2W SMD DC-DC Converter P2ES-Series ● ● ● ● ● Up to 1500 VDC isolation MTBF > 3.5 Mio. h at 25 °C -40...105 °C Operating temperature range Continuous short circuit protection Efficiency up to 86 % Model guide Type Input voltage range Output voltage [VDC] [VDC] no-load typ. [mA] full-load typ. [mA] min. [mA] max. [mA] Output voltage drift @ load 10~100% [%] 4.5..5.5 4.5..5.5 4.5..5.5 4.5..5.5 4.5..5.5 10.8..13.2 10.8..13.2 10.8..13.2 10.8..13.2 10.8..13.2 13.5..16.5 21.6..26.4 21.6..26.4 21.6..26.4 21.6..26.4 3.3 5.0 9.0 12.0 15.0 5.0 9.0 12.0 15.0 24.0 15.0 5.0 12.0 15.0 24.0 30 30 30 30 30 25 25 25 25 25 18 15 15 15 15 500 500 500 500 500 210 210 210 210 210 170 105 105 105 105 40 40 22 17 13 40 22 17 13 8 13 40 17 13 8 400 400 222 167 133 400 222 167 133 83 133 400 167 133 83 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 P2ES053R3S P2ES0505S P2ES0509S P2ES0512S P2ES0515S P2ES1205S P2ES1209S P2ES1212S P2ES1215S P2ES1224S P2ES1515S P2ES2405S P2ES2412S P2ES2415S P2ES2424S Part designation structure PHI-CON & Series output power designation P2 2W E Input current Mounting technology S SMD Output current Input voltage Output voltage 05 12 15 24 3R3 05 09 12 15 24 5V 12 V 15 V 24 V 3.3V 5V 9V 12 V 15 V 24 V Reflected input ripple current (see Fig.1) typ. [mA] 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 Output configuration S Single Efficiency typ. Capacitive load max. [%] [µF] 72 79 82 82 83 79 82 82 83 84 83 79 82 83 86 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 Packing blank TR Tube Reel Specifications Input Voltage range Filter Input / output: Isolation voltage tested for 60 sec. @ leakage current < 1mA Isolation Resistance @ 500 VDC Capacitance Output Output voltage drift @ input voltage change Output voltage tolerance at 70 % load Output voltage drift @ 10 % to 100 % load change Temperature coefficient Short circuit protection Ripple & noise (BW 20 MHz) General Switching frequency Environmental EMI conducted emission, with external filter circuit Fig. 2 EMI radiated emission, with external filter circuit Fig. 2 EMS, ESD ± 10 % Capacitor 1.5 kVDC 109 Ω, min. 20 pF, typ. @ Operating temperature (ambient) Storage temperature Case temperature rise at full load Derating Storage humidity Only P2ESxx3R3S ± 1.5 % @ 1% Vin change All others ± 1.2 % @ 1% Vin change ± 5 % max. See diagram below See diagram below 0.03 % / °C, max., at full load Continuous, automatic recovery P1ES24xxS only <1 sec. 30 mV @ Vout 5, 9, 12 V Types 60 mV @ Vout 12 & 24 V Types ~ 100 kHz… 300 kHz Cooling Physical Package material Weight Reliability, MTBF (MIL-HDBK-217 @ 25 °C) Absolute maximum ratings P2ES05xxS P2ES12xxS P2ES15xxS P2ES24xxS Manual soldering lead temperature Soldering temperature Moisture sensitivity level (MSL) CISPR22 / EN55022 CLASS B CISPR22 / EN55022 CLASS B IEC-, EN61000-4-2, contact ± 6 kV perf. criteria B -40 °C to +105 °C with derating -55 °C to +125 °C 25 °C, typ. See derating curve Up to 95 %, non-condensing Free air convection Epoxy resin (UL94-V0) 1.52 g 3.5 Mio. hours -0.7 ~ 9 VDC, max. 1 s -0.7 ~ 18 VDC, max. 1 s -0.7 ~ 21 VDC, max. 1 s -0.7 ~ 30 VDC, max. 1 s 300 °C max. 10 s max., 1.5 mm distance from body 217 °C for 60 s max., 245 °C peak IPC/JEDEC J-STD-020D.1 Page 1 of 6 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstrasse 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected] 2W SMD DC-DC Converter P2ES-Series Fig. 1 Input reflected ripple current measure circuit oscilloscope current probe + Vin 4.7µH Measure point 220 µF ESR <1 Ω at 100 kHz Load - Vin Fig. 2 EMI recommended external circuit + Vin L CX Load - Vin External components to meet IEC/EN55022, CLASS A to Fig. 2 Model series CX CY L P2ES05xxS 4.7 µF, 50 V not assembled 6.8 µH P2ES12xxS 2.2 µF, 50 V not assembled 6.8 µH P2ES15xxS 2.2 µF, 50 V 470 pF, 2 kV 6.8 µH P2ES24xxS 1 µF, 50 V 470 pF, 2 kV 6.8 µH CY Fig. 3 Typical application for ripple & noise reduction + Vin + Vout Cin - Vin Cout - Vin Table A External capacitor table for Figure 3 Vin version Cin Vout version P2ES05xxS 4.7 µF P2ESxx05S P2ES12xxS 2.2 µF P2ESxx05S P2ES15xxS 2.2 µF P2ESxx09S P2ES24xxS 1 µF P2ESxx12S P2ESxx15S P2ESxx24S Cout 10 µF 10 µF 4.7 µF 2.2 µF 1 µF 0.47 µF Recommended circuit If you want to further decrease the input/output ripple, a capacitor filtering network may be connected to the input and output ends of the DC/DC converter, see (Figure 3). It should also be noted that the capacitance of filter capacitor must be proper. If the capacitance is too big, a start up problem might arise. To ensure safe and reliable operation, the capacitance of the output filter for each output channel may not exceed certain values (see table page 1). It’s not recommended to connect any external capacitors in the application field with less than 0.5 watt output. Page 2 of 6 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstrasse 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected] 2W SMD DC-DC Converter P2ES-Series Note: 1. Operation under minimum load will not damage the converter. However, they may not meet all specifications. 2. Maximum capacitive load is tested at nominal input voltage and full load. 3. Unless otherwise noted, all specifications are measured at Ta 25 °C, humidity <75 %, nominal input voltage and rated output load. 4. Specifications of this product are subject to changes without prior notice. 5. P2ES series is not usable for IGBT driver applications. Page 3 of 6 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstrasse 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected] 2W SMD DC-DC Converter P2ES-Series Dimensions Footprint Notes: All dimensions are in mm General tolerances ±0.25 mm Pin tolerances ±0.1 mm Lead 1 2 3 4 5 6 7 8 Lead connection - Vinput + Vinput No lead - Voutput + Voutput No lead No lead Not connected Page 4 of 6 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstrasse 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected] 2W SMD DC-DC Converter P2ES-Series Page 5 of 6 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstrasse 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected] 2W SMD DC-DC Converter P2ES-Series PHI-CON is a trademark of HY-LINE Holding GmbH. Only for professional use by professionals! Not for resale or distribution to the general public in any way! Read the instructions carefully before using! Life Support Policy: HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 11.14 f Page 6 of 6 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstrasse 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected]