MSRD620CTR D

MSRD620CTRG,
MSRD620CTT4RG,
SSRD8620CTRG,
SSRD8620CTT4RG
SWITCHMODE
Soft Ultrafast Recovery
Reverse Polarity Power
Rectifier
http://onsemi.com
State−of−the−art geometry features epitaxial construction with
glass passivation. Ideally suited for low voltage, high frequency
switching power supplies, free wheeling diode and polarity
protection diodes.
SOFT ULTRAFAST
REVERSE POLARITY RECTIFIER
6.0 AMPERES, 200 VOLTS
Features
 Soft Ultrafast Recovery
 Matched Dual Die Construction − May Be Paralleled for High





Current Output
Short Heat Sink Tab Manufactured − Not Sheared
Epoxy Meets UL 94 V−0 @ 0.125 in.
AEC−Q101 Qualified and PPAP Capable
SSRD8 Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements
All Packages are Pb-Free*
DPAK
CASE 369C
1
4
3
MARKING DIAGRAM
AYWW
S
620RG
Mechanical Characteristics
 Case: Epoxy, Molded
 Weight: 0.4 Grams (Approximately)
 Finish: All External Surfaces Corrosion Resistant and Terminal


Leads are Readily Solderable
Lead and Mounting Surface Temperature for Soldering Purposes:
260C Max. for 10 Seconds
ESD Ratings:
 Machine Model = C
 Human Body Model = 2
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
 Semiconductor Components Industries, LLC, 2012
January, 2012 − Rev. 3
1
A
Y
WW
G
= Assembly Location
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
Package
Shipping†
MSRD620CTRG
DPAK
(Pb−Free)
75 Units/Rail
SSRD8620CTRG
DPAK
(Pb−Free)
75 Units/Rail
MSRD620CTT4RG
DPAK
(Pb−Free)
2,500 /
Tape & Reel
SSRD8620CTT4RG
DPAK
(Pb−Free)
2,500 /
Tape & Reel
Device
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Publication Order Number:
MSRD620CTR/D
MSRD620CTRG, MSRD620CTT4RG, SSRD8620CTRG, SSRD8620CTT4RG
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Symbol
Value
Unit
VRRM
VRWM
VR
200
V
Average Rectified Forward Current
(At Rated VR, TC = 162C)
Per Leg
Per Package
IO
A
3.0
6.0
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions, Halfwave, Single Phase, 60 Hz)
Per Package
Storage/Operating Case Temperature
IFSM
A
45
Tstg, Tc
−65 to +175
C
TJ
−65 to +175
C
Operating Junction Temperature
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
THERMAL CHARACTERISTICS
Rating
Symbol
Thermal Resistance − Junction−to−Case (Note 1)
Per Leg
RqJC
Thermal Resistance − Junction−to−Ambient (Note 1)
Per Leg
RqJA
Thermal Resistance − Junction−to−Ambient (Note 2)
Per Leg
RqJA
Value
Unit
C/W
5.0
C/W
60
C/W
166
1. Mounted with 700 mm2 copper pad size (approximately 1 in2) 1 oz FR4 board.
2. Mounted with pad size approximately 46 mm2 copper, 1 oz FR4 board.
ELECTRICAL CHARACTERISTICS
Rating
Symbol
Maximum Instantaneous Forward Voltage (Note 3)
Per Leg
(IF = 3.0 A)
(IF = 6.0 A)
VF
Maximum Instantaneous Reverse Current (Note 3)
Per Leg
(VR = 200 V)
IR
Maximum Reverse Recovery Time (Note 4)
Per Leg
(VR = 30 V, IF = 1.0 A, di/dt = 50 A/ms)
trr
Value
TJ = 125C
1.15
1.30
0.95
1.15
TJ = 25C
TJ = 125C
1.0
200
http://onsemi.com
2
V
mA
ns
75
3. Pulse Test: Pulse Width  380 ms, Duty Cycle  2%.
4. trr measured projecting from 25% of IRM to ground.
Unit
TJ = 25C
MSRD620CTRG, MSRD620CTT4RG, SSRD8620CTRG, SSRD8620CTT4RG
IF, INSTANTANEOUS FORWARD CURRENT (AMPS)
IF, INSTANTANEOUS FORWARD CURRENT (AMPS
TYPICAL CHARACTERISTICS
100
10
TJ = 150C
125C
1.0
25C
-55C
0.1
0
0.5
1.0
1.5
2.0
2.5
3.0
125C
1.0
25C
-55C
0.1
0
1.0
0.5
1.5
2.0
2.5
3.0
Figure 1. Typical Forward Voltage, Per Leg
Figure 2. Maximum Forward Voltage, Per Leg
1E-03
IR , MAXIMUM REVERSE CURRENT (AMPS)
IR , REVERSE CURRENT (AMPS)
TJ = 150C
VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
TJ = 150C
1E-05
125C
1E-06
1E-07
25C
1E-08
1E-09
-55C
1E-10
0
20
40
60
80
100
120
140
160
TJ = 150C
1E-04
125C
1E-05
1E-06
25C
1E-07
-55C
1E-08
180 200
0
20
40
60
80
100
120
140
160
180 200
VR, REVERSE VOLTAGE (VOLTS)
VR, REVERSE VOLTAGE (VOLTS)
Figure 3. Typical Reverse Current, Per Leg
Figure 4. Maximum Reverse Current, Per Leg
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
100
TJ = 25C
C, CAPACITANCE (pF)
10
VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
1E-04
10
1.0
0
100
40
80
120
160
10
RATED VOLTAGE APPLIED
RqJC = 5C/W
9
8
7
6
dc
5
4
3
SQUARE WAVE
2
1
0
80
200
90
100
110
120
130
140
150
160
170
180
TC, CASE TEMPERATURE (C)
VR, REVERSE VOLTAGE (VOLTS)
Figure 6. Typical Current Derating, Case (Per Leg)
Figure 5. Typical Capacitance
http://onsemi.com
3
MSRD620CTRG, MSRD620CTT4RG, SSRD8620CTRG, SSRD8620CTT4RG
TYPICAL CHARACTERISTICS
1000
R(t) (C/W)
100
Duty Cycle = 50%
20%
10 10%
5%
2%
1 1%
0.1
Single Pulse
0.01
0.000001
0.00001
0.0001
0.001
0.01
0.1
PULSE TIME (sec)
1
10
100
1000
100
1000
Figure 7. Thermal Response, Junction−to−Ambient (46 mm2 pad)
100
R(t) (C/W)
10
1
Duty Cycle = 50%
20%
10%
5%
2%
1%
0.1
Single Pulse
0.01
0.000001
0.00001
0.0001
0.001
0.01
0.1
PULSE TIME (sec)
1
Figure 8. Thermal Response, Junction−to−Ambient (1 in2 pad)
http://onsemi.com
4
10
MSRD620CTRG, MSRD620CTT4RG, SSRD8620CTRG, SSRD8620CTT4RG
PACKAGE DIMENSIONS
DPAK (SINGLE GAUGE)
CASE 369C−01
ISSUE D
A
E
b3
c2
B
Z
D
1
L4
A
4
L3
b2
e
2
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL
NOT EXCEED 0.006 INCHES PER SIDE.
5. DIMENSIONS D AND E ARE DETERMINED AT THE
OUTERMOST EXTREMES OF THE PLASTIC BODY.
6. DATUMS A AND B ARE DETERMINED AT DATUM
PLANE H.
C
H
DETAIL A
3
c
b
0.005 (0.13)
M
H
C
L2
GAUGE
PLANE
C
L
SEATING
PLANE
A1
L1
DETAIL A
ROTATED 905 CW
DIM
A
A1
b
b2
b3
c
c2
D
E
e
H
L
L1
L2
L3
L4
Z
INCHES
MIN
MAX
0.086 0.094
0.000 0.005
0.025 0.035
0.030 0.045
0.180 0.215
0.018 0.024
0.018 0.024
0.235 0.245
0.250 0.265
0.090 BSC
0.370 0.410
0.055 0.070
0.108 REF
0.020 BSC
0.035 0.050
−−− 0.040
0.155
−−−
MILLIMETERS
MIN
MAX
2.18
2.38
0.00
0.13
0.63
0.89
0.76
1.14
4.57
5.46
0.46
0.61
0.46
0.61
5.97
6.22
6.35
6.73
2.29 BSC
9.40 10.41
1.40
1.78
2.74 REF
0.51 BSC
0.89
1.27
−−−
1.01
3.93
−−−
SOLDERING FOOTPRINT*
6.20
0.244
2.58
0.102
5.80
0.228
3.00
0.118
1.60
0.063
6.17
0.243
SCALE 3:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MSRD620CTR/D