MBR350 D

MBR350, MBR360
MBR360 is a Preferred Device
Axial Lead Rectifiers
These devices employ the Schottky Barrier principle in a large area
metal−to−silicon power diode. State−of−the−art geometry features
epitaxial construction with oxide passivation and metal overlap
contact. Ideally suited for use as rectifiers in low−voltage,
high−frequency inverters, free wheeling diodes, and polarity
protection diodes.
http://onsemi.com
Features
•
•
•
•
•
SCHOTTKY BARRIER
RECTIFIERS
3.0 AMPERES
50, 60 VOLTS
Extremely Low vF
Low Power Loss/High Efficiency
Highly Stable Oxide Passivated Junction
Low Stored Charge, Majority Carrier Conduction
Pb−Free Packages are Available*
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 1.1 Gram (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
•
•
Leads are Readily Solderable
Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
Polarity: Cathode indicated by Polarity Band
AXIAL LEAD
CASE 267−05
(DO−201AD)
STYLE 1
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Symbol
MBR350
MBR360
VRRM
VRWM
VR
Max
Unit
V
Average Rectified Forward Current TA = 65°C
(RqJA = 28°C/W, P.C. Board Mounting)
IO
3.0
A
Non−Repetitive Peak Surge Current (Note 1)
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz, TL = 75°C)
IFSM
80
A
Operating and Storage Junction Temperature
Range (Reverse Voltage Applied)
TJ, Tstg
−65 to
+150
°C
28
°C/W
THERMAL CHARACTERISTICS
Thermal Resistance, Junction−to−Ambient
(see Note 4 − Mounting Data, Mounting Method 3)
RqJA
MARKING DIAGRAM
50
60
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Lead Temperature reference is cathode lead 1/32 in from case.
A
MBR
3x0G
G
A
x
G
(Note:
= Assembly Location
= 5 or 6
= Pb−Free Package
Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
June, 2006 − Rev. 6
1
Publication Order Number:
MBR350/D
MBR350, MBR360
ELECTRICAL CHARACTERISTICS (TL = 25°C unless otherwise noted) (Note 2)
Characteristic
Symbol
Maximum Instantaneous Forward Voltage (Note 3)
(iF = 1.0 Amp)
(iF = 3.0 Amp)
(iF = 9.4 Amp)
vF
Maximum Instantaneous Reverse Current @ Rated DC Voltage (Note 3)
TL = 25°C
TL = 100°C
iR
Max
Unit
V
0.600
0.740
1.080
mA
0.60
20
2. Lead Temperature reference is cathode lead 1/32 in from case.
3. Pulse Test: Pulse Width = 300 ms, Duty Cycle = 2.0%.
20
75°C
20
10
25°C
I , REVERSE CURRENT (mA)
R
TJ = 100°C
10
7.0
3.0
2.0
100°C
75°C
0.20
0.10
0.05
*The curves shown are typical for the highest
voltage device in the voltage grouping. Typical
reverse current for lower voltage selections can
be estimated from these same curves if VR is
sufficiently below rated VR.
0.02
0.01
0.005
25°C
0.002
1.0
0
10
0.7
20
30
40
50
VR REVERSE VOLTAGE (VOLTS)
60
80
Figure 2. Typical Reverse Current*
, AVERAGE FORWARD CURRENT (AMPS)
0.5
0.3
0.2
0.1
0.07
0.05
5.0
RATED VR
RqJA = 28°C/W
4.0
DC
3.0
SQUARE
WAVE
2.0
1.0
TJ = 150°C
F (AV)
0.03
0.02
I
i , INSTANTANEOUS FORWARD CURRENT (AMPS)
F
5.0
TJ = 150°C
5.0
2.0
1.0
0.50
0
0.2
0.6
0.8
0.4
1.0
vF, INSTANTANEOUS VOLTAGE (VOLTS)
1.2
1.4
0
0
20
40
60
80
100
120
TA, AMBIENT TEMPERATURE (C°)
140
Figure 3. Current Derating Ambient
(Mounting Method 3 per Note 4)
Figure 1. Typical Forward Voltage
http://onsemi.com
2
160
5.0
300
4.0
200
TJ = 150°C
3.0
C, CAPACITANCE (pF)
P
, AVERAGE POWER DISSIPATION (WATTS)
F (AV)
MBR350, MBR360
SQUARE
WAVE
2.0
dc
TJ = 25°C
100
70
50
1.0
40
0
30
0
1.0
2.0
3.0
4.0
IF (AV), AVERAGE FORWARD CURRENT (AMPS)
5.0
0
10
Figure 4. Power Dissipation
20
30
40
VR, REVERSE VOLTAGE (VOLTS)
50
Figure 5. Typical Capacitance
NOTE 4 — MOUNTING DATA
Data shown for thermal resistance, junction−to−ambient (RqJA) for the mountings shown is to be used as
typical guideline values for preliminary engineering, or in case the tie point temperature cannot be measured.
TYPICAL VALUES FOR RqJA IN STILL AIR
Lead Length, L (in)
Mounting
Method
1/8
1/4
1/2
3/4
RqJA
1
50
51
53
55
°C/W
2
58
59
61
63
°C/W
3
Mounting Method 1
°C/W
28
Mounting Method 2
Mounting Method 3
ÉÉ
ÉÉÉÉÉÉÉÉÉÉÉ ÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉ
ÉÉÉÉÉÉÉÉÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
P.C. Board where available
copper surface is small.
L
L
Vector Push−In Terminals T−28
L
P.C. Board with 2−1/2 in X 2−1/2 in
copper surface.
L
L = 1/2’’
Board Ground Plane
ORDERING INFORMATION
Package
Shipping †
MBR350RL
Axial Lead
1500 Units / Tape & Reel
MBR350RLG
Axial Lead
(Pb−Free)
1500 Units / Tape & Reel
MBR360
Axial Lead
500 Units / Bag
MBR360G
Axial Lead
(Pb−Free)
500 Units / Bag
MBR360RL
Axial Lead
1500 Units / Tape & Reel
MBR360RLG
Axial Lead
(Pb−Free)
1500 Units / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
3
MBR350, MBR360
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 267−05
(DO−201AD)
ISSUE G
K
D
A
1
2
B
K
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
DIM
A
B
D
K
INCHES
MIN
MAX
0.287
0.374
0.189
0.209
0.047
0.051
1.000
−−−
MILLIMETERS
MIN
MAX
7.30
9.50
4.80
5.30
1.20
1.30
25.40
−−−
STYLE 1:
PIN 1. CATHODE (POLARITY BAND)
2. ANODE
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
4
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MBR350/D