PMEG3002TV 0.2 A very low VF MEGA Schottky barrier dual rectifier in SOT666 package Rev. 02 — 15 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier dual rectifier with an integrated guard ring for stress protection, encapsulated in a SOT666 ultra small and flat lead Surface Mounted Device (SMD) plastic package. Table 1. Product overview Type number Package Configuration NXP JEITA PMEG3002TV SOT666 - dual isolated 1.2 Features Forward current: ≤ 0.2 A Reverse voltage: ≤ 30 V Very low forward voltage Ultra small and flat lead SMD plastic package 1.3 Applications Low voltage rectification High efficiency DC-to-DC conversion Switch mode power supply Inverse polarity protection Low power consumption applications 1.4 Quick reference data Table 2. Symbol Quick reference data Parameter Conditions IF forward current Tamb ≤ 25 °C [1] VR reverse voltage VF forward voltage IF = 200 mA [2] Min Typ Max Unit - - 0.2 A - - 30 V - 420 480 mV Per diode [1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. [2] Pulse test: tp ≤ 300 μs; δ ≤ 0.02. PMEG3002TV NXP Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 2. Pinning information Table 3. Pinning Pin Description 1 anode (diode 1) 2 not connected 3 cathode (diode 2) 4 anode (diode 2) 5 not connected 6 Simplified outline cathode (diode 1) 6 5 4 1 2 3 Symbol 6 5 4 1 2 3 006aaa440 3. Ordering information Table 4. Ordering information Type number PMEG3002TV Package Name Description Version - plastic surface mounted package; 6 leads SOT666 4. Marking Table 5. Marking codes Type number Marking code PMEG3002TV 2M PMEG3002TV_2 Product data sheet © NXP B.V. 2010. All rights reserved. Rev. 02 — 15 January 2010 2 of 10 PMEG3002TV NXP Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 5. Limiting values Table 6. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit - 30 V - 0.2 A Per diode VR reverse voltage IF forward current IFRM repetitive peak forward current tp ≤ 1 ms; δ ≤ 0.25 Tamb ≤ 25 °C [1] - 1 A - 2.5 A IFSM non-repetitive peak forward current square wave; tp = 8 ms [1] Ptot total power dissipation Tamb ≤ 25 °C [1] - 200 mW [2] - 300 mW [1] - 300 mW [2] - 400 mW Per device total power dissipation Ptot Tamb ≤ 25 °C Tj junction temperature - 150 °C Tamb ambient temperature −65 +150 °C Tstg storage temperature −65 +150 °C [1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2. 6. Thermal characteristics Table 7. Thermal characteristics Symbol Parameter Conditions thermal resistance from junction to ambient in free air Min Typ Max Unit [1][2] - - 416 K/W [1][3] - - 318 K/W [4] - - 195 K/W Per device Rth(j-a) Rth(j-sp) thermal resistance from junction to solder point [1] For Schottky barrier diodes thermal runaway has to be considered, as in some applications the reverse power losses PR are a significant part of the total power losses. Nomograms for determining the reverse power losses PR and IF(AV) rating are available on request. [2] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [3] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2. [4] Soldering point of cathode tab. PMEG3002TV_2 Product data sheet © NXP B.V. 2010. All rights reserved. Rev. 02 — 15 January 2010 3 of 10 PMEG3002TV NXP Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 7. Characteristics Table 8. Characteristics Tamb = 25 °C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit IF = 0.1 mA - 130 190 mV IF = 1 mA - 190 250 mV IF = 10 mA - 255 300 mV IF = 100 mA - 355 400 mV IF = 200 mA - 420 480 mV VR = 10 V - 3 10 μA VR = 30 V - 10 30 μA VR = 10 V; Tamb = 100 °C - 400 - μA VR = 1 V; f = 1 MHz - 20 25 pF Per diode VF IR Cd [1] [1] forward voltage reverse current diode capacitance Pulse test: tp ≤ 300 μs; δ ≤ 0.02. PMEG3002TV_2 Product data sheet © NXP B.V. 2010. All rights reserved. Rev. 02 — 15 January 2010 4 of 10 PMEG3002TV NXP Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 006aaa660 103 IR (μA) IF (mA) 102 006aaa661 104 (1) 103 (2) 102 (3) (1) 10 (2) 10 (4) 1 10−1 (3) (4) (5) 10−2 1 (5) 10−3 10−1 10−4 0 0.2 0.4 0.6 0 5 10 VF (V) (1) Tamb = 125 °C (1) Tamb = 125 °C (2) Tamb = 100 °C (2) Tamb = 100 °C (3) Tamb = 85 °C (3) Tamb = 85 °C (4) Tamb = 25 °C (4) Tamb = 25 °C (5) Tamb = −40 °C (5) Tamb = −40 °C Fig 1. Forward current as a function of forward voltage; typical values Fig 2. 15 20 25 30 VR (V) Reverse current as a function of reverse voltage; typical values 001aaa353 40 Cd (pF) 30 20 10 0 0 10 20 30 VR (V) Tamb = 25 °C; f = 1 MHz Fig 3. Diode capacitance as a function of reverse voltage; typical values PMEG3002TV_2 Product data sheet © NXP B.V. 2010. All rights reserved. Rev. 02 — 15 January 2010 5 of 10 PMEG3002TV NXP Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 8. Package outline 1.7 1.5 6 0.6 0.5 5 4 0.3 0.1 1.7 1.5 1.3 1.1 pin 1 index 1 2 3 0.18 0.08 0.27 0.17 0.5 1 Dimensions in mm Fig 4. 04-11-08 Package outline SOT666 9. Packing information Table 9. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number Package PMEG3002TV SOT666 [1] Description 4000 8000 2 mm pitch, 8 mm tape and reel - -315 4 mm pitch, 8 mm tape and reel -115 - For further information and the availability of packing methods, see Section 13. PMEG3002TV_2 Product data sheet Packing quantity © NXP B.V. 2010. All rights reserved. Rev. 02 — 15 January 2010 6 of 10 PMEG3002TV NXP Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 10. Soldering 2.75 2.45 2.10 1.60 0.15 (4x) solder lands 0.40 (6x) 0.075 solder resist 0.55 2.00 1.70 1.00 (2x) 0.30 (2x) placement area 0.375 (4x) occupied area 1.20 2.20 2.50 mgx367 Reflow soldering is the only recommended soldering method. Dimensions in mm Fig 5. Reflow soldering footprint SOT666 PMEG3002TV_2 Product data sheet © NXP B.V. 2010. All rights reserved. Rev. 02 — 15 January 2010 7 of 10 PMEG3002TV NXP Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 11. Revision history Table 10. Revision history Document ID Release date Data sheet status Change notice Supersedes PMEG3002TV_2 20100115 Product data sheet - PMEG3002TV_1 Modifications: PMEG3002TV_1 • This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal definitions and disclaimers. No changes were made to the technical content. 20051021 Product data sheet PMEG3002TV_2 Product data sheet - - © NXP B.V. 2010. All rights reserved. Rev. 02 — 15 January 2010 8 of 10 PMEG3002TV NXP Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 12. Legal information 12.1 Data sheet status Document status[1][2] Product status[3] Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. Definition [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 12.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 12.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. 12.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 13. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] PMEG3002TV_2 Product data sheet © NXP B.V. 2010. All rights reserved. Rev. 02 — 15 January 2010 9 of 10 PMEG3002TV NXP Semiconductors 0.2 A very low VF MEGA Schottky barrier dual rectifier 14. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 12.1 12.2 12.3 12.4 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Thermal characteristics . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6 Packing information . . . . . . . . . . . . . . . . . . . . . 6 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 8 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Contact information. . . . . . . . . . . . . . . . . . . . . . 9 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2010. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 15 January 2010 Document identifier: PMEG3002TV_2