MBR10Hxx, MBRF10Hxx, MBRB10Hxx Datasheet

MBR10Hxx, MBRF10Hxx, MBRB10Hxx
www.vishay.com
Vishay General Semiconductor
High Voltage Schottky Rectifier
High Barrier Technology for Improved High Temperature Performance
FEATURES
TO-220AC
ITO-220AC
2
2
1
1
MBR10H90
MBR10H100
MBRF10H90
MBRF10H100
PIN 1
PIN 1
CASE
PIN 2
PIN 2
TO-263AB
K
2
1
MBRB10H90
MBRB10H100
Power pack
Guardring for overvoltage protection
Low power loss, high efficiency
Low forward voltage drop
Low leakage current
High forward surge capability
High frequency operation
Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C (for TO-263AB package)
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AC and ITO-220AC package)
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
PIN 1
PIN 2
•
•
•
•
•
•
•
•
K
HEATSINK
For use in high frequency rectifier of switching mode
power supplies, freewheeling diodes, DC/DC converters, or
polarity protection application.
MECHANICAL DATA
PRIMARY CHARACTERISTICS
IF(AV)
10 A
VRRM
90 V to 100 V
IFSM
250 A
VF
0.64 V
IR
4.5 μA
TJ max.
175 °C
Package
TO-220AC, ITO-220AC, TO-263AB
Diode variations
Single
Case: TO-220AC, ITO-220AC, TO-263AB
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
SYMBOL
MBR10H90
MBR10H100
Maximum repetitive peak reverse voltage
VRRM
90
100
Working peak reverse voltage
VRWM
90
100
Maximum DC blocking voltage
VDC
90
Maximum average forward rectified current
IF(AV)
10
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
250
PARAMETER
UNIT
V
100
A
Peak repetitive reverse current at tp = 2.0 µs, 1 kHz
IRRM
0.5
Voltage rate of change (rated VR)
dV/dt
10 000
V/μs
TJ, TSTG
-65 to +175
°C
VAC
1500
V
Operating junction and storage temperature range
Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min
Revision: 28-Jul-15
Document Number: 88667
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR10Hxx, MBRF10Hxx, MBRB10Hxx
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VF (1)
Maximum instantaneous forward voltage
IR (2)
Maximum reverse current
VALUE
TEST CONDITIONS
IF = 10 A
TC = 25 °C
0.77
UNIT
IF = 10 A
TC = 125 °C
0.64
IF = 20 A
TC = 25 °C
0.88
IF = 20 A
TC = 125 °C
0.73
TJ = 25 °C
4.5
μA
TJ = 125 °C
6.0
mA
Rated VR
V
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance
SYMBOL
MBR
MBRF
MBRB
UNIT
RJC
2.7
5.8
2.7
°C/W
ORDERING INFORMATION (Example)
PACKAGE
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AC
MBR10H100-E3/45
PREFERRED P/N
1.80
45
50/tube
Tube
ITO-220AC
MBRF10H100-E3/45
1.94
45
50/tube
Tube
TO-263AB
MBRB10H100-E3/45
1.33
45
50/tube
Tube
TO-263AB
MBRB10H100-E3/81
1.33
81
800/reel
Tape and reel
TO-220AC
MBR10H100HE3/45 (1)
1.80
45
50/tube
Tube
ITO-220AC
MBRF10H100HE3/45 (1)
1.94
45
50/tube
Tube
TO-263AB
MBRB10H100HE3/45
(1)
1.33
45
50/tube
Tube
TO-263AB
MBRB10H100HE3/81 (1)
1.33
81
800/reel
Tape and reel
Note
(1) AEC-Q101 qualified
Revision: 28-Jul-15
Document Number: 88667
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR10Hxx, MBRF10Hxx, MBRB10Hxx
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TC = 25 °C unless otherwise noted)
10 000
Instantaneous Reverse Current (µA)
20
Average Forward Current (A)
Resistive or Inductive Load
16
MBR, MBRB
12
8
4
MBRF
TJ = 125 °C
1000
TJ = 100 °C
100
10
1
0.1
TJ = 25 °C
0.01
0
50
0
150
100
20
180
40
60
80
Case Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Forward Current Derating Curve
Fig. 4 - Typical Reverse Characteristics
300
10 000
250
200
150
100
50
0
1000
100
10
1
100
10
0.1
1
10
Number of Cycles at 60 Hz
Reverse Voltage (V)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Fig. 5 - Typical Junction Capacitance
Transient Thermal Impedance (°C/W)
TJ = 175 °C
10
TJ = 125 °C
TJ = 150 °C
TJ = 100 °C
1.0
TJ = 25 °C
0.1
0.01
0.1
100
100
100
Instantaneous Forward Current (A)
100
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
Junction Capacitance (pF)
Peak Forward Surge Current (A)
TJ = 150 °C
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
10
1
0.1
0.01
0.1
1
10
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Revision: 28-Jul-15
Document Number: 88667
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR10Hxx, MBRF10Hxx, MBRB10Hxx
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
ITO-220AC
TO-220AC
0.404 (10.26)
0.384 (9.75)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91) DIA.
0.148 (3.74) DIA.
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
1
PIN
0.350 (8.89)
0.330 (8.38)
0.160 (4.06)
0.140 (3.56)
0.057 (1.45)
0.045 (1.14)
0.603 (15.32)
0.573 (14.55)
0.671 (17.04)
0.651 (16.54)
0.600 (15.24)
0.580 (14.73)
PIN
1
0.205 (5.20)
0.195 (4.95)
TO-263AB
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
0.035 (0.89)
0.025 (0.64)
Mounting Pad Layout
0.42 (10.66) MIN.
0.055 (1.40)
0.045 (1.14)
0.33 (8.38) MIN.
0.360 (9.14)
0.320 (8.13)
K
2
0.624 (15.85)
0.591 (15.00)
0.055 (1.40)
0.047 (1.19)
0.670 (17.02)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.028 (0.71)
0.020 (0.51)
0.205 (5.21)
0.195 (4.95)
K
1
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.025 (0.64)
0.015 (0.38)
0.022 (0.56)
0.014 (0.36)
7° REF.
0.191 (4.85)
0.171 (4.35)
CASE
0.037 (0.94)
0.027 (0.68)
7° REF.
2
0.560 (14.22)
0.530 (13.46)
0.560 (14.22)
0.530 (13.46)
PIN 1
0.135 (3.43) DIA.
0.122 (3.08) DIA.
0.350 (8.89)
0.330 (8.38)
0.110 (2.79)
0.100 (2.54)
PIN 2
0.105 (2.67)
0.095 (2.41)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
1.148 (29.16)
1.118 (28.40)
2
7° REF.
0.076 (1.93) REF.
45° REF.
0.635 (16.13)
0.625 (15.87)
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.076 (1.93) REF.
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
Revision: 28-Jul-15
Document Number: 88667
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000