ONSEMI MBRD350G

MBRD320G,
MBRD330G,
MBRD340G,
MBRD350G,
MBRD360G,
SBRD8320G,
SBRD8330G,
SBRD8340G,
SBRD8350G,
SBRD8360G
MBRD320, MBRD340 and MBRD360 are Preferred Devices
http://onsemi.com
SWITCHMODE
Power Rectifiers
SCHOTTKY BARRIER
RECTIFIERS
3.0 AMPERES, 20 − 60 VOLTS
DPAK Surface Mount Package
These state−of−the−art devices are designed for use as output
rectifiers, free wheeling, protection and steering diodes in switching
power supplies, inverters and other inductive switching circuits.
Features






Extremely Fast Switching
Extremely Low Forward Drop
Platinum Barrier with Avalanche Guardrings
AEC−Q101 Qualified and PPAP Capable
SBRD8 Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements
All Packages are Pb−Free*
DPAK
CASE 369C
1
4
3
MARKING DIAGRAM
Mechanical Characteristics:
YWW
B
3x0G
 Case: Epoxy, Molded
 Weight: 0.4 Gram (Approximately)
 Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
 Lead and Mounting Surface Temperature for Soldering Purposes;

260C Max. for 10 Seconds
ESD Ratings:
 Machine Model = C
 Human Body Model = 3B
Y
WW
B3x0
x
G
= Year
= Work Week
= Device Code
= 2, 3, 4, 5, or 6
= Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
 Semiconductor Components Industries, LLC, 2012
January, 2012 − Rev. 8
1
Publication Order Number:
MBRD320/D
MBRD320G, SBRD8320G, MBRD330G, SBRD8330G, MBRD340G, SBRD8340G,
MBRD350G, SBRD8350G, MBRD360G, SBRD8360G
MAXIMUM RATINGS
Rating
Symbol
MBRD/SBRD8
320
330
340
350
360
20
30
40
50
60
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
V
Average Rectified Forward Current (TC = +125C, Rated VR)
IF(AV)
3
A
Peak Repetitive Forward Current, TC = +125C
(Rated VR, Square Wave, 20 kHz)
IFRM
6
A
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
IFSM
75
A
Peak Repetitive Reverse Surge Current (2 ms, 1 kHz)
IRRM
1
A
Operating Junction Temperature Range (Note 1)
TJ
−65 to +175
C
Storage Temperature Range
Tstg
−65 to +175
C
Voltage Rate of Change (Rated VR)
dv/dt
10,000
V/ms
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA.
THERMAL CHARACTERISTICS
Symbol
Value
Unit
Maximum Thermal Resistance, Junction−to−Case
Characteristic
RqJC
6
C/W
Maximum Thermal Resistance, Junction−to−Ambient (Note 2)
RqJA
80
C/W
Symbol
Value
Unit
2. Rating applies when surface mounted on the minimum pad size recommended.
ELECTRICAL CHARACTERISTICS
Characteristic
Maximum Instantaneous Forward Voltage (Note 3)
iF = 3 Amps, TC = +25C
iF = 3 Amps, TC = +125C
iF = 6 Amps, TC = +25C
iF = 6 Amps, TC = +125C
VF
Maximum Instantaneous Reverse Current (Note 3)
(Rated dc Voltage, TC = +25C)
(Rated dc Voltage, TC = +125C)
iR
0.6
0.45
0.7
0.625
0.2
20
3. Pulse Test: Pulse Width = 300 ms, Duty Cycle  2.0%.
ORDERING INFORMATION
Package
Shipping†
MBRD320G
DPAK
(Pb−Free)
75 Units / Rail
SBRD8320G
DPAK
(Pb−Free)
75 Units / Rail
MBRD320RLG
DPAK
(Pb−Free)
1,800 Tape & Reel
MBRD320T4G
DPAK
(Pb−Free)
2,500 Tape & Reel
SBRD8320T4G
DPAK
(Pb−Free)
2,500 Tape & Reel
MBRD330G
DPAK
(Pb−Free)
75 Units / Rail
SBRD8330G
DPAK
(Pb−Free)
75 Units / Rail
Device
http://onsemi.com
2
V
mA
MBRD320G, SBRD8320G, MBRD330G, SBRD8330G, MBRD340G, SBRD8340G,
MBRD350G, SBRD8350G, MBRD360G, SBRD8360G
ORDERING INFORMATION
Package
Shipping†
MBRD330RLG
DPAK
(Pb−Free)
1,800 Tape & Reel
MBRD330T4G
DPAK
(Pb−Free)
2,500 Tape & Reel
SBRD8330T4G
DPAK
(Pb−Free)
2,500 Tape & Reel
MBRD340G
DPAK
(Pb−Free)
75 Units / Rail
SBRD8340G
DPAK
(Pb−Free)
75 Units / Rail
MBRD340RLG
DPAK
(Pb−Free)
1,800 Tape & Reel
MBRD340T4G
DPAK
(Pb−Free)
2,500 Tape & Reel
SBRD8340T4G
DPAK
(Pb−Free)
2,500 Tape & Reel
MBRD350G
DPAK
(Pb−Free)
75 Units / Rail
SBRD8350G
DPAK
(Pb−Free)
75 Units / Rail
MBRD350RLG
DPAK
(Pb−Free)
1,800 Tape & Reel
SBRD8350RLG
DPAK
(Pb−Free)
1,800 Tape & Reel
MBRD350T4G
DPAK
(Pb−Free)
2,500 Tape & Reel
SBRD8350T4G
DPAK
(Pb−Free)
2,500 Tape & Reel
MBRD360G
DPAK
(Pb−Free)
75 Units / Rail
SBRD8360G
DPAK
(Pb−Free)
75 Units / Rail
MBRD360RLG
DPAK
(Pb−Free)
1,800 Tape & Reel
SBRD8360RLG
DPAK
(Pb−Free)
1,800 Tape & Reel
MBRD360T4G
DPAK
(Pb−Free)
2,500 Tape & Reel
SBRD8360T4G
DPAK
(Pb−Free)
2,500 Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
3
MBRD320G, SBRD8320G, MBRD330G, SBRD8330G, MBRD340G, SBRD8340G,
MBRD350G, SBRD8350G, MBRD360G, SBRD8360G
TYPICAL CHARACTERISTICS
100
I R , REVERSE CURRENT (mA)
10
40
20
10
TJ = 150C
125C
4.0
2.0
1.0
100C
75C
0.4
0.2
0.1
0.04
0.02
0.01
0.004
0.002
0.001
25C
0
TJ = 25C
75C
1.0
0.2
0.3
0.4
0.5
0.6
0.7
70
60
Figure 2. Typical Reverse Current
125C
0.1
0.1
40
20
30
50
VR, REVERSE VOLTAGE (VOLTS)
10
*The curves shown are typical for the highest voltage device in the
voltage grouping. Typical reverse current for lower voltage selections
can be estimated from these curves if VR is sufficient below rated VR.
150C
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
i F, INSTANTANEOUS FORWARD CURRENT (AMPS)
100
0.8
0.9
1.0
1.1
10
SINE
WAVE
9.0
TJ = 150C
8.0
5
7.0
10
6.0
5.0
dc
IPK/IAV = 20
SQUARE
WAVE
4.0
3.0
2.0
1.0
0
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
vF, INSTANTANEOUS VOLTAGE (VOLTS)
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 1. Typical Forward Voltage
Figure 3. Average Power Dissipation
http://onsemi.com
4
9.0
10
MBRD320G, SBRD8320G, MBRD330G, SBRD8330G, MBRD340G, SBRD8340G,
MBRD350G, SBRD8350G, MBRD360G, SBRD8360G
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
TYPICAL CHARACTERISTICS
8.0
RATED VOLTAGE APPLIED
7.0
RqJC = 6C/W
6.0
TJ = 150C
SINE
WAVE
OR
SQUARE
WAVE
5.0
4.0
3.0
dc
2.0
1.0
0
80
90
100
110
120
140
130
150
160
TC, CASE TEMPERATURE (C)
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
Figure 4. Current Derating, Case
4.0
RqJA = 80C/W
SURFACE MOUNTED ON MIN.
PAD SIZE RECOMMENDED
TJ = 150C
3.5
3.0
dc
SQUARE WAVE
OR
SINE WAVE
VR = 25 V
2.5
TJ = 125C
2.0
1.5
TJ = 150C
1.0
0.5
0
0
20
40
60
100
80
120
140
160
TA, AMBIENT TEMPERATURE (C)
Figure 5. Current Derating, Ambient
C, CAPACITANCE (pF)
1K
700
500
300
200
TJ = 25C
100
70
50
30
20
10
0
10
20
30
40
50
VR, REVERSE VOLTAGE (VOLTS)
Figure 6. Typical Capacitance
http://onsemi.com
5
60
70
MBRD320G, SBRD8320G, MBRD330G, SBRD8330G, MBRD340G, SBRD8340G,
MBRD350G, SBRD8350G, MBRD360G, SBRD8360G
PACKAGE DIMENSIONS
DPAK (SINGLE GAUGE)
CASE 369C−01
ISSUE D
A
E
b3
c2
B
Z
D
1
L4
A
4
L3
b2
e
2
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL
NOT EXCEED 0.006 INCHES PER SIDE.
5. DIMENSIONS D AND E ARE DETERMINED AT THE
OUTERMOST EXTREMES OF THE PLASTIC BODY.
6. DATUMS A AND B ARE DETERMINED AT DATUM
PLANE H.
C
H
DETAIL A
3
c
b
0.005 (0.13)
M
H
C
L2
GAUGE
PLANE
C
L
SEATING
PLANE
A1
L1
DETAIL A
ROTATED 905 CW
DIM
A
A1
b
b2
b3
c
c2
D
E
e
H
L
L1
L2
L3
L4
Z
INCHES
MIN
MAX
0.086 0.094
0.000 0.005
0.025 0.035
0.030 0.045
0.180 0.215
0.018 0.024
0.018 0.024
0.235 0.245
0.250 0.265
0.090 BSC
0.370 0.410
0.055 0.070
0.108 REF
0.020 BSC
0.035 0.050
−−− 0.040
0.155
−−−
MILLIMETERS
MIN
MAX
2.18
2.38
0.00
0.13
0.63
0.89
0.76
1.14
4.57
5.46
0.46
0.61
0.46
0.61
5.97
6.22
6.35
6.73
2.29 BSC
9.40 10.41
1.40
1.78
2.74 REF
0.51 BSC
0.89
1.27
−−−
1.01
3.93
−−−
SOLDERING FOOTPRINT*
6.20
0.244
2.58
0.102
5.80
0.228
3.00
0.118
1.60
0.063
6.17
0.243
SCALE 3:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MBRD320/D