pre-configured hardware. Similar to bills of material, application-oriented overviews of possible product combinations further enhance the design process. This brochure gives you a complete overview of our e valuation board offering, showing you how these boards benefit your design effort in a number of ways. 4 Automotive Board Name Products Description Order No. For Microcontroller, RF & Protection Devices and Wireless Control boards please see the appropriate chapter. BTS 3256D HITFET™ protected low-side power switch Low-side switch TLE 7231G TLE 7233G SPIDER (SPI Driver for Enhanced Relay Control) Demoboard TLE7234/7237 The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7235SE and TLE 7238SL. Demoboard TLE7235/7238 The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7236SE and TLE 7239SL. Demoboard TLE7236/7239 The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7240SL, TLE 7243SL and TLE 7244SL. Demoboard TLE724XSL Multi-channel switch TLE 7240SL TLE 7243SL TLE 7244SL SPIDER (SPI Driver for Enhanced Relay Control) The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7234SE and TLE 7237SL. Multi-channel switch TLE 7236EM TLE 7236SE TLE 7239SL SPIDER (SPI Driver for Enhanced Relay Control) Demoboard TLE7231G/7233G Multi-channel switch TLE 7235EM TLE 7235SE TLE 7238SL SPIDER (SPI Driver for Enhanced Relay Control) SPI Driver for Enhanced Relay Control (SPIDER). This board is designed to interface with the universal body control module system evaluation tool. Multi-channel switch TLE 7234EM TLE 7234SE TLE 7237SL SPIDER (SPI Driver for Enhanced Relay Control) Protected low-side power switch (10mΩ at 25°C). This board Demoboard BTS3256D enables easy startup and connectivity for the new power HITFET™ BTS 3256D. Enables easy read out of digital status via LED, and easy slew rate change via variable resistor on board. Multi-channel switch BTS 50015-1TAA To test one or two devices (in parallel); board can be connected Demoboard BTS50015-1TAA to PowerEasyKit; diagnosis and controlling either directly on the board or by graphical user interface via PowerEasyKit. BTS 50015-1TAA demo board BTS 50060-1TEA demo board PowerPROFET BTS 50060-1TEA For quick-starting into lab evaluation of PROFET™ BTS 50060-1TEA high-side switch. This demo board can drive two parallel loads, such as PTC heaters, glow plugs, seat heating in 12V DC applications. The board provides overtemperature, overload and short circuit protection, as well as detection of open load or short-to-battery. Load current can be measured accurately up to 60A. The board can be used stand-alone, but also in combination with Power Easy Kit for quick start of software evaluation. Demoboard BTS50060-1TEA High-side switch 5 Automotive Board Name Products Description BTC 50010-1TAA The board is designed for one Connect FET (BTC 50010-1TAA) and one Connect FET companion chip (BTC 30010-1TAA). There are possibilities to use BTC 30010-1TAA for parallel switch or reverse blocking to the BTC 50010-1TAA device by different combination of the power jumper on PCB. BTC 50010-1TAA demo board HIC-PROFET™ PROFET™+ demo board PROFET™+ demo board For quick-starting into lab evaluation of Speed PROFET™ BTF 50060-1TEA. This demo board can drive two parallel 12V BDC motors, pumps, valves, or acutators etc. in a setup as a high-side switch with freewheeling diode. The board is capable of 25kHz PWM operation (and above). It provides overtemperature, overload and short circuit protection, as well as detection of open load or short-to-battery. Also, basic EMC filtering on supply line is included. Load current can be measured accurately up to 60A. The board can be used standalone, but also in combination with Power Easy Kit for quick start of software evaluation. Demoboard BTF50060-1TEA BTS 500x0-1EGA For a quick start to lab evaluation, this demo board drives loads such as heating, glow plugs or lamps in 12V DC applications. It uses two devices from the BTS 500x0-1EGA product family, which can be used in parallel and also to drive two independent loads. The board can be used on a standalone basis, but also in combination with power easy kit for quick start of software evaluation. Demoboard BTS50050-1EGA Demoboard BTS50060-1EGA Demoboard BTS50070-1EGA Demoboard BTS50080-1EGA High-side switch High-side switch BTS 5020-2EKA BTS 5030-2EKA BTS 5045-2EKA BTS 5090-2EKA BTS 5120-2EKA BTS 5180-2EKA This demo board is designed to handle all devices within Demoboard PROFET™+ the PROFET™+ family. It provides the complete external circuitry and testpins for a fully functional setup. Additional functions like internal voltage generation for input pins and the possibility to connect more than one demo board for a test setup are included. The demo board comes with a daughterboard that holds the BTS 5020-2EKA which can be replaced by daughterboards of other PROFET™+ devices . High-side switch BTS 5590G BTS 5576G BTS 5566G This board is part of the SPOC (SPI power controller for advanced light control) demo kit. The demo kit consists of the power unit and the control unit (XC2287 power easy kit - to be ordered separately). SPOC I - power easy kit 6 This board is part of the SPOC (SPI power controller for advanced light control) demo kit. The demo kit consists of the power unit and the control unit (XC2287 power easy kit - to be ordered separately). Demoboard BTS5662E BTS5672E BTS5682E BTS5672E BTS5662E Multi-channel switch BTS 6480SF BTS 6460SF BTS 5480SF BTS 5460SF SPOC FL - power easy kit Demoboard BTS5590G BTS5576G BTS5566G Multi-channel switch BTS 5662E BTS 5672E BTS 5682E BTS 5672E BTS 5662E SPOC II - power easy kit Demoboard BTC50010-1TAA Connect FET BTF 50060-1TEA BTF 50060-1TEA demo board Order No. Multi-channel switch This board is part of the SPOC FL (SPI power controller for advanced front light control) demo kit. The demo kit consists of the power unit and the control unit (XC2287 power easy kit - to be ordered separately). Demoboard BTS6480SF BTS6460SF BTS5480SF BTS5460SF Automotive Board Name System basis chip Products Description Order No. TLE 8264-2E TLE 8264E TLE 8263-2E TLE 8263E TLE 8262-2E TLE 8262E TLE 8261-2E TLE 8261E This universal demo board is intended to be used for a system evaluation board for the TLE 826x Hermes system basis chip family. The board allows the user to evaluate all the device features and functions as well as to quickly start the development of the application software. The evaluation kit consists of the power unit and the control unit (power easy kit - to be ordered separately). The graphical user interface allows easy controlling and monitoring of the SBC via SPI (e.g. automatic watchdog triggering). Demoboard TLE8264E V2.0 This universal demo board is intended to be used for a system evaluation board for the TLE 7263 System Basis chip. The board system allows the user to evaluate all the device features and functions as well as to quickly start the development of the application software. The evaluation kit consists of the power unit and the control unit (power easy kit - to be ordered separately). The graphical user interface allows for easy controlling and monitoring of the SBC via SPI (e.g. automatic watchdog triggering). Demoboard TLE7263E This small size DC/DC board is available in the following topologies: –– Boost to battery –– Boost to GND –– SEPIC and can drive LED loads up to 1.5A or higher. Application Board TLD5098EL This board is equipped with TLD 5095EL boost controller, MOSFETs and LEDs or can be used via jumper-seeting with external LED loads up to 1.5A or higher and up to 55V output voltage. Demoboard TLD5095EL This board is equipped with TLD 5098EL boost controller, MOSFETs and LEDs or can be used via jumper-seeting with external LED loads up to 1.5A or higher and up to 60V output voltage. Demoboard TLD5098EL System basis chip TLE 7263 System basis chip System basis chip TLD 5098EL TLD 5098EL application board DC/DC boost controller TLD 5095EL TLD 5095EL demo board DC/DC boost controller TLD 5098EL TLD 5098EL demo board DC/DC boost controller TLD 5085 TLD 5085 demo board DC/DC buck converter TLD 5085 TLD 5085 application board with LED Application Board TLD5085 with LED This board with the TLD 5085 buck converter is equipped with a connector to drive external LED loads up to 1.8A. Application Board TLD5085 with Connector This application board enables you to test the performance of the TLE 8366 basic buck converter. It is equipped with a TLE 8366EV for variable output voltages (preadjusted to 4.8V). The board offers several possibilities to modify the schematic and also the possibility to drive LEDs. Demoboard TLE8366 DC/DC buck converter TLE 8366 Basic buck converter This board with the TLD 5085 buck converter is equipped with one LED or can be used with external LED loads up to 1.8A. DC/DC buck converter TLD 5085 TLD 5085 application board with connector This board with the TLD 5085 buck converter is equipped with Demoboard TLD5085 LEDs or can be used via jumper-seeting with external LED loads up to 1.8A. DC/DC converter 7 Automotive Board Name Buck converter Products Description Order No. TLE 6389-2GV Multi-purpose buck controller for external PMOS switch, 5V or adjustable output voltage, maximum of 2.3A output current, low quiescent current. Demoboard TLE6389-2GV This board is designed to demonstrate the performance of our linear LED driver TLE 4242G and TLE 4309G with Osram high brightness LEDs. It is possible to choose between the two drivers. A potentiometer allows the adjustment of the PWM duty-cycle for dimming the LEDs. Demoboard TLE4242G LED driver/TLE4309 The kit contains two boards, a TLE 7826G evaluation board together with a PCLIN programming and LIN interface card, documentation, software and tools. This enables you from simply playing with the device (without any software development) to developing your own software application (2kB limited Keil IDE). Demoboard TLE7826 DC/DC converter TLE 4309 TLE 4242G LED driver demo board LED driver TLE 7810 TLE 7824 TLE 7826 Embedded power / smart relay driver IC Embedded power TLE 6250G TLE 6251G TLE 6251DS TLE 8250 CAN-LIN transceivers Transceiver TLE 8712EE Powertrain system IC Multi-half bridges TLE 8203E Door module power IC 8 This evaluation kit is intended to provide first-hand experience Demoboard of the door module power IC TLE 8201R which contains all the TLE8201R SP000427080 functions to drive power outputs within a door module, i.e. main lock, safe lock, mirror adjustment, mirror fold, mirror heating and lamps. It provides access to all inputs and outputs with standard 4mm jacks. PC software provided. This evaluation kit is intended to provide first-hand experience Demoboard of the mirror IC TLE 8203E which contains all the functions to TLE8203E SP000897484 drive power outputs within a mirror control module, i.e. mirror heating and lamps. It provides access to all inputs and outputs with standard 4mm jacks. PC software is also included. Designed specifically for automotive (mirror adjustment drive) and industrial motion control applications. The IC contains 3 half-bridge outputs. It provides access to all inputs and outputs with standard 4mm jacks. PC software is provided. Demoboard TLE6208-3G SP000427042 Multi half-bridge driver TLE 6208-6G Hex half-bridge driver Demoboard TLE8712EE Multi-half bridges TLE 6208-3G Triple half-bridge driver A smart 12-channel low-side switch with LVDS-based micro second channel and asynchronous upstream specifically designed for powertrain applications. To be used together with the microcontroller TriCore™ TC1766 demo board (to be ordered seperately). Multi-channel switch TLE 8201R Door module power IC Basic control unit to generate CAN-, LIN- and FlexRay CAN-LIN Universal Demoboard datastreams. Plug & play, ready to use system to build up complete CAN-, LIN-, and FlexRay networks. Additional software examples are provided to allow timing measurements and to verify signal integrity. Multi half-bridge driver Designed specifically for automotive (climate control flap drive) Demoboard and industrial motion control applications. The IC contains 6 TLE6208-6G SP000427044 HSS channels and 6 LSS channels and can be used as a freely configurable switch, half bridge or H-bridge driver. It provides access to all inputs and outputs with standard 4mm jacks. Automotive Board Name 2-phase stepper motor driver IC Products Description Order No. TLE 4729G The TLE 4729G is designed specifically for automotive stepper Demoboard motor applications such as automatic head beam leveling, TLE4729G SP000427040 idle speed control, etc. The device offers peak current control with fixed frequency (current chopper) of up to half step modes where the target current is set up by an external sense resistor, Rsense. Stepper driver TLE 8444SL The TLE 8444SL is designed specifically for automotive applications such as idle speed control. The device is suitable to drive stepper motors requiring voltage control or DC motors. Demoboard TLE8444SL SP000637312 The TLE 841xyEL is a multi half-bridge driver and is part of a family of devices designed specifically for automotive HVAC flap motors and mirror adjustment motors. The IC can be used as a half-bridge or H-bridge driver. The TLE 841xyEL demo board is intended to provide a simple, easy to use tool for first application tests. The evaluation kit contains a TLE 841xyEL application board and a USB stick with documentation and software to interact with the demo board. Demoboard TLE84110EL SP000777008 Demoboard TLE84106EL SP000777006 Contains two of our NovalithIC™ components in a typical H-bridge configuration including peripheral components and reverse polarity protection. The board is suitable for all members of the NovalithIC™ family (BTN 79XXB). Demoboard BTN7930B Demoboard BTN7933B Demoboard BTN7960B Demoboard BTN7963B Demoboard BTN7970B Demoboard BTN7971B Demoboard BTN7973B Multi half-bridge Quad half-bridge driver IC driver IC family TLE 841xyEL Multi half bridge Demo board TLE 841xyEL driver IC family BTN 793xB BTN 796xB BTN 797xB NovalithIC™ H-bridge Half-bridge TLE 7183F 3-phase motor driver Motor driver TLE 8209-2SA H-bridge for DC-motor applications H-bridge motor driver TLE 7241E Constant current control IC This evaluation kit is designed to demonstrate the performance Demoboard TLE8209-2SA of the TLE 8209-2SA, a monolithic IC for driving DC motors in safety-critical automotive applications, in particular electronic throttle and exhaust gas recirculation valve control. The TLE 8209-2SA features four selectable current ranges, two selectable slew rate settings and extensive diagnosis via SPI. The device monitors the digital supply voltage VDD and shuts down the output stages in case of VDD over- or undervoltage, thus providing a safe switch-off path in case of malfunction of the digital control circuitry. This evaluation kit is designed to demonstrate the performance Demoboard of the TLE 7241E, a 2-channel, low-side constant current driver TLE7241E Evaluation kit with p rogrammable current, dither amplitude, dither frequency and slew rate. Best suited for transmission applications using proportional valves. Constant current control IC TLE 6288R Powertrain system IC This evaluation kit is designed to demonstrate the performance Demoboard of the TLE 7183F 3-phase motor driver. Typical applications TLE7183F REV. 1.0 are cooling fans, water pumps, electrohydraulics and electric power steering. The TLE 7183F is designed for a 12V power net. Multi-channel switch The TLE 6288R is a 6-channel smart multi-channel switch with embedded protection, diagnosis and configurable functions. Channels 1-3 are high-side switches with integrated charge pump and can be programmed to do autonomous peak and hold current regulation with PWM. Channels 4-6 can be configured as high-side or low-side switches. This IC can be used to drive loads in high-side or low-side applications with switching frequencies up to 10kHz. Demoboard TLE6288R 9 Automotive Board Name Powertrain system IC Products Description Order No. TLE 6244X This evaluation board is designed to demonstrate the performance of the TLE 6244X. The application board is equipped with a 5V linear voltage regulator U1 (TLE 4264G) that can be connected directly to 12V (battery). Demoboard TLE6244X A smart 10-channel low-side switch with serial peripheral interface (SPI). To be used together with the microcontroller XC2287 power easy kit (to be ordered seperately). Demoboard TLE8110E A smart 12-channel low-side switch with serial peripheral interface (SPI). To be used together with the microcontroller XC2287 power easy kit (to be ordered seperately). Demoboard TLE8112EE A smart 10-channel low-side switch with TTL-based multichannel and asynchronous upstream specifically designed for powertrain applications. To be used together with the microcontroller TriCore™ TC1766 demo board (to be ordered seperately). Demoboard TLE8510EE A smart 12-channel low-side switch with TTL-based multichannel and asynchronous upstream specifically designed for powertrain applications. To be used together with the microcontroller TriCore™ TC1766 demo board (to be ordered seperately). Demoboard TLE8512EE A smart 10-channel low-side switch with LVDS-based micro second channel and asynchronous upstream specifically designed for powertrain applications. To be used together with the microcontroller TriCore™ TC1766 demo board (to be ordered seperately). Demoboard TLE8710EE A smart 10-channel low-side switch with serial peripheral interface (SPI). To be used together with the microcontroller XC2287 power easy kit (to be ordered seperately). Demoboard TLE8110SA A smart 12-channel low-side switch with TTL-based multichannel and asynchronous upstream specifically designed for powertrain applications. To be used together with the microcontroller TriCore™ TC1766 demo board (to be ordered seperately). Demoboard TLE8512SA Multi-channel switch TLE 8110E Powertrain system IC Multi-channel switch TLE 8112EE Powertrain system IC Multi-channel switch TLE 8510EE Powertrain system IC Multi-channel switch TLE 8512EE Powertrain system IC Multi-channel switch TLE 8710EE Powertrain system IC Multi-channel switch TLE 8110SA Powertrain system IC Multi-channel switch TLE 8512SA Powertrain system IC 10 Multi-channel switch Automotive Board Name Powertrain system IC Products Description Order No. TLE 8712SA A smart 12-channels low-side switch with LVDS based micro second channel and asynchronous upstream specifically designed for powertrain applications. To be used together with the microcontroller TriCore™ TC1766 demo board (to be ordered seperately). Demoboard TLE8712SA Programmer and interface box for all linear Hall and angle sensors. SP000875082 The kit consists of a PGSISI box (programming interface) and an evaluation board which allows evaluation of the linear Hall TLE 4997 family. The evaluation board (PCB) is available seperately (without PGSISI box). TLE4997x Programmer kit SP000439708 TLE4997 Evalboard SP000875086 The kit consists of a PGSISI box (programming interface) and an evaluation board which allows evaluation of the linear Hall TLE 4998 family. The evaluation board (PCB) is available seperately (without PGSISI box). TLE4998x Programmer kit SP000425300 TLE4998 Evalboard SP000875090 The kit consists of a PGSISI box and an evaluation board and allows evaluation of an integrated Giant Magneto Resistance (iGMR) angle sensor. The evaluation board (PCB) with angle sensor and rotating magnet is available seperately (without PGSISI box). TLE 5009 Evalkit SP000871462 TLE 5009 Evalboard (PCB) SP000871466 The kit consists of a PGSISI box and an evaluation board and allows evaluation of an integrated Giant Magneto Resistance (iGMR) angle sensor. The evaluation board (PCB) with angle sensor and rotating magnet is available seperately (without PGSISI box). TLE5011 Evalkit SP000634330 TLE5011 Evalboard (PCB) SP000634322 The kit consists of a PGSISI box and an evaluation board and allows evaluation of an integrated Giant Magneto Resistance (iGMR) angle sensor. The evaluation board (PCB) with angle sensor and rotating magnet is available seperately (without PGSISI box). TLE5012 Evalkit SP000634334 TLE5012 Evalboard (PCB) SP000634326 Multi-channel switch TLE xxxx PGSISI-2 interface box Magnetic sensors TLE 4997x TLE 4997x Programmer kit Linear Hall sensor TLE 4998x TLE 4998x Programmer kit Linear Hall sensor TLE 5009 TLE 5009 Evalkit Angle sensor TLE 5011 TLE 5011 Evalkit Angle sensor TLE 5012 TLE 5012 Evalkit Angle sensor TLE 492x TLE 498x Powertrain programmer kit Evaluation and programming tool for crankshaft (TLE 492x) and TLE498x Programmer Kit, camshaft (TLE 498x) Hall sensors. SP000451572 Powertrain Hall sensor 11 Automotive Board Name SP37 development kit Products Description Order No. SP37 The SP37 development kit enables evaluation of the entire feature set of the tire pressure sensor SP37, such as RF transmitter functionality and LF receiver functionality; additionally it allows software development and in-circuit debugging. The development kit includes the required evaluation hardware, SP37 devices, an integrated software development environment, documentation and a selection of sample software. SP37-315-8 DEVELOP KIT SP000518282 (with 315MHz transmitter) SP37-434-8 DEVELOP KIT SP000518286 (with 434MHz transmitter) The KP 106 evaluation kit for side airbag pressure sensors provides the possibility to evaluate the complete functionality of the KP 106 side airbag pressure sensor family. This includes voltage supply, an easy sensor insertion socket and signal conditioning. The calculated pressure values can be transmitted to the PC using the PGSISI adapter. KP106 KIT SP000367787 The KP 200 evaluation kit for side airbag pressure sensors provides the possibility to evaluate the complete functionality of the KP 200 side airbag pressure sensor family. This includes voltage supply, an easy sensor insertion socket and signal conditioning. SP000861680 KP 12x sensor stick with internal KP 125 sensor. The KP MAP/ BAP demonstrator is an easy and ready to use tool to discover the capabilities of the Infineon KP pressure sensor family. The required software and promotional material is included in the integrated memory stick and can be downloaded right away. All features are implemented in a USB stick with a graphical user interface to manipulate and evaluate the sensor behavior. KP MAP/BAP Demonstrator SP000463010 KP Demo pressure coupling SP000534842 KP Extension board SP000534838 Tire pressure sensor KP 106 KP 106 kit Side Airbag Sensor (SAB) KP 200 KP 200/KP 108 kit Side Airbag Sensor (SAB) KP 12x USB pressure-sensor stick Pressure sensor 1ED020I12-FA HybridPACK™1 Hybrid-Kit for HybridPACK™1 Power module 6ED100HP1-FA 6ED100HP2-FA Hybrid-Kit for HybridPACK™2 12 Complete inverter/DC-DC solution for applications up to 20kW SP000554548 (Mild Hybrid) with IGBT module HybridPACK™1 (FS400R06KE3) 600V/400A, employing coreless transformer isolated driver (1ED020I12-FA) and overvoltage protection (active clamping). Possibility of different motor interfaces: encoder, GMR, resolver. Microcontroller board included based on 32-bit TC1767 (TriCore™ family) Power module Complete inverter/DC-DC solution for applications up to 80kW SP000554548 (Full Hybrid Electrical Vehicles) with IGBT module HybridPACK™2 (FS800R07A2E3) 650V/800A, employing coreless transformer isolated driver (1ED020I12-FA) and overvoltage protection (active clamping). Possibility of different motor interfaces: encoder, GMR, resolver. Microcontroller board included based on 32-bit TC1767 (TriCore™ family). Motor Control Board Name Products Description Order No. For Microcontroller, RF & Protection Devices and Wireless Control boards please see the appropriate chapter. TLE 7810 TLE 7824 TLE 7826 Embedded power/ smart relay driver IC Demoboard TLE7826 For quick-starting into lab evaluation of Speed PROFET™ BTF 50060-1TEA. This demo board can drive two parallel 12V BDC motors, pumps, valves, or acutators etc. in a setup as a high-side switch with freewheeling diode. The board is capable of 25kHz PWM operation (and above). It provides overtemperature, overload and short circuit protection, as well as detection of open load or short-to-battery. Also, basic EMC filtering on supply line is included. Load current can be measured accurately up to 60A. The board can be used standalone, but also in combination with Power Easy Kit for quick start of software evaluation. Demoboard BTF50060-1TEA Embedded power BTF 50060-1TEA BTF 50060-1TEA demo board The kit contains two boards, a TLE 7826G evaluation board together with a PCLIN programming and LIN interface card, documentation, software and tools. This enables you from simply playing with the device (without any software development) to developing your own software application (2kB limited Keil IDE). High-side switch 13 Motor Control Board Name Door module power IC Products Description TLE 8201R This evaluation kit is intended to provide first-hand experience Demoboard of the door module power IC TLE 8201R which contains all the TLE8201R SP000427080 functions to drive power outputs within a door module, i.e. main lock, safe lock, mirror adjustment, mirror fold, mirror heating and lamps. It provides access to all inputs and outputs with standard 4mm jacks. PC software provided. Multi-half bridges TLE 8203E Door module power IC Multi-half bridges TLE 6208-3G Triple half-bridge driver Order No. This evaluation kit is intended to provide first-hand experience Demoboard of the mirror IC TLE 8203E which contains all the functions to TLE8203E SP000897484 drive power outputs within a mirror control module, i.e. mirror heating and lamps. It provides access to all inputs and outputs with standard 4mm jacks. PC software is also included. Designed specifically for automotive (mirror adjustment drive) and industrial motion control applications. The IC contains 3 half-bridge outputs. It provides access to all inputs and outputs with standard 4mm jacks. PC software is provided. Demoboard TLE6208-3G SP000427042 Multi half-bridge driver TLE 6208-6G Hex half-bridge driver Designed specifically for automotive (climate control flap drive) Demoboard and industrial motion control applications. The IC contains 6 TLE6208-6G SP000427044 HSS channels and 6 LSS channels and can be used as a freely configurable switch, half bridge or H-bridge driver. It provides Multi half-bridge access to all inputs and outputs with standard 4mm jacks. driver TLE 4729G 2-phase stepper motor driver IC The TLE 4729G is designed specifically for automotive stepper Demoboard motor applications such as automatic head beam leveling, TLE4729G SP000427040 idle speed control, etc. The device offers peak current control with fixed frequency (current chopper) of up to half step modes where the target current is set up by an external sense resistor, Rsense. Stepper driver TLE 8444SL The TLE 8444SL is designed specifically for automotive applications such as idle speed control. The device is suitable to drive stepper motors requiring voltage control or DC motors. Demoboard TLE8444SL SP000637312 Contains two of our NovalithIC™ components in a typical H-bridge configuration including peripheral components and reverse polarity protection. The board is suitable for all members of the NovalithIC™ family (BTN 79XXB). Demoboard BTN7930B Demoboard BTN7933B Demoboard BTN7960B Demoboard BTN7963B Demoboard BTN7970B Demoboard BTN7971B Demoboard BTN7973B Multi half-bridge Quad half-bridge driver IC driver IC family BTN 793xB BTN 796xB BTN 797xB NovalithIC™ H-bridge Half-bridge TLE 7183F 3-phase motor driver 3-phase gate driver TLE 8209-2SA H-bridge for DC motor applications H-bridge motor driver 2ED300C17-S EiceDRIVER™ 2ED300E17-SFO1) 14 This evaluation kit is designed to demonstrate the performance Demoboard TLE7183F REV. 1.0 of the TLE 7183F 3-phase motor driver. Typical applications are cooling fans, water pumps, electrohydraulics and electric power steering. The TLE 7183F is designed for a 12V power net. Gate driver This evaluation kit is designed to demonstrate the performance of Demoboard TLE8209-2SA the TLE 8209-2SA, a monolithic IC for driving DC motors in safetycritical automotive applications, in particular electronic throttle and exhaust gas recirculation valve control. The TLE 8209-2SA features four selectable current ranges, two selectable slew rate settings and extensive diagnosis via SPI. The device monitors the digital supply voltage VDD and shuts down the output stages in case of VDD over- or undervoltage, thus providing a safe switch-off path in case of malfunction of the digital control circuitry. This evaluation board for the 2ED300C17-S IGBT driver board 2ED300E17-SFO_EVAL may be used for all medium and high power IGBT modules up SP000355559 to 1700V. Electrical as well as optical (optional) interfacing is provided. For some modules, complementary module adapters are available to connect to the module. Complementary module adapters to be ordered seperately. Motor Control Board Name 7ED020E12-FI-W21) Products Description FP35R12W2T4, 2ED020I12-FI EiceDRIVER™ Power stage for UPS and solar applications implementing a 7ED020E12-FI-W2_EVAL 3-level topology within a single Easy2B module using 650V SP000367466 IGBT3 devices. Coreless transformer halfbridge IGBT drivers are employed for gate control and protection. Gate driver Easy2B-3-level 1ED020I12-F EiceDRIVER™ F3L030E07-F-W21) Driver board for EconoDUAL™3 IGBT modules, employing coreless transformer single-channel driver 1ED020I12-F. IGBT module to be ordered seperately. 2ED100E12-F2_EVAL SP000405780 IGBT driver board for EconoPACK™+ IGBT modules, employing coreless transformer single-channel driver 1ED020I12-F. IGBT module to be ordered seperately. 6ED100E12-F2_EVAL SP0005055796 Adapter board containing additional booster stage suitable for driving 1200V PrimePACK™ in single or parallel configuration. Operates together with 2ED300C17-SFO. Module to be ordered seperately. MA300E12_EVAL SP000372039 Adapter board containing additional booster stage suitable for driving 1700V PrimePACK™ in single or parallel configuration. Operates together with 2ED300C17-SFO. Module to be ordered seperately. MA300E17_EVAL SP000355552 Power modules PrimePACK™2 PrimePACK™3 1ED020I12-F EiceDriver™ 2ED250E12-F1) MA040E12_EVAL SP000801082 Power modules PrimePACK™2 PrimePACK™3 MA300E171) Adapter board containing an isolated gate driver power supply and logic interface for MIPAQ™ serve. Functional IGBT module to be ordered seperately. Gate driver PrimePACK™2 PrimePACK™3 MA300E121) MA3AE12_EVAL SP000855486 Gate driver EconoPACK™+, 1ED020I12-F EiceDRIVER™ 6ED100E12-F21) Adapter board containing an isolating amplifier for current measurement with MIPAQ™ base. IGBT module to be ordered seperately. Power modules EconoDUAL™3, 1ED020I12-F EiceDRIVER™ 2ED100E12-F21) 7ED020E12_FI_U1_EVAL SP000843040 Power modules MIPAQ™ serve MA040E121) Power stage for industrial IGBT drives using a PIM module in a Smart1 package containing three-phase input rectifier, brake chopper and inverter bridge using IGBT4 devices. Coreless transformer half-bridge IGBT drivers are employed for gate control and protection. IGBT module to be ordered seperately. Gate driver MIPAQ™ base MA3AE121) Power stage for UPS and solar applications using a 3-level F3L030E07-F-W2_EVAL module in an Easy2B inverter stage using 650V IGBT3 devices. SP000868768 Coreless transformer IGBT drivers are employed for gate control and protection. IGBT module to be ordered seperately. Gate driver SmartPIM 1 2ED020I12-FI EiceDRIVER™ 7ED020E12_FI_U11) Order No. Driver board for 1200V PrimePACK™2 and PrimePACK™3 IGBT 2ED250E12-F_EVAL modules, employing coreless transformer single-channel driver SP000614428 1ED020I12-F. IGBT module to be ordered seperately. Gate driver 1) Please remark that Industrial Power products are only available through our special distributors: Arihant (India), Comelec (Italy), Dabo (Korea), Dachs (Denmark), EBV (EMEA), Elecbiz (Taiwan), Eurotone (China), Hans Buch (Denmark), Jingchuan (China), Nisko (Israel), Symmetron (Russia) In the Americas, please contact Infineon Tech. Industrial Power Inc., phone: #908-236-5600 15 Industrial Control & Automation Board Name Products Description Order No. For Microcontroller, RF & Protection Devices and Wireless Control boards please see the appropriate chapter. BTS 3256D HITFET™ protected low-side power switch Low-side switch TLE 7231G TLE 7233G SPIDER (SPI Driver for Enhanced Relay Control) 16 Demoboard TLE7231G/7233G The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7234SE and TLE 7237SL. Demoboard TLE7234/7237 The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7235SE and TLE 7238SL. Demoboard TLE7235/7238 Multi-channel switch TLE 7235EM TLE 7235SE TLE 7238SL SPIDER (SPI Driver for Enhanced Relay Control) SPI Driver for Enhanced Relay Control (SPIDER). This board is designed to interface with the universal body control module system evaluation tool. Multi-channel switch TLE 7234EM TLE 7234SE TLE 7237SL SPIDER (SPI Driver for Enhanced Relay Control) Protected low-side power switch (10mΩ at 25°C). This board Demoboard BTS3256D enables easy startup and connectivity for the new power HITFET™ BTS 3256D. Enables easy read out of digital status via LED, and easy slew rate change via variable resistor on board. Multi-channel switch Industrial Control & Automation Board Name SPIDER (SPI Driver for Enhanced Relay Control) Products Description Order No. TLE 7236EM TLE 7236SE TLE 7239SL The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7236SE and TLE 7239SL. Demoboard TLE7236/7239 The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7240SL, TLE 7243SL and TLE 7244SL. Demoboard TLE724XSL Multi-channel switch TLE 7240SL TLE 7243SL TLE 7244SL SPIDER (SPI Driver for Enhanced Relay Control) Multi-channel switch BTS50015-1TAA To test one or two devices (in parallel); Board can be connected Demoboard BTS50015-1TAA to PowerEasyKit; diagnosis and controlling either directly on the board or by graphical user interface via PowerEasyKit BTS 50015-1TAA demo board PowerPROFET BTS 50060-1TEA demo baord BTS 50060-1TEA For quick-starting into lab evaluation of PROFET™ BTS 50060Demoboard BTS50060-1TEA 1TEA high-side switch. This demo board can drive two parallel loads, such as PTC heaters, glow plugs, seat heating in 12V DC applications. The board provides overtemperature, overload and short circuit protection, as well as detection of open load or short-to-battery. Load current can be measured accurately up to 60A. The board can be used stand-alone, but also in combination with Power Easy Kit for quick start of software evaluation. High-side switch BTF 50060-1TEA Demoboard BTF50060-1TEA BTF 50060-1TEA demo board For quick-starting into lab evaluation of Speed PROFET™ BTF 50060-1TEA. This demo board can drive two parallel 12V BDC motors, pumps, valves, or acutators etc. in a setup as a high-side switch with freewheeling diode. The board is capable of 25kHz PWM operation (and above). It provides overtemperature, overload and short circuit protection, as well as detection of open load or short-to-battery. Also, basic EMC filtering on supply line is included. Load current can be measured accurately up to 60A. The board can be used standalone, but also in combination with Power Easy Kit for quick High-side switch start of software evaluation. Demoboard BTS50050-1EGA Demoboard BTS50060-1EGA Demoboard BTS50070-1EGA Demoboard BTS50080-1EGA HIC-PROFET™ BTS 500x0-1EGA For a quick start to lab evaluation, this demo board drives loads such as heating, glow plugs or lamps in 12V DC applications. It uses two devices from the BTS 500x0-1EGA product family, which can be used in parallel but also to drive two independent loads. The board can be used on a standalone basis, but also in combination with the power easy kit High-side switch for a quick start to software evaluation. PROFET™+ demo board BTS 5020-2EKA BTS 5030-2EKA BTS 5045-2EKA BTS 5090-2EKA BTS 5120-2EKA BTS 5180-2EKA PROFET™+ demo board High-side switch TLE 8366 Basic buck converter This demo board is designed to handle all devices within Demoboard PROFET™+ the PROFET™+ family. It provides the complete external circuitry and testpins for a fully functional setup. Additional functions like internal voltage generation for input pins and the possibility to connect more than one demo board for a test setup are included. The demo board comes with a daughterboard that holds the BTS 5020-2EKA which can be replaced by daughterboards of other PROFET™+ devices . This application board enables you to test the performance of the TLE 8366 basic buck converter. It is equipped with a TLE 8366EV for variable output voltages (preadjusted to 4.8V). The board offers several possibilities to modify the schematic and also the possibility to drive LEDs. Demoboard TLE8366 DC/DC converter 17 Industrial Control & Automation Board Name Buck converter Products Description Order No. TLE 6389-2GV Multi-purpose buck controller for external PMOS switch, 5V or adjustable output voltage, maximum of 2.3A output current, low quiescent current. Demoboard TLE6389-2GV The kit contains two boards, a TLE 7826G evaluation board together with a PCLIN programming and LIN interface card, documentation, software and tools. This enables you from simply playing with the device (without any software development) to developing your own software application (2kB limited Keil IDE). Demoboard TLE7826 DC/DC converter TLE 7810 TLE 7824 TLE 7826 Embedded power/ smart relay driver IC Embedded power TLE 6250G TLE 6251G TLE 6251DS TLE 8250 CAN-LIN transceivers Transceiver TLE 6208-3G Triple half-bridge driver Demoboard TLE6208-3G SP000427042 Designed specifically for automotive (climate control flap drive) Demoboard and industrial motion control applications. The IC contains 6 TLE6208-6G SP000427044 HSS channels and 6 LSS channels and can be used as a freely configurable switch, half bridge or H-bridge driver. It provides access to all inputs and outputs with standard 4mm jacks. Multi half-bridge driver TLE 4729G 2-phase stepper motor driver IC Designed specifically for automotive (mirror adjustment drive) and industrial motion control applications. The IC contains 3 half-bridge outputs. It provides access to all inputs and outputs with standard 4mm jacks. PC software is provided. Multi half-bridge driver TLE 6208-6G Hex half-bridge driver Basic control unit to generate CAN-, LIN- and FlexRay CAN-LIN Universal Demoboard datastreams. Plug & play, ready to use system to build up complete CAN-, LIN-, and FlexRay networks. Additional software examples are provided to allow timing measurements and to verify signal integrity. The TLE 4729G is designed specifically for automotive stepper Demoboard motor applications such as automatic head beam leveling, TLE4729G SP000427040 idle speed control, etc. The device offers peak current control with fixed frequency (current chopper) of up to half step modes where the target current is set up by an external sense resistor, Rsense. Stepper driver TLE 8444SL The TLE 8444SL is designed specifically for automotive applications such as idle speed control. The device is suitable to drive stepper motors requiring voltage control or DC motors. Demoboard TLE8444SL SP000637312 Contains two of our NovalithIC™ components in a typical H-bridge configuration including peripheral components and reverse polarity protection. The board is suitable for all members of the NovalithIC™ family (BTN 79XXB). Demoboard BTN7930B Demoboard BTN7933B Demoboard BTN7960B Demoboard BTN7963B Demoboard BTN7970B Demoboard BTN7971B Demoboard BTN7973B Multi half-bridge Quad half-bridge driver IC driver IC family BTN 793xB BTN 796xB BTN 797xB NovalithIC™ H-bridge Half-bridge TLE 7183F 3-phase motor driver 18 3-phase gate driver This evaluation kit is designed to demonstrate the performance Demoboard TLE7183F REV. 1.0 of the TLE 7183F 3-phase motor driver. Typical applications are cooling fans, water pumps, electrohydraulics and electric power steering. The TLE 7183F is designed for a 12V power net. Industrial Control & Automation Board Name H-bridge for DC-motor applications Products Description TLE 8209-2SA This evaluation kit is designed to demonstrate the performance Demoboard TLE8209-2SA of the TLE 8209-2SA, a monolithic IC for driving DC motors in safety-critical automotive applications, in particular electronic throttle and exhaust gas recirculation valve control. The TLE 8209-2SA features four selectable current ranges, two selectable slew rate settings and extensive diagnosis via SPI. The device monitors the digital supply voltage VDD and shuts down the output stages in case of VDD over- or undervoltage, thus providing a safe switch-off path in case of malfunction of the digital control circuitry. H-bridge motor driver TLE 7241E Constant current control IC Constant current control IC TLE 4997x TLE 4997x Programmer kit Linear Hall sensor TLE 4998x TLE 4998x Programmer kit Linear Hall sensor TLE 5011 TLE 5011 Evalkit Angle sensor TLE 5012 TLE 5012 Evalkit Angle sensor KP 12x USB pressure-sensor stick The kit consists of a PGSISI box (programming interface) and an evaluation board which allows evaluation of the linear Hall TLE 4997 family. The evaluation board (PCB) is available seperately (without PGSISI box). TLE4997x Programmer kit SP000439708 TLE4997 Evalboard SP000875086 The kit consists of a PGSISI box (programming interface) and an evaluation board which allows evaluation of the linear Hall TLE 4998 family. The evaluation board (PCB) is available seperately (without PGSISI box). TLE4998x Programmer kit SP000425300 TLE4998 Evalboard SP000875090 The kit consists of a PGSISI box and an evaluation board and allows evaluation of an integrated Giant Magneto Resistance (iGMR) angle sensor. The evaluation board (PCB) with angle sensor and rotating magnet is available seperately (without PGSISI box). TLE5011 Evalkit SP000634330 TLE5011 Evalboard (PCB) SP000634322 The kit consists of a PGSISI box and an evaluation board and allows evaluation of an integrated Giant Magneto Resistance (iGMR) angle sensor. The evaluation board (PCB) with angle sensor and rotating magnet is available seperately (without PGSISI box). TLE5012 Evalkit SP000634334 TLE5012 Evalboard (PCB) SP000634326 KP 12x sensor stick with internal KP 125 sensor. The KP MAP/ BAP demonstrator is an easy and ready to use tool to discover the capabilities of the Infineon KP pressure sensor family. The required software and promotional material is included in the integrated memory stick and can be downloaded right away. All features are implemented in a USB stick with a graphical user interface to manipulate and evaluate the sensor behavior. KP MAP/BAP Demonstrator SP000463010 KP Demo pressure coupling SP000534842 KP Extension board SP000534838 Coreless transformer isolated high-side 8-bit parallel data inter-face for 5V input providing fully protected power switches and handling currents up to 625mA. EVAL 2X8-ISO1H801G Coreless transformer isolated high-side 8-bit serial data interface for 5V input providing fully protected power switches and handling currents up to 625mA. EVAL 2X8-ISO1H802G Isolated high-side driver ISO 1H802G ISOFACE™ EVAL 2X8-ISO1H802G This evaluation kit is designed to demonstrate the performance Demoboard of the TLE 7241E, a 2-channel, low-side constant current driver TLE7241E Evaluation kit with programmable current, dither amplitude, dither frequency and slew rate. Best suited for transmission applications using proportional valves. Pressure sensor ISO 1H801G ISOFACE™ EVAL 2X8-ISO1H801G Order No. Isolated high-side driver 19 Power Management Board Name Products Description Order No. For Microcontroller evaluation boards, please see “Microcontroller” category. TLE 7263 System basis chip System basis chip This universal demo board is intended to be used for a system evaluation board for the TLE 7263 system basis chip. The board allows the user to evaluate all the device features and functions as well as to quickly start the development of the application software. The evaluation kit consists of the power unit and the control unit (power easy kit - to be ordered seperately). The graphical user interface allows easy controlling and monitoring of the SBC via SPI (e.g. automatic System basis chip watchdog triggering). Demoboard TLE7263E TLE 8264-2E TLE 8264E TLE 8263-2E TLE 8263E TLE 8262-2E TLE 8262E TLE 8261-2E TLE 8261E This universal demo board is intended to be used for a system evaluation board for the TLE 826x Hermes system basis chip family. The board allows the user to evaluate all the device features and functions as well as to quickly start the development of the application software. The evaluation kit consists of the power unit and the control unit (power easy kit - to be ordered seperately). The graphical user interface allows easy controlling and monitoring of the SBC via SPI (e.g. automatic watchdog triggering). Demoboard TLE8264E V2.0 This application board enables you to test the performance of the TLE 8366 basic buck converter. It is equipped with a TLE 8366EV for variable output voltages (preadjusted to 4.8V). The board offers several possibilities to modify the schematic and also the possibility to drive LEDs. Demoboard TLE8366 System basis chip TLE 8366 Basic buck converter 20 DC/DC converter Power Management Board Name Buck converter Products Description Order No. TLE 6389-2GV Multi-purpose buck controller for external PMOS switch, 5V or adjustable output voltage, maximum of 2.3A output current, low quiescent current. Demoboard TLE6389-2GV This application board enables you to test the performance of the TLE 8366 basic buck converter. It is equipped with a TLE 8366EV for variable output voltages (preadjusted to 4.8V). The board offers several possibilities to modify the schematic and also the possibility to drive LEDs. EVALPFC2-ICE2PCS01 Multi-purpose buck controller for external PMOS switch, 5V or adjustable output voltage, maximum of 2.3A output current, low quiescent current. EVALPFC2-ICE2PCS02 CCM PFC controller for 300W PFC evaluation board with 85~265V AC universal input and 393V DC fixed output. EVALPFC2-ICE2PCS03 CCM PFC controller for 300W PFC evaluation board with 85~265V AC universal input and 393V DC fixed output. EVALPFC2-ICE2PCS04 QR controller for 160W TV applications. EVALQRS-ICE2QS01-160W QR controller for 25W DVD, VCD and VCR. EVALS-25W- ICE2QS01 QR controller for 80W LCD TV, home audio or printer applications. EVALQRS-ICE2QS02G-80W 12W SMPS demo board with CoolSET™ F3 w/o latched off mode. EVALSF3-ICE3B0565 F3 CoolSET™ for 20W SMPS evaluation board. EVALSF3-ICE3B1565 F3 CoolSET™ for 30.4W SMPS evaluation board. EVALSF3-ICE3B2565 F3 CoolSET™ for 40W 18V SMPS evaluation board. EVALSF3-ICE3B2065P DC/DC converter ICE 2PCS01 EVALPFC2-ICE2PCS01 Power control IC ICE 2PCS02 EVALPFC2-ICE2PCS02 Power control IC ICE 2PCS03 EVALPFC2-ICE2PCS03 Power control IC ICE 2PCS04 EVALPFC2-ICE2PCS04 Power control IC ICE 2QS01 EVALQRS-ICE2QS01-160W Power control IC ICE 2QS01 EVALS-25W-ICE2QS01 Power control IC ICE 2QS02G EVALQRS-ICE2QS02G80W Power control IC ICE 3B0565 EVALSF3-ICE3B0565 Power control IC ICE 3B1565 EVALSF3-ICE3B1565 Power control IC ICE 3B2565 EVALSF3-ICE3B 2565 Power control IC ICE 3B2065P EVALSF3-ICE3B2065P Power control IC 21 Power Management Board Name EVALSF3-ICE3A5565P Products Description Order No. ICE 3A5565P F3 CoolSET™ for 100W 18V SMPS evaluation board. EVALSF3-ICE3A5565P F3 CoolSET™ for 12W 5.0V SMPS evaluation board. EVALSF3-ICE3B0565J F3 CoolSET™ for 6W 12.5V SMPS evaluation board. EVALM-ICE3A0365 F3 CoolSET™ for 15W 5.0V SMPS evaluation board. EVALSF3-ICE3A1065LJ F3 CoolSET™ for 12W 5.0V SMPS evaluation board. EVALSF3R-ICE3BR4765J F3 CoolSET™ for 30W 16V SMPS evaluation board. EVALSF3R-ICE3BR0665J F3 CoolSET™ for 100W 18V SMPS evaluation board. EVALSF3R-ICE3BR0665JF F3 CoolSET™ for 15W 5.0V SMPS evaluation board. EVALSF3-ICE3A1065ELJ F3 CoolSET™ for 40W 18V SMPS evaluation board. EVALSF3R-ICE3BR2565JF ICE 3DS01G: PWM controller for 28W LCD monitor. EVALSF3-ICE3DS01G ICE 3DS01L(G): F3 controller for 60W LCD monitor, adapter, DVD and STB. EVALSF3-ICE3DS01L(G) ICE 3AS02: F3 controller for 60W LCD monitor, adapter, DVD, STB and auxiliary power supplies. EVALSF3-ICE3AS02 ICE 3BS03LJG: F3 controller for 60W LCD monitor, adapter, DVD, STB and auxiliary power supplies. EVALSF3-ICE3BS03LJG Power control IC ICE 3B0565J VALSF3-ICE3B0565J Power control IC ICE 3A0365 EVALM-ICE3A0365 Power control IC ICE 3A1065LJ EVALSF3-ICE3A1065LJ Power control IC ICE 3BR4765J EVALSF3R-ICE3BR4765J Power control IC ICE 3BR0665J EVALSF3R-ICE3BR0665J Power control IC ICE 3BR0665JF EVALSF3R-IC-3BR0665JF Power control IC ICE 3A1065ELJ EVALSF3-ICE3A1065ELJ Power control IC ICE 3BR2565JF EVALSF3R-IC-3BR2565JF Power control IC ICE 3DS01G EVALSF3-ICE3DS01G Power control IC ICE 3DS01L(G) EVALSF3-ICE3DS01L(G) Power control IC ICE 3AS02 EVALSF3-ICE3AS02 Power control IC ICE 3BS03LJG EVALSF3-ICE3BS03LJG 22 Power control IC Lighting & LED Driver Board Name Products Description Order No. For Microcontroller evaluation boards, please see “Microcontroller” category. TLE 8366 Basic buck converter DC/DC converter TLE 6389-2GV Buck converter Multi-purpose buck controller for external PMOS switch, 5V or adjustable output voltage, maximum of 2.3A output current, low quiescent current. Demoboard TLE6389-2GV This board is designed to demonstrate the performance of our linear LED driver TLE 4242G and TLE 4309G with Osram high brightness LEDs. It is possible to choose between the two drivers. A potentiometer allows the adjustment of the PWM duty-cycle for dimming the LEDs. Demoboard TLE4242G LED driver/TLE4309 Drive high-power LEDs (1W, 3W) with the BCR 450 –– Max. supply voltage: 27V –– BCR 450 + 3 different transistors for currents up to 2A –– BAS 3007A-RPP Schottky Diode for Reverse Polarity Protection –– Can be connected to a string of LEDs –– PWM signal can be applied SP000417098 LED driver BCR 450 BCR 450 board Demoboard TLE8366 DC/DC converter TLE 4309 TLE 4242G LED driver demo board This application board enables you to test the performance of the TLE 8366 basic buck converter. It is equipped with a TLE 8366EV for variable output voltages (preadjusted to 4.8V). The board offers several possibilities to modify the schematic and also the possibility to drive LEDs. LED driver 23 Lighting & LED Driver Board Name BCR 402W 12V LED board Products Description Order No. BCR 402W The BCR 402W is an ideal drop-in replacement for resistorbased channel letter solutions: –– 12V supply voltage, 20mA preset LED current –– Footprint for external resistor for adjusting LED current –– Footprint for Schottky diodes (can be replaced by jumpers) –– 3 x 0.2W LEDs in series, type: OSRAM TopLED LW T6SG SP000748242 The BCR 402W is an ideal drop-in replacement for resistorbased channel letter solutions: –– 24V supply voltage, 20mA preset LED current –– Footprint for external resistor for adjusting LED current –– Footprint for Schottky diodes (can be replaced by jumpers) –– 6 x 0.2W LEDs in series, type: OSRAM TopLED LWT6SG SP000748244 LED driver BCR 402W BCR 402W 24V LED board LED driver BCR 320U BCR 320U HW LED board LED driver ILD 4035 ILD 4035 MR16 demo board LED driver ILD 4035 ILD 4035 24V board LED driver ILD 4120 ILD 4120 24V board LED driver ILD 4001 ILD 4001 board LED driver ILD 4180 ILD 4180 demo board LED driver ICL 8001G LED driver board with ICL 8001G Control Offline LED driver IC ICE 3B0365JG LED driver board with CoolSET™ 24 Drive 3 x 1W LED Halogen replacement (MR16) lamps with this SP000891904 ready-to-use reference design: –– Equipped with ILD 4035 for 350mA LED current –– 12V DC or AC supply voltage –– 4 BAS 3010A Schottky Diodes for reverse polarity protection –– Including typical MR16 socket pins for instant use in existing designs. Drive 1W LEDs with the buck LED driver ILD 4035: –– 24V and 12V supply voltage version available –– 350mA preset LED current –– Analog voltage and PWM pin for dimming –– Can be connectec to a string of 1W LEDs SP000858450 (24V version) SP000858448 (12V version) Drive 3W LEDs with the buck LED driver ILD 4120: –– 24V and 12V supply voltage version available –– 700mA preset LED current –– Analog voltage and PWM pin for dimming –– Can be connected to a string of 3W LEDs SP000858452 (24V version) SP000858454 (12V version) Drive high power LEDs (1W, 3W, 3W+) with the buck LED controller ILD 4001: –– 24V supply voltage –– Equipped with BSR 302N MOSFET for currents up to 3A –– Analog voltage and PWM pin for dimming –– Can be connected to a string of high power LEDs SP000889588 Drive ultra-high power LEDs with the buck LED driver ILD 4180: –– Up to 45V supply voltage –– LED current adjustable up to 1.8A –– Demo board can be operated in either constant current or constant output voltage mode SP000848474 Demo board using single stage Quasi Resonant Flyback EVAL-LED-ICL8001G-Bulb02 Topology with ICL8001G primary side power control scheme for phase cut dimming applications with high power factor- and efficiency- requirements. 24V/350mA low-cost and highly efficient LED PSU for multiple LEDs. EVALACDC LED-ICE3B0365JG Power control Ics BTS 3256D HITFET™ protected low-side power switch The BCR 320U is the only dedicated 0.5W LED driver on the SP000858442 market. BCR 320U demo board driver features: –– 24V supply voltage –– Constant LED current of 150mA –– BAS 3007A-RPP Schottky Diode for reverse polarity protection –– 6 x 0.5W LEDs, type: OSRAM Advanced Power Topled + Low-side switch Protected low-side power switch (10mΩ at 25°C). This board Demoboard BTS3256D enables easy startup and connectivity for the new power HITFET™ BTS 3256D. Enables easy read out of digital status via LED, and easy slew rate change via variable resistor on board. Lighting & LED Driver Board Name SPIDER (SPI Driver for Enhanced Relay Control) Products Description Order No. TLE 7231G TLE 7233G SPI Driver for Enhanced Relay Control (SPIDER). This board is designed to interface with the universal body control module system evaluation tool. Demoboard TLE7231G/7233G The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7234SE and TLE 7237SL. Demoboard TLE7234/7237 The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7235SE and TLE 7238SL. Demoboard TLE7235/7238 The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7236SE and TLE 7239SL. Demoboard TLE7236/7239 The board is designed to interface with the universal body control module system evaluation tool. The set contains adapter boards for TLE 7240SL, TLE 7243SL and TLE 7244SL. Demoboard TLE724XSL Multi-channel switch TLE 7234EM TLE 7234SE TLE 7237SL SPIDER (SPI Driver for Enhanced Relay Control) Multi-channel switch TLE 7235EM TLE 7235SE TLE 7238SL SPIDER (SPI Driver for Enhanced Relay Control) Multi-channel switch TLE 7236EM TLE 7236SE TLE 7239SL SPIDER (SPI Driver for Enhanced Relay Control) Multi-channel switch TLE 7240SL TLE 7243SL TLE 7244SL SPIDER (SPI Driver for Enhanced Relay Control) Multi-channel switch HIC-PROFET™ BTS 500x0-1EGA For a quick start to lab evaluation, this demo board drives loads such as heating, glow plugs or lamps in 12V DC applications. It uses two devices from the BTS 500x0-1EGA product family, which can be used in parallel and also to drive two independent loads. The board can be used on a standalone basis, but also in combi-nation with power easy kit for High-side switch quick start of software evaluation. PROFET™+ demo board BTS 5020-2EKA BTS 5030-2EKA BTS 5045-2EKA BTS 5090-2EKA BTS 5120-2EKA BTS 5180-2EKA PROFET™+ demo board High-side switch BTS 5590G BTS 5576G BTS 5566G SPOC I - power easy kit Multi-channel switch BTS 5662E BTS 5672E BTS 5682E BTS 5672E BTS 5662E SPOC II - power easy kit Demoboard BTS50050-1EGA Demoboard BTS50060-1EGA Demoboard BTS50070-1EGA Demoboard BTS50080-1EGA This demo board is designed to handle all devices within Demoboard PROFET™+ the PROFET™+ family. It provides the complete external circuitry and testpins for a fully functional setup. Additional functions like internal voltage generation for input pins and the possibility to connect more than one demo board for a test setup are included. The demo board comes with a daughterboard that holds the BTS 5020-2EKA which can be replaced by daughterboards of other PROFET™+ devices . This board is part of the SPOC (SPI power controller for advanced light control) demo kit. The demo kit consists of the power unit and the control unit (XC2287 power easy kit - to be ordered separately). This board is part of the SPOC (SPI power controller for advanced light control) demo kit. The demo kit consists of the power unit and the control unit (XC2287 power easy kit - to be ordered separately). Demoboard BTS5590G BTS5576G BTS5566G Demoboard BTS5662E BTS5672E BTS5682E BTS5672E BTS5662E Multi-channel switch 25 Lighting & LED Driver Board Name SPOC FL - power easy kit Products Description Order No. BTS 6480SF BTS 6460SF BTS 5480SF BTS 5460SF This board is part of the SPOC FL (SPI power controller for advanced front light control) demo kit. Demoboard BTS6480SF BTS6460SF BTS5480SF BTS5460SF Multi-channel switch TLD 5098EL TLD 5098EL Application board DC/DC boost controller TLD 5095EL TLD 5095EL demo board DC/DC boost controller TLD 5098EL TLD 5098EL demo board DC/DC boost controller TLD 5085 TLD 5085 demo board DC/DC buck converter TLD 5085 TLD 5085 Application board with LED 26 Demoboard TLD5098EL This board with the TLD 5085 buck converter is equipped with Demoboard TLD5085 LEDs or can be used via jumper-seeting with external LED loads up to 1.8A. This board with the TLD 5085 buck converter is equipped with one LED or can be used with external LED loads up to 1.8A. Application Board TLD5085 with LED This board with the TLD 5085 buck converter is equipped with a connector to drive external LED loads up to 1.8A. Application Board TLD5085 with Connector Demo board for fluorescent lamp ballast with smart ballast controller 2nd generation ICB 2FL01G for 1x54W T5 lamp. EVAL board ICB2FL01G Demo board for dimmable fluorescent lamp ballast with smart ballast controller 2nd generation ICB 2FL02G for 1x26W TC-TEL lamp. EVAL board ICB2FL02G Demo board for fluorescent lamp ballast with smart ballast controller 1st generation ICB 1FL03G for 1x54W T5 lamp. EVAL board ICB1FL02G Demo board for fluorescent lamp ballast with smart ballast controller 2nd generation ICB 2FL02G for 1x54W T5 lamp. EVAL board ICB2FL02G Demo board for fluorescent lamp ballast with smart ballast controller 1st generation ICB 1FL03G for 1x54W T5 lamp. EVAL board ICB1FL02G Smart ballast controller ICB 1FL03G Evaluation board ICB 1FL03G This board is equipped with TLD 5098EL boost controller, MOSFETs and LEDs or can be used via jumper-seeting with external LED loads up to 1.5A or higher and up to 60V output voltage. Smart ballast controller ICB 2FL02G Evaluation board ICB 2FL02G Demoboard TLD5095EL Smart ballast controller ICB 1FL02G Evaluation board ICB 1FL02G This board is equipped with TLD 5095EL boost controller, MOSFETs and LEDs or can be used via jumper-seeting with external LED loads up to 1.5A or higher and up to 55V output voltage. Smart ballast controller ICB 2FL02G Evaluation board ICB 2FL02G Application Board TLD5098EL DC/DC buck converter ICB 2FL01G Evaluation board ICB 2FL01G This small size DC/DC board is available in the following topologies: –– Boost to battery –– Boost to GND –– SEPIC and can drive LED loads up to 1.5A or higher. DC/DC buck converter TLD 5085 TLD 5085 Application board with connector The demo kit consists of the power unit and the control unit (XC2287 power easy kit - to be ordered separately). Smart ballast controller Microcontroller Board Name 6ED100HP2-FA Products Description Order No. 1ED020I12-FA Driver board for HybridPACK™2 IGBT modules, employing coreless transformer single-channel driver 1ED020I12-FA. IGBT module to be ordered seperately. SP000552868 Driver board for HybridPACK™1 IGBT modules, employing coreless transformer single-channel driver 1ED020I12-FA. IGBT module to be ordered seperately. SP000521526 Complete inverter/DC-DC solution for applications up to 80kW (Full Hybrid Electrical Vehicles) with IGBT module HybridPACK™2 (FS800R07A2E3) 650V/800A, employing coreless transformer isolated driver (1ED020I12-FA) and overvoltage protection (active clamp) SP000635950 Microcontroller 1ED020I12-FA 6ED100HP1-FA Microcontroller 1ED020I12-FA Hybrid-Kit for HybridPACK™2 8-bit microcontroller Automotive Motor Control Consumer Communication Industrial Control & Automation Power Management Lighting & LED Driver 27 Microcontroller Board Name Application KIT FOCDRIVE_V1 Products Description Order No. XC878 XE164F XC878 with vector computer, XE164 real time signal controller with MAC unit. Power board 23V–56V, 7.5A. 15W PMSM motor and plug-in 24V power supply. Using Infineon 6ED003L06 gate driver, BSC 196N10 MOSFETs, CoolSET™ ICE 3B0565 power supply and TLE 4264 LDO. Software package including source code. Sensorless FOC of PMSM with XE164. Sensorless FOC of PMSM with XC878. KIT_AK_FOCDRIVE_V1 8-/16-bit microcontroller XC822T 8-bit Application KIT 7 buttons microcontroller XC822T Application KIT color wheel 28 KIT_AK_BLDC_MDB_V1 12V BLDC (brushless DC) automotive application kit: pp to 20A BLDC motor, inverter, MCU (XC866). Free compiler (SDCC) and debugger (HITOP). Tutorial videos demonstrating how to use the kit. KIT_AK_XC866_BLDC Field-oriented-control (FOC) evaluation kit based on XC886/888 including documentation, ready-to-use FOC software, compiler, debugger, USB-CAN interface, DAVE™ mother system and a 24V PMSM motor. KIT_AK_XC800_FOC_V1 XC878 with vector computer, XE164 real time signal controller with MAC unit. Power board 23–56V, 7.5A. 15W PMSM motor and plug-in 24V power supply. Using Infineon 6ED003L06 gate driver, BSC 196N10 MOSFETs, CoolSET™ ICE 3B0565 power supply and TLE 4264 LDO. Software package including source code. Sensorless FOC of PMSM with XE164. Sensorless FOC of PMSM with XC878. KIT_AK_FOCDRIVE_V1 8-bit microcontroller XC878 XE164F Application KIT FOCDRIVE_V1 Motor control demo kit for block commutation (20 ~ 45V, 0 ~ 16A) on BLDC motors. 8-bit microcontroller XC886 Application KIT XC800_FOC_V1 KIT_AK_XC866_LIN_STEPPER 8-bit microcontroller XC866 Application KIT BLDC XC866 LIN stepper motor kit: to jump start stepper motor design and provide an introduction to the Local Interconnect Network (LIN) protocol, Infineon offers the XC866 LIN stepper motor application kit. 8-bit microcontroller XC866 Application KIT BLDC_MDB_V1 Solution for touch and LED-color control based on XC822T KIT_AK_INTOUCHCW 8-bit microcontroller with embedded control ROM-library. Code examples and documentation for capacitive touch wheel and LED-color control. DAVE™ Bench free development tool chain. Programmer access and power supply via USB. 8-bit microcontroller XC866 Application KIT XC866_LIN_STEPPER Solution for touch and LED-display control based on XC822T KIT_AK_INTOUCH7B 8-bit microcontroller with embedded control ROM-library. Code examples and documentation for capacitive touch buttons and LED-display control. DAVE™ Bench free development tool chain. Programmer access and power supply via USB. 8-/16-bit microcontroller Microcontroller Board Name Application KIT DaveDrive_V3 Products Description Order No. XC878 XE164 Scalable low voltage PMSM motor driver kit with DAVE™ Drive auto code generator. Uses the full power of Infineon microcontrollers, e.g. it generates optimized FOC code for XC878 using a vector computer and XE164 with MAC unit supporting single cycle 16 x 16-bit multiplication and accumulation. This usually requires expert knowledge in both motor control and assembler programming. KIT_AK_DaveDrive_V3 XC878 with vector computer, XE164 real time signal controller with MAC unit. Power board 23–56V, 7.5A. 15W PMSM motor and plug-in 24V power supply. Using Infineon 6ED003L06 gate driver, BSC 196N10 MOSFETs, CoolSET™ ICE 3B0565 power supply and TLE 4264 LDO. Software package including source code. Simultaneous control of two PMSMs with sensorless FOC & digital PFC with XE164. Sensorless FOC & digital PFC with XC878. V/f control of ACIM for quick evaluation. KIT_AK_2MOTORDRIVE_V1 3-phase drive application kit: 0.75kW power stage for consumer and industrial drives, XC886 motor control unit with molded CIPOS™ module and integrated AC/DC converter. Seperately application kit for PMSM/BLDC and induction motors (110 and 220V). KIT_AK_3PHASE_DRIVE_V1 Key features: scalable 3-phase inverter, example code: FOC & V/f for XC886 and XC2238N, Integrated protection features for high system reliability, complete IDE software packages included, easy installation, plug & play included: TLE 7184F power board (12V...24V/20A), BLDC/PMSM motor, AC/ DC powersupply (12V/2A), XC886 (8-bit) drivecard with 16-bit, arithmetic, XC2238N (16-bit) drive card, capable of running FOC code, USB drive-monitor, CD-Rom with software & documentation, cables and connectors - automotive application. KIT_AK_TLE7184_V1 8-/16-bit microcontroller XC878 XE164F Application KIT DUALMOTORDRIVE_V1 8-/16-bit microcontroller XC886 Application KIT 3PHASE_DRIVE_V1 8-bit microcontroller XC886 XC2238N Application KIT BLDC_MOTORDRIVE_V1 8-/16-bit micocontroller XE164 Extension-Board for the UConnect XE164 with a 320*240 OLED KIT_OLED_UConnect 24-bit color display and Ethernet-Connection, CAN and UART connector. Extension-Board KIT 16-bit OLED_UCONNECT_XE164 microcontroller XC822 XE164 USB KIT IOLINK_USB_V1 IO-Link evaluation kit: 16-bit real-time signal controller - hardware support for up to 10 IO-Link channels with FIFO buffer for each channel - CAN, ADC, PWM, timers - IO-Link master. 8-bit microcontoller- Slave IO-Link for intelligent control nodes - CAN, ADC, PWM, timers. KIT_IOLINK_USB_V1 The XC800 USCALE kit is a low cost USB stick providing full evaluation capability for the XC866, XC886 and XC888 8-bit family of microcontrollers, all on a single platform. The kit includes development toolchains, demos and tutorials for quick installation and ease of use as well as access to the key features and hardware signals of each of the three microcontrollers for more extensive benchmarking and evaluation. KIT_XC800_USCALE_USB 8-/16-bit microcontoller XC866 XC886 XC888 USB KIT XC800_USCALE_USB 8-bit microcontroller Automotive Motor Control Consumer Communication Industrial Control & Automation Power Management Lighting & LED Driver 29 Microcontroller Board Name USB KIT UCONNECT_XE162N Products Description Order No. XE162N The UConnect XE162N is a low cost USB stick providing full evaluation capability for the new XE166 16-bit family of microcontrollers. The kit includes development toolchains, demos, a CANopen EVA version and tutorials for quick installation and ease of. The UConnect USB stick comes with a CAN extension board. KIT_XE162N_UConnect_USB The UConnect XC2238N/XC2336B/XC2734X are low cost USB sticks providing full evaluation capability for the XC2000 16-bit family of microntrollers. The kit includes development toolchains, demos, a CANopen EVA version and tutorials for quick installation and ease of. The UConnect USB stick comes with a CAN extension board. KIT_XC2200N_UConnect_USB KIT_XC2300B_UConnect_USB KIT_XC2704X_UConnect_USB The miniWiggler is Infineon’s high performance and costefficient debugging tool for the future. On the host side, it has a USB interface, which is available on every computer. On the device side, the communication goes over Infineon 10-pin DAP or 16-pin OCDSL1 interfaces. The miniWiggler has been designed specifically to work in combination with Infineon’s Debug Access Software (DAS). KIT_DAP_MINIWIGGLER_USB 16-bit microcontroller XC2238N XC2336B XC2734X USB KIT UCONNECT_ XC2000 Family 16-bit microcontroller Debugging tool for all microcontrollers supporting the DAP interface USB KIT DAP_MINIWIGGLER 8-/16-/32-bit microcontroller XC822 Easy KIT XC82x 8-bit microcontroller XC835 XC836 Easy KIT XC83x 30 For evaluation of XC864/XC878 including documentation, compiler, debugger, operating system, parallel cable and one extension board. KIT_XC864_EK_V1 KIT_XC878_EK_V1 For evaluation of XC866 including documentation, compiler, debugger and DAVE™ mother system v2.1. KIT_XC866_EK For evaluation of XC164CM/XC164CS including documentation, compiler, debugger, DAVE™ mother system v2.1 and a flash programming tool. KIT_XC164CM_EK_V3 KIT_XC164CS_EK_V3 8-bit microcontroller XC164CM XC164CS Easy KIT XC164Cx_V3 KIT_XC836_EK_V1 8-bit microcontroller XC866 Easy KIT XC866 For evaluation of XC835 and XC836 microcontrollers; including USB cable, capacitive touch pads, LED display and CD-ROM with technical documentation (user manual, data sheets, board documentation, Errata sheets), DAVE™ Bench free development tool chain (compiler, debugger, flash loader) and application code examples with hands on trainings. 8-bit microcontroller XC864 XC878 Easy KIT XC8xx_V1 For evaluation of XC822 microcontroller; including USB cable, KIT_XC822_EK_V1 high power LED module, boost converter, capacitive touch pads and CD-ROM with technical documentation (user manual, data sheets, board documentation, Errata sheets), DAVE™ Bench free development tool chain (compiler, debugger, flash loader) and application code examples with hands on trainings. 16-bit microcontroller Microcontroller Board Name Easy KIT XC167CI_V3 Products Description Order No. XC167CI For evaluation of XC167CI including documentation, compiler, debugger, DAVE™ mother system v2.1 and a flash programming tool. KIT_XC167CI_EK_V3 For evaluation of XE164/XE167 including documentation, compiler, debugger, DAVE™ mother system v2.1 and a flash programming tool. KIT_XE164F_EK_V1 KIT_XE167F_EK_V1 For evaluation of XE167FH/XE169FH including Getting Started, DAVE™ , technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging. KIT_XE167FH_EK_V1 KIT_XE169FH_EK_V1 For evaluation of XE161FL/XE162FL including Getting Started, DAVE™ , technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging. KIT_XE161FL_EK KIT_XE162FL_EK For evaluation of XE162FM/XE164FM/XE167FM including Getting Started, DAVE™ , technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging. KIT_XE162FM_EK_V1 KIT_XE164FM_EK_V1 KIT_XE167FM_EK_V1 For evaluation of XE162FN/XE164FN including Getting Started, DAVE™ , technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and Flash programming and debugging. KIT_XE162FN_EK_V1 KIT_XE164FN_EK_V1 For evaluation of XE160FU/XE161FU including Getting Started DAVE™, technical documentation, compiler and debugger, USB cable for power supply, virtual COM port and flash programming and debugging. KIT_XE160FU_EK KIT_XE161FU_EK For evaluation of C515 including documentation, compiler and debugger. KIT_C515C_SK 16-bit microcontroller XE164F XE167F Easy KIT XE16Xx classic series 16-bit microcontroller XE167FH XE169FH Easy KIT XE16xFH_V1 16-bit microcontroller XE161FL XE162FL Easy KIT XE16xFL 16-bit microcontroller XE162FM XE164FM XE167FM Easy KIT XE16xFM_V1 16-bit microcontroller XE162FN XE164FN Easy KIT XE16xFN_V1 16-bit microcontroller XE160FU XE161FU Easy KIT XE16xFU 16-bit microcontroller C515C Starter KIT C515C 8-bit microcontroller Automotive Motor Control Consumer Communication Industrial Control & Automation Power Management Lighting & LED Driver 31 Microcontroller Board Name Starter KIT XC8xx Products Description Order No. XC866 XC886 XC888 For evaluation of XC866/XC886/XC888 including documentation, compiler, debugger, DAVE™ mother system v2.1, cables and U-link. KIT_XC866_SK KIT_XC888_SK For evaluation of C167CS including documentation, compiler and debugger. KIT_C167CS_SK For evaluation of XC2267/XC2287 including Getting Started, DAVE™, technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and Flash programming and debugging. KIT_XC2267_SK KIT_XC2287_SK For evaluation of XC2210U/XC2220U including Getting Started, DAVE™, technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging. KIT_XC2210U_SK KIT_XC2220U_SK For evaluation of XC2220L/XC2224L/XC2230L/XC2234L including Getting Started, DAVE™, technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging. KIT_XC222xL_SK KIT_XC223xL_SK For evaluation of XC2237M/XC2267M/XC2287M including Getting Started, DAVE™, technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging. KIT_XC2237M_SK KIT_XC2267M_SK KIT_XC2287M_SK For evaluation of XC2288H/XC2298H including Getting Started, DAVE™, technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging. KIT_XC2288H_SK KIT_XC2298H_SK For evaluation of XC2238N/XC2268N including Getting Started, DAVE™, technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging. KIT_XC2238N_SK KIT_XC2268N_SK 8-bit microcontroller C167CS Starter KIT C167CS 16-bit microcontroller XC2267 XC2287 Starter KIT XC22x7classic series 16-bit microcontroller XC2210U XC2220U Starter KIT XC22x0U 16-bit microcontroller XC222xL XC223xL Starter KIT XC22xxL 16-bit microcontroller XC2237M XC2267M XC2287M Starter KIT XC22x7M Series 16-bit microcontroller XC2288H XC2298H Starter KIT XC22x8H Series 16-bit microcontroller XC2238N XC2268N Starter KIT XC22x8N Series 32 16-bit microcontroller Microcontroller Board Name Starter KIT XC23xxA Products Description Order No. XC2336A XC2365A XC2387A For evaluation of XC2336A/XC2365A/XC2387A including Getting Started, DAVE™, technical docu-mentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging. KIT_XC2336A_SK KIT_XC2365A_SK KIT_XC2387A_SK 16-bit microcontroller XC2336B XC2365B Starter KIT XC23xxB 16-bit microcontroller XC232xD XC233xD Starter KIT XC23xxD KIT_XC2388C_SK For evaluation of XC2712X/XC2722X including Getting Started, KIT_XC2712X_SK DAVE™, technical documentation, compiler and debugger. KIT_XC2722X_SK USB cable for power supply, virtual COM port and flash programming and debugging. For evaluation of XC2723X/XC2733X including Getting Started, KIT_XC2723X_SK DAVE™, technical documentation, compiler and debugger. KIT_XC2733X_SK USB cable for power supply, virtual COM port and flash programming and debugging. 16-bit microcontroller XC2734X XC2764X Starter KIT XC27x4X For evaluation of XC2388C including Getting Started, DAVE™, technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging. 16-bit microcontroller XC2723X_SK XC2733X_SK Starter KIT_XC27x3X For evaluation of XC2310S/XC2320S including Getting Started, KIT_XC2310S_SK DAVE™, technical documentation, compiler and debugger. KIT_XC2320S_SK USB cable for power supply, virtual COM port and flash programming and debugging. 16-bit microcontroller XC2712X XC2722X Starter KIT XC27x2X KIT_XC232xD_SK KIT_XC233xD_SK 16-bit microcontroller XC2388C Starter KIT XC2388C For evaluation of XC2320D/XC2321D/XC2330D/XC2331D including Getting Started, DAVE™, technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging. 16-bit microcontroller XC2310S XC2320S Starter KIT XC23X0S For evaluation of XC2336B/XC2365B including Getting Started, KIT_XC2336B_SK DAVE™, technical documentation, compiler and debugger. KIT_XC2365B_SK USB cable for power supply, virtual COM port and flash programming and debugging. For evaluation of XC2734X/XC2764X including Getting Started, KIT_XC2734X_SK DAVE™, technical documentation, compiler and debugger. KIT_XC2764X_SK USB cable for power supply, virtual COM port and flash programming and debugging. 16-bit microcontroller Automotive Motor Control Consumer Communication Industrial Control & Automation Power Management Lighting & LED Driver 33 Microcontroller Board Name Starter KIT XC27x5X Products Description XC2765X XC2785X For evaluation of XC2765X/XC2785X including Getting Started, KIT_XC2765X_SK DAVE™, technical documentation, compiler and debugger. KIT_XC2785X_SK USB cable for power supply, virtual COM port and flash programming and debugging. 16-bit microcontroller XC2766X XC2786X Starter KIT XC27x6X 34 For evaluation of TC1766 including documentation, compiler, debugger, operating system, parallel cable and one extension board. KIT_TC1766_SK For evaluation of TC1796 including documentation, compiler, debugger, operating system, parallel cable and one extension board. KIT_TC1796_SK For evaluation of TC1167/TC1767 including Getting Started, technical documentation, evaluation versions for compiler and debugger, USB cable, power supply and extension board. KIT_TC1767_SK For evaluation kit for the TC1197/TC1797 including Getting Started, technical documentation, evaluation versions for compiler and debugger, USB cable, power supply and extension board. KIT_TC1797_SK 32-bit microcontroller TC1197 TC1797 Starter KIT TC1797 KIT_TC116x_SK 32-bit microcontroller TC1167 TC1767 Starter KIT TC1767 For evaluation of TC1164/TC1166 including documentation, compiler, debugger, operating system, cable and one extension board. 32-bit microcontroller TC1796 Starter KIT TC1796 KIT_TC1130_SK_V1.5 32-bit microcontroller TC1766 Starter KIT TC1766 For evaluation of TC1130 including Getting Started, technical documentation, evaluation versions for compiler and debugger. cable, power supply and extension board. 32-bit microcontroller TC1164 TC1166 Starter KIT TC116x For evaluation of XC2787X/XC2797X including Getting Started, KIT_XC2787X_SK DAVE™, technical documentation, compiler and debugger. KIT_XC2797X_SK USB cable for power supply, virtual COM port and flash programming and debugging. 16-bit microcontroller TC1130 Starter KIT TC1130_V1.5 For evaluation of XC2766X/XC2786X including Getting Started, KIT_XC2766X_SK DAVE™, technical documentation, compiler and debugger. KIT_XC2786X_SK USB cable for power supply, virtual COM port and flash programming and debugging. 16-bit microcontroller XC2787X XC2797X Starter KIT XC27x7X Order No. 32-bit microcontroller RF & Protection Devices Board Name BFP 540ESD Evalboard Products Description Order No. BFP 540ESD A low-cost, low-current broadband UHF low noise amplifier with the ESD-robust BFP 540ESD RF transistor. BFP540ESD board This board shows the ESD-robust BFR 460L3 board in ISM and RKE applications, as well as wideband LNA. Please specify the applications in your order. BFR460L3 board A low-cost, low-noise amplifier for 315 and 434MHz RKE applications using the ESD-robust BFP 460 RF transistor. BFP460 board This board shows BFR 360L3 in different ISM-band applications for <1GHz. It is also available for BFR 340L3 and BFR 380L3, as well BFR 340F/BFR 360F/BFR 380F in TSFP package. Please specify the applications and the transistor in your order. BFR360L3 board BFR380F board BFR360F board BFR340F board RF transistor BFR 460L3 BFR 460L3 Evalboard RF transistor BFP 460 BFP 460 Evalboard RF transistor BFR 300 Family BFR 360L3 Evalboard RF transistor Automotive Motor Control Consumer Communication Industrial Control & Automation Power Management Lighting & LED Driver 35 RF & Protection Devices Board Name BFR 182 board Products Description Order No. BFR 182 Low-cost RKE transmitter using BFR 182. BFR182 board Evaluation board for ESD 24VS2U TVS, 2-channel unidirectional diode designed for ESD/transient protection of LIN/CAN-bus and other industrial applications. ESD24VS2U BOARD RF transistor ESD 24VS2U ESD 24VS2U Board ESD & EMI protection BGT 24 Evaluation board for BGT 24, single chip transceiver for 24GHz 24GHz ISM band ISM band 24.0GHz - 24.25GHz. Target applications are 24GHz radar frontend for security control, industrial level sensors, motion sensors. This transceiver chipset features very low power consumption, fine/coarse tuning, SPI interface, etc. BGT 24 TRX Board Transceiver BFP 405 BFP 405 eval board 36 This board shows BFP 640 in LNA applications. Please specify the frequency (range) in your order. For higher ESD robustness, please try our latest BFP 640ESD. BFP640 board BFP640ESD board This board shows BFP 450 in LNA applications. Please specify the frequency (range) in your order. BFP450 board The BFP 520 transistor as a low-cost 1900MHz LNA. BFP520 board This board shows new SiGe:C RF-transistor BFP 720 (SOT343 package) in LNA applications. NF of 0.5dB possible. Please specify the frequency (range) in your order. For higher ESD robustness, please try out latest BFP 720ESD. BFP720 board BFP720ESD board This board shows new SiGe:C RF-transistor BFP 720F (TSFP-4 package) in LNA applications. NF of 0.5dB possible. Please specify the frequency (range) in your order. For higher ESD robustness, please try out latest BFP 720FESD. BFP720F board BFP720FESD board RF transistor BFP 720F BFP 720F(ESD) board BFP420 board RF transistor BFP 720 BFP 720(ESD) board This board shows BFP 420 in LNA applications. Please specify the frequency (range) in your order. RF transistor BFP 520 BFP 520 board BFP405F board RF transistor BFP 450 BFP 450 eval board This board shows BFP 405F in LNA applications. Please specify the frequency (range) in your order. RF transistor BFP 640 BFP 640ESD BFP 640(ESD) eval board BFP405 board RF transistor BFP 420 BFP 420 eval board This board shows BFP 405 in LNA applications. Please specify the frequency (range) in your order. RF transistor BFP 405F BFP 405F eval board BGT24TRX BOARD SP000897748 RF transistor RF & Protection Devices Board Name BFR 720L3RH board Products Description Order No. BFR 720L3RH This board shows new SiGe:C RF-transistor BFR 720L3RH (TSLP-3 package only 0.32 mm in height!) in LNA applications. NF of 0.5dB possible. Please specify the frequency (range) in your order. BFR720L3RH This board shows BFP 740 in LNA applications. Please specify the frequency (range) in your order. For higher ESD robustness, please try our latest BFP 740ESD. BFP740 board BFP740ESD board This board shows BFP 740F in LNA applications. Please specify the frequency (range) in your order. For higher ESD robustness, please try our latest BFP 740FESD. BFP740F board BFP 740FESD board Evaluation board for BFR 740L3RH. This board is designed as a wide-band LNA. It covers the range from 900MHz up to 6GHz. BFR740L3RH board This board shows BFP 640F in LNA applications. Please specify the frequency (range) in your order. For higher ESD robustness, please try our latest BFP 640FESD. BFP640F board BFP640FESD board PCS, GPS, Bluetooth, 2.4GHz WLAN, SDARS LNA (2-stage 6GHz WLAN LNA). This board shows BFP 650 in LNA applications. Please specify the frequency (range) in your order. BFP650 board This board shows BFP 650F in LNA applications. Please specify the frequency (range) in your order. BFP650F board Evaluation board for ESD 1P0RF diode series. These diodes with 1pF capacitance are designed to protect RF lines. Available in SOT363 (ESD 1P0RFS) and SOT323 (ESD 1P0RFW) packages. ESD1P0RFW BOARD ESD1P0RFS BOARD This board shows new SiGe:C wideband MMIC BGB 707L7ESD (ultra low noise, power-off function, current adjust, frequency range 50MHz - 5.5GHz, TSLP-7-1 package) in LNA applications. NF of < 1.0dB possible. Please specify the frequency (range) in your order. BGB707L7ESD board This board shows new SiGe:C wideband MMIC BGB 717L7ESD (ultra low noise, power-off, frequency range 50MHz-5.5GHz, current 3mA, TSLP-7-1 package) in LNA applications. NF of < 1.0dB possible. Please specify the frequency (range) in your order. BGB717L7ESD board RF transistor BFP 740 BFP 740(ESD) board RF transistor BFP 740F BFP 740F(ESD) board RF transistor BFR 740L3RH BFP 740L3H eval board RF transistor BFP 640F BFP 640F(ESD) board RF transistor BFP 650 BFP 650 eval board Transistor BFP 650F BFP 650F eval board RF transistor ESD 1P0RFW ESD 1P0RFS ESD 1P0RF series evaluation boards ESD & EMI protection BGB 707L7ESD BGB 707L7ESD board RF MMIC BGB 717L7ESD BGB 717L7ESD board RF MMIC BGB 741L7ESD BGB 741L7ESD board RF MMIC Automotive Motor Control Consumer Communication This board shows new SiGe:C broadband MMIC BGB 741L7ESD BGB741L7ESD board (low noise, 4kV at RF_in, power-off, current adjust, integrated feedback, supporting up to 4GHz, TSLP-7-1 package) in LNA applications. NF of 1.0dB possible. Please specify the frequency (range) in your order. Industrial Control & Automation Power Management Lighting & LED Driver 37 RF & Protection Devices Board Name BGA 461 board Products Description Order No. BGA 461 Evaluation board for BGA 461. BGA 461 is a low-cost lowcurrent LNA MMIC for GPS application, gain 19.5dB, NF 1.1dB, Icc 4mA. BGA461 board RF MMIC BGA 615L7 BGA 615L7 board RF MMIC BGA 715L7 BGA 715L7 board RF switch BGS 12AL7-6 BGS 12AL7-6 eval board 38 BGM1033N7 board Evaluation board for BGM 781N11. BGM 781N11 is a GPS FEM LNA MMIC with pre-filter, LNA and post-filter integrated in one package. TR138, TR139, TR143, TR144, TR145, AN184. BGM781N11 board High power SP5T RF switch for WCDMA diversity applications with integrated CMOS logic. Handles up to 30dBm. BGS15AN16 board SP8T antenna switch module with integrated SPI controller, 2 GSM-Tx and 6 WCDMA-TRx ports for 2G/3G convergence. BGSF18D board SP3T + SP5T antenna switch module with integrated SPI controller, 2 GSM-Tx and 6 WCDMA-TRx ports fro 2G/3G convergence. BGSF28D board A medium power RF SPDT switch in super small 0.79 x 0.54mm² chip-sale package for medium power wireless applications up to 2.5GHz. Can be used for example as band select switch, antenna diversity switch, bypass switch or Rx-Tx switch. BGS12A board RF switch BGS 12A BGS 12A eval board GPS and GLONASS front-end module including low insertion loss pre-filter and LNA. 1.7dB NF, 14.5 dB gain. RF switch BGS F28D BGS F28D board BGM732N16 board RF switch BGS F18D BGS F18D board GPS front-end module including a low insertion loss pre-filter and an LNA. 1.7dB NF, 18dB gain. RF MMIC BGS 15AN16 BGS 15AN16 board BGA231L7 board RF MMIC BGM 781N11 BGM 781N11 board GPS LNA, replaces Avago MGA231T6. NF: 0.7dB, Gain: 16dB, IIP3: -1dBm. RF MMIC BGM 1033N7 BGM 1033N7 board BGA915N7 board RF MMIC BGM 732N16 BGM 732N16 board GPS LNA offering excellent linearity (+10dBm IIP3), low noise figure (0.7dB), medium gain (15.5dB) and a very small package (1.5mm2) RF MMIC BGA 231L7 BGA 231L7 board Evaluation board for BGA 715L7. BGA 715L7 is a best-in-class BGA715L7 board LNA MMIC for GPS application, gain 20dB, NF 0.6dB or 0.75dB. Please specify the version in your order. AN161. RF MMIC BGA 915N7 BGA 915N7 board Evaluation board for BGA 615L7. BGA 615L7 is a high-gain low- BGA615L7 board noise LNA MMIC for GPS with a NF of only 0.9dB. AN91. RF switch A medium power RF SPDT switch in tiny 1.4 x 1.26mm² TSLP7-6 BGS12AL7-6 board package for medium power wireless applications up to 2.5GHz. Can be used for example as band select switch, antenna diversity switch, bypass switch or Rx-Tx switch. RF & Protection Devices Board Name BGS 12AL7-4 eval board Products Description BGS 12AL7-4 A medium power RF SPDT switch in 2.3 x 1.5mm² TSLP7-4 BGS12AL7-4 board package for medium power wireless applications up to 2.5GHz. Can be used for example as band select switch, antenna diversity switch, bypass switch or Rx-Tx switch. RF switch BGA 728L7 BGA 728L7 board RF MMIC BGA 751L7 BGA 751L7 eval board RF MMIC BGA 777L7 BGA 777L7 eval board BGA749N16 board Single UMTS LNA for the low bands (700MHz - 900MHz range). Offers two gain modes and an on/off controll pin. BGA713L7 board Evaluation board for BGA 711L7 is a single wide-band UMTS LNA covering all frequencies 1.85 ... 2.62GHz. It provides two gain mo-des and on/off function and supports the transceiver with a data rate of 14.4Mbits/s. BGA711L7 board Evaluation board for BGA 751L7. BGA 751L7 is a single-band UMTS LNA for band V/VI. It provides two gain-levels and on/ off function, supports the transceiver with the date rate of 14.4Mbits/s. BGA751L7 board BGA 777L7 is a low-current, single-band, low-noise amplifier MMIC for UMTS bands 7, 38 and 40 with frequency range 2.3 – 2.7GHz. BGA777L7 board BGA 758L7 is a low noise amplifier MMIC for 5-6GHz WLAN application, in tiny TSLP-7-8 package. BGA758L7 board BGA 628L7 is a wide-band low-noise amplifier MMIC with operating frequency range of 0.4 - 6GHz, in tiny TSLP-7-8 package. TR152. BGA628L7 board RF MMIC BGA 628L7 BGA 628L7 eval board UMTS quad-band LNA with two high bands, one mid band and one low band LNA. It provides two gain levels and an on/off control pin. RF MMIC BGA 758L7 BGA 758L7 eval board BGA748N16 board RF MMIC BGA 711L7 BGA 711L7 eval board Quad-band UMTS LNA with one high band, one mid band and two low band LNAs. It provides two gain levels and an on/off control pin. RF MMIC BGA 713L7 BGA 713L7 board Evaluation board for BGA 736L16. BGA 736L16 is a triple-band BGA736L16 board UMTS LNA with adjustable band combination. It provides three gain levels and on/off function and supports the transceiver with a data rate of 7.2Mbits/s. RF MMIC BGA 749N16 BGA 749N16 board Evaluation board for BGA 735L16. BGA 736L16 is a triple-band BGA735N16 board UMTS LNA with adjustable band combination. It provides two gain modes and on/off function and supports the transceiver with a data rate of 14.4Mbits/s. RF MMIC BGA 748N16 BGA 748N16 board Evaluation board for BGA 734L16. BGA 734L16 is a triple-band BGA734L16 board UMTS LNA with adjustable band combination. It provides two gain modes and on/off function and supports the transceiver with a date rate of 3.6Mbits/s. RF MMIC BGA 736L16 BGA 736L16 eval board BGA728L7 board RF MMIC BGA 735L16 BGA 735N16 eval board Evaluation board for BGA 728L7. BGA 728L7 is a broadband low noise amplifier for portable and mobile TV applications. This board is available for UHF and ‘UHF+VHF‘. Please specify the version in your order. AN163. RF MMIC BGA 734L16 BGA 734L16 eval board Order No. RF MMIC Automotive Motor Control Consumer Communication Industrial Control & Automation Power Management Lighting & LED Driver 39 RF & Protection Devices Board Name BGA 622L7 eval board Products Description BGA 622L7 Evaluation board for BGA 622L7. BGA 622L7 is a multi-purpose BGA622L7 board LNA MMIC. This board is available for GPS or 1.8 – 2.4GHz applications. Please specify the version in your order. AN89&90. RF MMIC BGA 622 BGA 622 eval board 40 BGA 616 is a broadband MMIC amplifier, its input and output are matched to 50Ω. Excellent linearity performance make it suitable as a driver amplifier or in CATV applications. BGA616 board ESD and EMI protection (audio filter) for differential microphone interfaces. BGF100 board ESD and EMI filter array for high-speed multi-media card (HSMMC). BGF104 board ESD and EMI filter 10-channel array for LCD interface. BGF109 board ESD and EMI protection (audio filter) for single-ended microphone interface. BGF200 board Evaluation board for BGA 616. BGA 616 is one of our general pur-pose 50 T gain-block family. Boards for BGA 612 and BGA 614 are available in ISAR as well. BGA616 board ESD & EMI protection BGA 616 BGA 616 eval board BGA614 board ESD & EMI protection BGF 200 BGF 200 HiPAC eval board BGA 614 is a broadband MMIC amplifier, input and output are matched to 50Ω. Excellent linearity performance make it suitable as a driver amplifier or for CATV applications. Gain: 19dB, OP1dB: 12dBm, OIP3: 25Bm. ESD & EMI protection BGF 109C BGF 109C HiPAC eval board BGA612 board ESD & EMI protection BGF 104C BGF 104C HiPAC eval board BGA 612 is a broadband MMIC amplifier with input and output matched to 50Ω. I can be used e.g. as a driver amplifier. Gain: 18dB, OP1dB: 7 dBm, OIP3: 17dBm. RF MMIC BGF 100 BGF 104C HiPAC eval board BGA428 board RF MMIC BGA 616 BGA 616 board Evaluation board for BGA 428. BGA 428 is a low-cost LNA MMIC. This board is available for GPS and 1900MHz applications. Please specify the version in your order. AN62. RF MMIC BGA 614 BGA 614 board BGA622 board RF MMIC BGA 612 BGA 612 board Evaluation board for BGA 622. BGA 622 is a low-cost multi-pur-pose LNA MMIC. This board is available for GPS or 1.8 – 2.4GHz applications. Please specify the version in your order. AN69. RF MMIC BGA 428 BGA 428 eval board Order No. RF MMIC RF & Protection Devices Board Name Products Description Order No. ESD 8V0 series Evaluation board for the ESD 8V0 bidirectional diode series. Recommended TVS diode series for ESD protection of general purpose applications (keypad, keyboard, buttons, power line) and audio/headset lines. These ESD protection diodes are available in 0201 or 0402 packages either for single- or dual-channel protection. Please select the board version accordingly. ESD8V0L1B-02EL BOARD (1-line, 0402) ESD8V0R1B-02EL BOARD (1-line, 0402) ESD8V0R1B-02ELS BOARD (1-line, 0201) ESD8V0L2B-03LRH BOARD (2-lines, 0402) ESD 8V0 series eval board ESD & EMI protection ESD 5V0S series evaluation board ESD 5V0S Series Evaluation board for ESD 5V0S series TVS-protection diodes. ESD5V0S2U-06 BOARD These diodes (ESD 5V0S2U-06, ESD 5V0S4US, ESD 5V0S5US) ESD5V0S4US BOARD are available in different leaded packages for single- or multiESD5V0S5US BOARD channel protection. Recommended for ESD/surge protection in general purpose and power line applications. Please select the ESD & EMI board version accordingly. protection ESD 0P2RF ESD 0P2RF- series evaluation boards ESD & EMI protection ESD 5V3U1USeries ESD 5V3U1U series evaluation board ESD & EMI protection ESD 3V3U1USeries ESD 3V3U1U- series evaluation board ESD & EMI protection ESD 5V3U2USeries ESD 5V3U2U-series evaluation board ESD & EMI protection ESD 3V3U4ULC ESD 3V3U4ULC evaluation board ESD & EMI protection ESD 5V3U4RRS ESD 5V3U4RRS evaluation board ESD protection for RF antennas using Infineon ESD 0P4RFL with ESD0P4RFL BOARD 0.4pF capacitance. The package is TSLP-4. ESD & EMI protection ESD 5V3S1BSeries ESD 5V3S1B- series evaluation board ESD0P2RF-02LS BOARD (0201) ESD0P2RF-02LRH BOARD (0402) ESD & EMI protection ESD 0P4RFL ESD 0P4RFL evaluation board ESD protection for RF antennas using Infineon ESD 0P2RF. This diode is available in two packages: TSLP-2 (equivalent to EIA 0402) and TSSLP-2 (equivalent to EIA 0201). ESD & EMI protection Automotive Motor Control Consumer Communication ESD protection of audio, speaker and headset lines with ESD 5V3S1B bidirectional diode series. Special feature of this diode is very low clamping voltage for protection of applications operating at a maximum voltage between -5.3V/+5.3V. ESD5V3S1B-02LS BOARD ESD5V3S1B-02LRH BOARD ESD protection of digital high speed interfaces with ESD5V3U1U-02LS BOARD ESD 5V3U1U- diode series. These diodes have ultralow ESD5V3U1U-02LRH BOARD capacitance of 0.4pF (1MHz) and ESD absorption capability of 20 kV exceeding IEC61000-4-2 standard. Enables application in USB2.0, HDMI 1.3, HDMI 1.4, DisplayPort, DVI, etc. Packages are TSLP-2 and TSSLP-2 (equivalent to EIA 0402 and 0201). ESD protection of digital high speed data interfaces with ESD3V3U1U-02LS BOARD single line ESD 3V3U1U- diodes. These diodes have ultralow ESD3V3U1U-02LRH BOARD capacitance of 0.4pF (1MHz) and ESD absorption capability of 20kV exceeding IEC61000-4-2 standard. These diodes are suited for applications with maximum signal voltage of +3.3V. Packages are TSLP-2 and TSSLP-2 (equivalent to EIA 0402 and 0201). ESD protection of digital high speed data interfaces with ESD5V3U2U-03F BOARD ESD 5V3U2U- arrays. These diodes have ultralow capacitance of ESD5V3U2U-03LRH BOARD 0.4pF (1MHz) and ESD absorption capability of 20kV exceeding IEC61000-4-2 standard. Enables protection of two lines with one device in applications like USB2.0, USB3.0, HDMI 1.3, HDMI 1.4, DisplayPort, DVI, etc. Packages are TSLP-3 (equivalent to EIA 0402 for 2-lines protection) and TSFP-3 (2-lines protection). ESD protection of new USB3.0 and other high speed interfaces ESD3V3U4ULC BOARD with ESD 3V3U4ULC array. This diode has ultralow capacitance of 0.4pF (1MHz) and ESD absorption capability of 20kV exceeding IEC61000-4-2 standard. With ultrahin package measuring 2.3x1.0x0.3mm, this diode array enables protection of four lines in applications with signal voltage up to 3.3V. ESD protection of digital high speed data interfaces with ESD 5V3U4RRS array diode. This diode has ultralow capacitance of 0.4pF (1MHz) and ESD absorption capability of 15kV exceeding IEC61000-4-2 standard. It is the perfect solution for easy PCB layout and reduced component count in USB2.0 applications. Package is SOT363. Industrial Control & Automation Power Management ESD5V3U4RRS BOARD Lighting & LED Driver 41 RF & Protection Devices Board Name ESD 5V3U4U-HDMI evaluation board Products Description ESD 5V3U4UHDMI ESD protection of digital high speed data interfaces with ESD5V3U4U-HDMI BOARD ESD 5V3U4U-HDMI array diode in TSLP-9 package (2.3x1.0x 0.3mm). This diode has ultralow capacitance of 0.4pF (1MHz) and ESD absorption capability of 20kV exceeding IEC61000-4-2 standard. Because of flow-through design it is the ideal solution for protection of up to 4 data lines in HDMI and DisplayPort interfaces. Other applications like microSD card protection in slim & small devices greatly benefit from the ultrathin package. For applications whose signal voltage does not exceed 5.3V. ESD & EMI protection DSL 70 DSL 70 evaluation board DSL70 BOARD Evaluation board for ESD 24VS2U, 2-channel unidirectional diode in SOT23 package designed for ESD/transient protection. ESD24VS2U BOARD Evaluation board for ESD 0P8RFL diode for ESD protection of RF antenna lines. ESD 0P8RFL has 0.8pF and ESD absorption capability of up to 20kV exceeding industry's standard IEC61000-4-2. ESD0P8RFL BOARD ESD & EMI protection ESD 0P8RFL ESD 0P8RFL evaluation board ESD and transient protection in ADSL, VDSL and other broadband applications. Preferred solution because of extremely low clamping voltage at high peak currents, lower capacitance and overall superior ESD absorption capability. Package is SOT143. ESD & EMI protection ESD 24VS2U ESD 24VS2U evaluation board ESD & EMI protection ESD 1P0RF Series Evaluation board for ESD 1P0RF diode series. These diodes with 1pF capacitance are designed to protect RF lines. Available in SOT363 (ESD 1P0RFS) and SOT323 (ESD 1P0RFW) packages. ESD 1P0RF series evaluation board ESD & EMI protection BGS 12A BGS 12A eval board RF switch BGS 12AL7-6 BGS 12AL7-6 eval board 42 Evaluation board for ESD 5V3L1U-02LRH. This diode with 1pF capacitance and ESD absorption capability of 30kV (IEC61000-4-2) is designed to protect RF lines in e.g. FM radio applications and also data interfaces. Available in TSLP-2 package (equivalent to EIA 0402). ESD5V3L1U-02LRH BOARD A medium power RF SPDT switch in super small 0.79 x 0.54mm² chip-sale package for medium power wireless applications up to 2.5GHz. Can be used for example as band select switch, antenna diversity switch, bypass switch or Rx-Tx switch. BGS12A board A medium power RF SPDT switch in tiny 1.4 x 1.26mm² TSLP7-6 BGS12AL7-6 board package for medium power wireless applications up to 2.5GHz. Can be used for example as band select switch, antenna diversity switch, bypass switch or Rx-Tx switch. RF switch BGS 12AL7-4 BGS 12AL7-4 eval board ESD5V0L1B-02V BOARD ESD5V0L1U-02V BOARD ESD & EMI protection ESD 5V3L1U02LRH ESD 5V3L1U-02LRH evaluation board ESD1P0RFW BOARD ESD1P0RFS BOARD ESD & EMI protection ESD 5V0L1B-02V ESD protection data interfaces and power lines with ESD 5V0L1U-02V ESD 5V0L1- diodes in SC79 package. ESD 5V0L1 series evaluation board Order No. RF switch A medium power RF SPDT switch in 2.3 x 1.5mm² TSLP7-4 BGS12AL7-4 board package for medium power wireless applications up to 2.5GHz. Can be used for example as band select switch, antenna diversity switch, bypass switch or Rx-Tx switch. Wireless Control Board Name Wireless control receiver board Products Description Order No. TDA 7210V Evaluation board for the receiver TDA 7210V (Mipot). PMAfob_TDA7210V_434_Kit The PMAfob RKE demo kit will give you an impression of the capabilities of the SmartLEWIS™ MCU PMA-family in a typical application environment. The kit contains two PMAfob remote control units using SmartLEWIS™ MCU transmitter and one SmartLEWIS™ RX TDA 5230 UWLink stick receiver board. PMAfob_TDA5230_434-USBUWLink Enhanced development tool for the transmitter with microcontroller family PMA 51XX for 315/434/868/915MHz and output power of 5/10dBm. The evaluation board allows access to all pins for detailed measurement and supports the embedded LF receiver and ADC functionality of the SmartLEWIS™ MCU. This PMA evaluation board requires the system interface board (SmartLEWIS™ SIB) or PMA starter kit for connection to a PC. PMA5110-315-5-board PMA5110-434-5-board PMA5110-868-10-board PMA5110-915-10-board SmartLEWIS SIB board Receiver PMA 51XX SmartLEWIS™ PMA-RKE-DEMO KIT Transmitter PMA 51XX SmartLEWIS™ MCU Wireless control transmitter PMA evaluation kit Transmitter Automotive Motor Control Consumer Communication Industrial Control & Automation Power Management Lighting & LED Driver 43 Wireless Control Board Name Wireless control transmitter PMA starter kit Products Description Order No. PMA 51XX SmartLEWIS™ MCU USB stick for evaluation of the transmitter with microcontroller family PMA 51XX for 315/434/868MHz and output power of 5/10dBm. LF receiver and ADC functionality are not supported. PMAx110-315-5-USB-RF KIT PMAx110-434-5-USB-RF KIT PMAx110-868-10-USB-RF KIT Transmitter PMA 71xx SmartLEWIS™ PMAfob Transmitter PMA 71xx SmartLEWIS™ PMA-RKE-DEMO KIT Transmitter PMA 71xx SmartLEWIS™ MCU Wireless control transmitter PMA evaluation kit Transmitter PMA 71xx SmartLEWIS™ MCU Wireless control transmitter PMA starter kit PMAfob_TDA5230_434-USBUWLink Enhanced development tool for the transmitter with microcontroller family PMA 71xx for 315/434/868/915MHz and output power of 5/10dBm. The evaluation board allows access to all pins for detailed measurement and supports the embedded LF receiver and ADC functionality of the SmartLEWIS™ MCU. This PMA evaluation board requires the system interface board (SmartLEWIS™ SIB) or PMA starter kit for connection to a PC. PMA5110-315-5-board PMA5110-434-5-board PMA5110-868-10-board PMA5110-915-10-board SmartLEWIS SIB board USB stick for evaluation of the transmitter with microcontroller family PMA 71xx for 315/434/868MHz and output power of 5/10dBm. LF receiver and ADC functionality are not supported. PMAx110-315-5-USB-RF KIT PMAx110-434-5-USB-RF KIT PMAx110-868-10-USB-RF KIT Evaluation kit for the transmitter TDA 7110, TDA 7110F, TDA 7116F and receiver TDA 7210 or TDA 7210V for 434MHz or 868MHz and output power of 10dBm. TDA7110-TDA7210_868_10 TDA7110F-TDA7210_434_10 TDA7110F-TDA7210V_434_10 TDA7116F-TDA7210V_868_10 Basic control unit to generate CAN-, LIN- and FlexRay datastreams. Plug & play, ready to use system to build up complete CAN-, LIN-, and FlexRay networks. Additional software examples are provi-ded to allow timing measurements and to verify signal integrity. CAN-LIN Universal Demoboard Transmitter TLE 6250G TLE 6251G TLE 6251DS TLE 8250 CAN-LIN transceivers The PMAfob RKE demo kit will give you an impression of the capabilities of the SmartLEWIS™ MCU PMA family in a typical application environment. The kit contains two PMAfob remote control units using SmartLEWIS™ MCU transmitter and one SmartLEWIS™ RX TDA 5230 UWLink stick receiver board. Transmitter TDA 7110 TDA 7110F TDA 7116F Wireless control transmitter kit The PMAfob kit will give you an impression of the capabilities PMAfob_TDA7210V_434_Kit of the SmartLEWIS™ MCU PMA family in a typical application environment. The kit contains one PMAfob remote control units using SmartLEWIS™ MCU transmitter and one TDA 7210V (Mipot) receiver board. Transceiver TDA 5150 Evaluation board for the transmitter TDA 5150. Boards for SmartLEWIS™ TX 315/434/868/915MHz and output power of 5/10dBm available. The TDA 5150 system interface board (TDA 5150 SIB) is required for device evaluation together with the TDA 5150_X_X board. Wireless control transmitter board Transmitter USB stick for the transmitter TDA 5150 for TDA 5150 SmartLEWIS™ TX 315/434/868/915MHz and output power of 5/10dBm. Wireless control transmitter USB-UWLink 44 TDA5150-USB-UWLink Transmitter TDK 5100 Wireless control transmitter kit TDA5150_315_5 board TDA5150_434_10 board TDA5150_434_5 board TDA5150_868_10 board TDA5150_915_10 board TDA5150 board TDA5150 SIB board Transmitter Evaluation kit for the transmitter TDK 5100 and receiver TDA 5210/ TDA 5220 for 434/868MHz and output power of 5dBm. TDK5100-TDA5220_434_5 TDK5100-TDA5210_868_5 Wireless Control Board Name Wireless control transmitter kit/board Products Description Order No. TDK 5100F Evaluation kit for the transmitter TDK 5100F and receiver TDA 5220 for 434MHz. Evaluation board for the transmitter TDK 5100F for 434MHz and output power of 5dBm. TDK5100F-TDA5220_434_5 TDK5100F_434_5 board Evaluation kit for the transmitter TDK 5101 and receiver TDA 5211/ TDA 5221 for 315MHz and output power of 5dBm. TDK5101-TDA5211_315_5 TDK5101-TDA5221_315_5 Evaluation kit for the transmitter TDK 5101F and receiver TDA 5221 for 315MHz and output power of 5dBm. TDK5101F-TDA5221_315_5 Evaluation kit for the transmitter TDK 5110 and receiver TDA 5220 for 434/868MHz and output power of 10dBm. TDK5110-TDA5220_434_10 TDK5110-TDA5220_868_10 Evaluation kit for the transmitter TDK 5110F and receiver TDA 5210 for 434MHz. Evaluation board for the transmitter TDK 5110F for 434MHz. TDK5110F-TDA5210_434_10 TDK5110F_434_10 board Evaluation kit for the transmitter TDK 5111 and receiver TDA 5221 for 315MHz and output power of 10dBm. TDK5111-TDA5221_315_10 Evaluation kit for the transmitter TDK 5111F and receiver TDA 5211 for 315MHz and output power 10dBm. TDK 5111F-TDA5211_315_10 Evaluation kit for the transmitter TDK 5116F and receiver TDA 5220 for 868MHz and output power of 10dBm. TDK5116F-TDA5220_868_10 Evaluation kit for the transmitter TDA 7100 and receiver TDA 7200 for 434MHz and output power of 5dBm. TDA7100-TDA7200_434_5 Evaluation kit for the transmitter TDA 5102 and receiver TDA 5212 for 915MHz and output power of 5dBm. TDA5102-TDA5212_915_5 Evaluation kit for the receiver TDA 5210 and transmitter TDK 5100/TDK 5110F for 434/868MHz. TDK5100-TDA5210_868_5 TDK5110F- TDA5210_434_10 Evaluation kit for the receiver TDA 5211 and transmitter TDK 5101/TDK 5111F for 315MHz. TDK5101-TDA5211_315_5 TDK 5111F-TDA5211_315_10 Transmitter TDK 5101 Wireless control transmitter kit Transmitter TDK 5101F Wireless control transmitter kit Transmitter TDK 5110 Wireless control transmitter kit Transmitter TDK 5110F Wireless control kit/board Transmitter TDK 5111 Wireless control transmitter kit Transmitter TDK 5111F Wireless control transmitter kit Transmitter TDK 5116F Wireless control transmitter kit Transmitter TDA 7100 Wireless control transmitter kit Transmitter TDA 5102 Wireless control transmitter kit Transmitter TDA 5210 Wireless control kit Receiver TDA 5211 Wireless control kit Receiver Automotive Motor Control Consumer Communication Industrial Control & Automation Power Management Lighting & LED Driver 45 Wireless Control Board Name Wireless control receiver kit Products Description Order No. TDA 5212 Evaluation kit for the receiver TDA 5212 and transmitter TDA 5102 for 915MHz. TDA5102-TDA5212_915_5 Evaluation kit for the receiver TDA 5220 and transmitter TDK 5100/TDK 5100F/TDK 5110/TDK 5116F for 434/868MHz. TDK5100-TDA5220_434_5 TDK5100F-TDA5220_434_5 TDK5110-TDA5220_434_10 TDK5110-TDA5220_868_10 TDK5116F-TDA5220_868_10 Evaluation kit for the receiver TDA 5221 and transmitter TDK 5101/TDK 5101F/TDK 5111 for 315MHz. TDK5101-TDA5221_315_5 TDK5101F-TDA5221_315_5 TDK5111-TDA5221_315_10 USB stick incl. RF daughterboard for the receiver TDA 5230 for 434MHz. TDA5230-434-USB-UWLink Evaluation board for the receiver TDA 5230 and TDA 5231 for 315, 434 and 868MHz. TDA5230_434_5_board TDA5230_868_5_board TDA5231_315_5_board Evaluation kit for the receiver TDA 7200 and transmitter TDA 7100 for 434MHz. TDA7100-TDA7200_434_5 Evaluation kit for the receiver TDA 7210 and transmitter TDA 7110 for 868MHz. TDA7110-TDA7210_868_10 Evalution kit for the receiver TDA 7210V for 434MHz/868MHz frequency bands in a tiny VQFN package. The kit contains a TDA 7110F or TDA 7116F transmitter for test purposes. TDA7110F-TDA7210V_434_10 TDA7116F-TDA7210V_868_10 PMAfob_TDA7210V_434_Kit Evaluation kit for the transceiver TDA 525x for 315, 434, 868 and 915MHz. TDA5250-TDA5250_868 Kit TDA5251-TDA5251_315 Kit TDA5252-TDA5252_915 Kit TDA5255-TDA5255_434 Kit Evaluation kit for TDA 52XX receiver for 314, 434, 868 and 915MHz. For complete kit a SmartLEWIS™_SiB Board is required. TDA XXXX_315_5_Board TDA XXXX_434_5_Board TDA XXXX_868_5_Board TDA XXXX_915_5_Board Receiver TDA 5220 Wireless control receiver kit Receiver TDA 5221 Wireless control receiver kit Receiver TDA 5230 SmartLEWIS™ Wireless control receiver USB-UWLink RX receiver TDA 5230 TDA 5231 SmartLEWIS™ Wireless control receiver board RX receiver TDA 7200 Wireless control receiver kit Receiver TDA 7210 Wireless control receiver kit Receiver TDA 7210V Wireless control receiver kit Receiver TDA 5250 TDA 5251 TDA 5252 TDA 5255 Wireless control transceiver kit Transceiver TDA 5225 TDA 5235 TDA 5240 SmartLEWIS™ XXXX = 5225, 5235, 5240 SmartLEWIS_SiB Board Wireless control receiver kit Receiver TDA 7255V Wireless control transceiver kit 46 Transceiver Automotive Motor Control Consumer Communication Evaluation kit for TDA 7255V transceiver in a tiny VQFN package. The kit contains a pair of TDA 7255V-UWLink combos (extension board plus mainboard) to establish a bidirectional wireless link. Industrial Control & Automation Power Management TDA7255V-TDA7255V_434_10 Lighting & LED Driver Ask Infineon – Infineon Hotline-Service at your fingertips. Where you need it. When you need it. Infineon offers its toll-free 0800 service hotline as one central number, available 24 / 7 in English and German. Our global connection service goes way beyond standard operating and switchboard services by offering qualified support on the phone. Call us! Germany .......................... 0800 951 951 951 USA ................................. 1866 951 9519 International . .................. 00 800 951 951 951 Direct access ................... +49 89 234 - 0 (interconnection fee) Where to Buy Infineon Distribution Partners and Sales Offices Please use our location finder to get in contact with your nearest Infineon distributor or sales office. www.infineon.com/WhereToBuy Infineon Technologies – innovative semiconductor solutions for energy efficiency, mobility and security. Published by Infineon Technologies AG 85579 Neubiberg, Germany © 2011 Infineon Technologies AG. All Rights Reserved. Visit us: www.infineon.com Order Number: B192-H9214-G4-X-7600 Date: 05 / 2011 Attention please! The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/ or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.