LM833 D

LM833, NCV833
Low Noise, Audio Dual
Operational Amplifier
The LM833 is a standard low−cost monolithic dual general−purpose
operational amplifier employing Bipolar technology with innovative
high−performance concepts for audio systems applications. With high
frequency PNP transistors, the LM833 offers low voltage noise
(4.5 nV/ Hz ), 15 MHz gain bandwidth product, 7.0 V/ms slew rate,
0.3 mV input offset voltage with 2.0 mV/°C temperature coefficient of
input offset voltage. The LM833 output stage exhibits no dead−band
crossover distortion, large output voltage swing, excellent phase and
gain margins, low open loop high frequency output impedance and
symmetrical source/sink AC frequency response.
For an improved performance dual/quad version, see the MC33079
family.
Features
•
•
•
•
•
•
•
•
•
•
http://onsemi.com
MARKING
DIAGRAMS
8
1
Low Voltage Noise: 4.5 nV/ ǸHz
High Gain Bandwidth Product: 15 MHz
High Slew Rate: 7.0 V/ms
Low Input Offset Voltage: 0.3 mV
Low T.C. of Input Offset Voltage: 2.0 mV/°C
Low Distortion: 0.002%
Excellent Frequency Stability
Dual Supply Operation
NCV Prefix for Automotive and Other Applications Requiring Site
and Change Controls
These Devices are Pb−Free and are RoHS Compliant
MAXIMUM RATINGS
Rating
Supply Voltage (VCC to VEE)
Input Differential Voltage Range (Note 1)
Symbol
Value
Unit
VS
+36
V
VIDR
30
V
V
Input Voltage Range (Note 1)
VIR
±15
Output Short Circuit Duration (Note 2)
tSC
Indefinite
Operating Ambient Temperature Range
TA
−40 to +85
°C
Operating Junction Temperature
TJ
+150
°C
Storage Temperature
Tstg
−60 to +150
°C
ESD Protection at any Pin
− Human Body Model
− Machine Model
Maximum Power Dissipation (Notes 2 and 3)
Vesd
PD
V
600
200
September, 2011 − Rev. 6
1
LM833N
A
WL
YY
WW
G
= Device Code
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
LM833
ALYW
G
SOIC−8
D SUFFIX
CASE 751
1
1
LM833
A
L
Y
W
G
= Device Code
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
PIN CONNECTIONS
Output 1
1
2
1
8
VCC
7
Output 2
Inputs 1
3
6
2
500
mW
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Either or both input voltages must not exceed the magnitude of VCC or VEE.
2. Power dissipation must be considered to ensure maximum junction
temperature (TJ) is not exceeded (see power dissipation performance
characteristic).
3. Maximum value at TA ≤ 85°C.
© Semiconductor Components Industries, LLC, 2011
LM833N
AWL
YYWWG
PDIP−8
N SUFFIX
CASE 626
1
VEE
4
Inputs 2
5
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
Publication Order Number:
LM833/D
LM833, NCV833
ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = −15 V, TA = 25°C, unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Max
Unit
VIO
−
0.3
5.0
mV
DVIO/DT
−
2.0
−
mV/°C
Input Offset Current (VCM = 0 V, VO = 0 V)
IIO
−
10
200
nA
Input Bias Current (VCM = 0 V, VO = 0 V)
IIB
−
300
1000
nA
Common Mode Input Voltage Range
VICR
−
−12
+14
−14
+12
−
V
Large Signal Voltage Gain (RL = 2.0 kW, VO = ±10 V)
AVOL
90
110
−
dB
Output Voltage Swing:
RL = 2.0 kW, VID = 1.0 V
RL = 2.0 kW, VID = 1.0 V
RL = 10 kW, VID = 1.0 V
RL = 10 kW, VID = 1.0 V
VO+
VO−
VO+
VO−
10
−
12
−
13.7
−14.1
13.9
−14.7
−
−10
−
−12
Common Mode Rejection (Vin = ±12 V)
CMR
80
100
−
Power Supply Rejection (VS = 15 V to 5.0 V, −15 V to −5.0 V)
PSR
80
115
−
dB
ID
−
4.0
8.0
mA
Input Offset Voltage (RS = 10 W, VO = 0 V)
Average Temperature Coefficient of Input Offset Voltage
RS = 10 W, VO = 0 V, TA = Tlow to Thigh
Power Supply Current (VO = 0 V, Both Amplifiers)
V
dB
AC ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = −15 V, TA = 25°C, unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Max
Unit
SR
5.0
7.0
−
V/ms
GBW
10
15
−
MHz
Slew Rate (Vin = −10 V to +10 V, RL = 2.0 kW, AV = +1.0)
Gain Bandwidth Product (f = 100 kHz)
Unity Gain Frequency (Open Loop)
fU
−
9.0
−
MHz
Unity Gain Phase Margin (Open Loop)
qm
−
60
−
°
Equivalent Input Noise Voltage (RS = 100 W, f = 1.0 kHz)
en
−
4.5
−
nVń ǸHz
Equivalent Input Noise Current (f = 1.0 kHz)
in
−
0.5
−
pAń ǸHz
Power Bandwidth (VO = 27 Vpp, RL = 2.0 kW, THD ≤ 1.0%)
BWP
−
120
−
kHz
Distortion (RL = 2.0 kW, f = 20 Hz to 20 kHz, VO = 3.0 Vrms, AV = +1.0)
THD
−
0.002
−
%
CS
−
−120
−
dB
1000
800
IIB , INPUT BIAS CURRENT (nA)
PD , MAXIMUM POWER DISSIPATION (mW)
Channel Separation (f = 20 Hz to 20 kHz)
600
400
200
0
-50
0
50
100
TA, AMBIENT TEMPERATURE (°C)
VCC = +15 V
VEE = -15 V
VCM = 0 V
800
600
400
200
0
-55
150
Figure 1. Maximum Power Dissipation
versus Temperature
-25
0
25
50
75
TA, AMBIENT TEMPERATURE (°C)
100
125
Figure 2. Input Bias Current versus Temperature
http://onsemi.com
2
LM833, NCV833
10
TA = 25°C
I S , SUPPLY CURRENT (mA)
I IB , INPUT BIAS CURRENT (nA)
800
600
400
200
0
5.0
10
15
VCC, |VEE|, SUPPLY VOLTAGE (V)
8.0
6.0
RL = ∞
TA = 25°C
VO
+
VEE
4.0
2.0
0
20
VCC
IS
0
5.0
Figure 3. Input Bias Current versus
Supply Voltage
110
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
105
100
95
90
-55
-25
0
25
50
75
TA, AMBIENT TEMPERATURE (°C)
100
RL = 2.0 kW
TA = 25°C
100
90
80
5.0
125
100
45
80
Phase
40
20
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
TA = 25°C
Gain
135
0
1.0
10
100
1.0 k
10 k
100 k
f, FREQUENCY (Hz)
90
1.0 M
180
10 M
GBW, GAIN BANDWIDTH PRODUCT (MHz)
0
60
10
15
VCC, |VEE|, SUPPLY VOLTAGE (V)
20
Figure 6. DC Voltage Gain versus
Supply Voltage
∅ , EXCESS PHASE (DEGREES)
AVOL, OPEN LOOP VOLTAGE GAIN (dB)
Figure 5. DC Voltage Gain
versus Temperature
120
20
Figure 4. Supply Current versus
Supply Voltage
AVOL, DC VOLTAGE GAIN (dB)
AVOL, DC VOLTAGE GAIN (dB)
110
10
15
VCC, |VEE|, SUPPLY VOLTAGE (V)
20
15
10
5.0
0
-55
Figure 7. Open Loop Voltage Gain and
Phase versus Frequency
VCC = +15 V
VEE = -15 V
f = 100 kHz
-25
0
25
50
75
TA, AMBIENT TEMPERATURE (°C)
100
Figure 8. Gain Bandwidth Product
versus Temperature
http://onsemi.com
3
125
LM833, NCV833
GBW, GAIN BANDWIDTH PRODUCT (MHz)
30
10
SR, SLEW RATE (V/ μs)
f = 100 kHz
TA = 25°C
20
10
0
5.0
10
15
VCC, |VEE|, SUPPLY VOLTAGE (V)
8.0
Falling
Rising
6.0
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
AV = +1.0
4.0
2.0
-55
20
Figure 9. Gain Bandwidth Product versus
Supply Voltage
SR, SLEW RATE (V/ μ s)
8.0
RL = 2.0k W
AV = +1.0
TA = 25°C
Falling
4.0
+
Vin
2.0
0
25
50
75
TA, AMBIENT TEMPERATURE (°C)
VO
RL
100
125
35
Rising
6.0
+
Figure 10. Slew Rate versus Temperature
VO , OUTPUT VOLTAGE (V pp )
10
-25
Vin
VO
RL
30
25
20
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
THD v 1.0%
TA = 25°C
15
10
5.0
0
5.0
10
15
VCC, |VEE|, SUPPLY VOLTAGE (V)
0
20
10
VO, OUTPUT VOLTAGE (V pp )
20
15
RL = 10 kW
TA = 25°C
VO +
10
5.0
0
-5.0
-10
VO -
-15
-20
5.0
10
15
VCC, |VEE|, SUPPLY VOLTAGE (V)
1.0 k
10 k
1.0 M
f, FREQUENCY (Hz)
10 M
100 k
Figure 12. Output Voltage versus Frequency
V sat , OUTPUT SATURATION VOLTAGE |V|
Figure 11. Slew Rate versus Supply Voltage
100
20
15
+Vsat
-Vsat
14
VCC = +15 V
VEE = -15 V
RL = 10 kW
13
-55
Figure 13. Maximum Output Voltage
versus Supply Voltage
-25
0
25
50
75
TA, AMBIENT TEMPERATURE (°C)
100
Figure 14. Output Saturation Voltage
versus Temperature
http://onsemi.com
4
125
LM833, NCV833
VCC = +15 V
VEE = -15 V
TA = 25°C
120
100
80
160
DVCC
CMR, COMMON MODE REJECTION (dB)
PSR, POWER SUPPLY REJECTION (dB)
140
-
ADM
DVO
+
DVEE
-PSR
+PSR
60
40
20
+PSR = 20 Log
-PSR = 20 Log
0
100
1.0 k
DVO/ADM
( DVCC )
( DVDVO/AEEDM )
10 k
100 k
f, FREQUENCY (Hz)
1.0 M
140
80
60
40
20
100
10 M
VCC = +15 V
VEE = -15 V
VCM = 0 V
DVCM = ±1.5 V
TA = 25°C
1.0 k
-
1.0 M
10 M
Figure 16. Common Mode Rejection
versus Frequency
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
TA = 25°C
VO
RL
0.01
VO = 1.0 Vrms
VO = 3.0 Vrms
100
1.0 k
10 k
5.0
VCC = +15 V
VEE = -15 V
RS = 100 W
TA = 25°C
2.0
1.0
10
100 k
100
f, FREQUENCY (Hz)
Figure 17. Total Harmonic Distortion
versus Frequency
2.0
100
VCC = +15 V
VEE = -15 V
TA = 25°C
1.0
0.7
0.5
0.4
0.3
100
1.0 k
f, FREQUENCY (Hz)
10 k
1.0 k
f, FREQUENCY (Hz)
10 k
100 k
Figure 18. Input Referred Noise Voltage
versus Frequency
e n, INPUT NOISE VOLTAGE (nV/√ Hz )
i n , INPUT NOISE CURRENT (pA/ √ Hz )
10 k
100 k
f, FREQUENCY (Hz)
10
+
0.2
10
DVO
DVCM
× ADM
DV0
100
e n, INPUT NOISE VOLTAGE (nV/√ Hz )
THD, TOTAL HARMONIC DISTORTION (%)
+
CMR = 20 Log
1.0
0.001
10
-
ADM
120
Figure 15. Power Supply Rejection
versus Frequency
0.1
DVCM
100 k
VCC = +15 V
VEE = -15 V
Vn(total) = (inRS)2 +en2 + Ǹ
4KTRS
TA = 25°C
10
1.0
1.0
10
100
1.0 k
10 k
100 k
RS, SOURCE RESISTANCE (W)
Figure 19. Input Referred Noise Current
versus Frequency
Figure 20. Input Referred Noise Voltage
versus Source Resistance
http://onsemi.com
5
1.0 M
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
CL = 0 pF
AV = -1.0
TA = 25°C
VO , OUTPUT VOLTAGE (5.0 V/DIV)
VO , OUTPUT VOLTAGE (5.0 V/DIV)
LM833, NCV833
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
CL = 0 pF
AV = +1.0
TA = 25°C
t, TIME (2.0 ms/DIV)
t, TIME (2.0 ms/DIV)
VO , OUTPUT VOLTAGE (10 mV/DIV)
Figure 21. Inverting Amplifier
Figure 22. Noninverting Amplifier Slew Rate
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
CL = 0 pF
AV = +1.0
TA = 25°C
t, TIME (200 ns/DIV)
Figure 23. Noninverting Amplifier Overshoot
ORDERING INFORMATION
Package
Shipping†
LM833NG
PDIP−8
(Pb−Free)
50 Units / Rail
LM833DG
SOIC−8
(Pb−Free)
98 Units / Rail
LM833DR2G
SOIC−8
(Pb−Free)
2500 / Tape & Reel
NCV833DR2G*
SOIC−8
(Pb−Free)
2500 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NCV prefix indicates qualified for automotive use.
http://onsemi.com
6
LM833, NCV833
PACKAGE DIMENSIONS
PDIP−8
N SUFFIX
CASE 626−05
ISSUE M
D
A
D1
E
8
5
E1
1
4
NOTE 5
F
c
E2
END VIEW
TOP VIEW
NOTE 3
e/2
A
L
A1
C
SEATING
PLANE
E3
e
8X
SIDE VIEW
b
0.010
M
C A
END VIEW
http://onsemi.com
7
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. DIMENSION E IS MEASURED WITH THE LEADS RESTRAINED PARALLEL AT WIDTH E2.
4. DIMENSION E1 DOES NOT INCLUDE MOLD FLASH.
5. ROUNDED CORNERS OPTIONAL.
DIM
A
A1
b
C
D
D1
E
E1
E2
E3
e
L
INCHES
NOM
MAX
−−−− 0.210
−−−− −−−−
0.018 0.022
0.010 0.014
0.365 0.400
−−−− −−−−
0.310 0.325
0.250 0.280
0.300 BSC
−−−−
−−−− 0.430
0.100 BSC
0.115 0.130 0.150
MIN
−−−−
0.015
0.014
0.008
0.355
0.005
0.300
0.240
MILLIMETERS
MIN
NOM
MAX
−−−−
−−−−
5.33
0.38
−−−− −−−−
0.35
0.46
0.56
0.20
0.25
0.36
9.02
9.27 10.02
0.13
−−−− −−−−
7.62
7.87
8.26
6.10
6.35
7.11
7.62 BSC
−−−−
−−−− 10.92
2.54 BSC
2.92
3.30
3.81
LM833, NCV833
PACKAGE DIMENSIONS
SOIC−8
D SUFFIX
CASE 751−07
ISSUE AK
−X−
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
6. 751−01 THRU 751−06 ARE OBSOLETE. NEW
STANDARD IS 751−07.
A
8
5
S
B
0.25 (0.010)
M
Y
M
1
4
−Y−
K
G
C
N
DIM
A
B
C
D
G
H
J
K
M
N
S
X 45 _
SEATING
PLANE
−Z−
0.10 (0.004)
H
D
0.25 (0.010)
M
Z Y
S
X
M
J
S
MILLIMETERS
MIN
MAX
4.80
5.00
3.80
4.00
1.35
1.75
0.33
0.51
1.27 BSC
0.10
0.25
0.19
0.25
0.40
1.27
0_
8_
0.25
0.50
5.80
6.20
INCHES
MIN
MAX
0.189
0.197
0.150
0.157
0.053
0.069
0.013
0.020
0.050 BSC
0.004
0.010
0.007
0.010
0.016
0.050
0 _
8 _
0.010
0.020
0.228
0.244
SOLDERING FOOTPRINT*
1.52
0.060
7.0
0.275
4.0
0.155
0.6
0.024
1.270
0.050
SCALE 6:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
8
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
LM833/D