5614

1N5614/US
1N5616/US
1N5618/US
1N5620/US
1N5622/US
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 116, REV. C
SS
HERMETIC AXIAL LEAD / MELF
GENERAL PURPOSE RECTIFIER
DESCRIPTION: A 200/400/600/800/1000 VOLT, 1.0 AMP, AXIAL LEAD/SURFACE MOUNT
2000 NS GLASS RECTIFIER.
All ratings are at TA = 25oC unless otherwise specified.
MAXIMUM RATINGS
RATING
CONDITIONS
MIN
TYP
Peak Inverse Voltage
(PIV)
1N5614
1N5616
1N5618
1N5620
1N5622
-
-
Average DC Output
Current (Io) TC = 55 °C
TC = 100 °C
-
MAX
UNIT
Vdc
200
400
600
800
1000
-
Amps
1.0
0.75
Peak Single Cycle Surge
Current (Ifsm)
tp = 8.3 ms Single
Half Cycle Sine
Wave,
Superimposed On
Rated Load
-
-
30
Amps(pk)
Thermal Resistance (θJL)
Junction to Lead
d = 0.375”
-
-
36
°C/W
Thermal Resistance (θJEC)
Junction to Endcap
-
-
13
°C/W
Operating and Storage
Temp. (Top & Tstg)
-
-65
-
+175
°C
MIN
TYP
MAX
UNIT
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
CONDITIONS
Maximum Forward
Voltage (Vf)
IF = 3.0A (300 μsec
pulse, duty cycle <
2%)
-
-
1.3
Volts
Maximum Instantaneous
Reverse Current At Rated
(PIV)
TA = 25° C
TA = 100° C
-
-
0.5
25
μAmps
μAmps
Maximum Reverse
Recovery Time
IF = 0.5A, IR = 1.0A
IRR = 0.25A
-
-
2000
ns
©1997 Sensitron Semiconductor • 221 West Industry Court Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798 • www.sensitron.com • [email protected]
1N5614/US
1N5616/US
1N5618/US
1N5620/US
1N5622/US
SENSITRON
TECHNICAL DATA
DATA SHEET 116, REV. C
SS
MECHANICAL DIMENSIONS: in inches / mm
0.033 (.84
0.026 .66)
.225 (5.72
.130 3.30)
.110 (2.79
.065 1.65)
1.30 (33.0
1.00 25.4)
PKG. 102
.028 (.72
.019 .48)
0.20 R Max
(5.08)
.003 Min
(.076)
.128 (3.8
.091 3.4)
.128 (3.8
.091 3.4 )
.230 (5.9
.168 4.2)
MELF-1
©1997 Sensitron Semiconductor • 221 West Industry Court Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798 • www.sensitron.com • [email protected]
SENSITRON
TECHNICAL DATA
DATA SHEET 116, REV. C
1N5614/US
1N5616/US
1N5618/US
1N5620/US
1N5622/US
SS
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©1997 Sensitron Semiconductor • 221 West Industry Court Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798 • www.sensitron.com • [email protected]