MBR25HxxCT, MBRF25HxxCT, MBRB25HxxCT www.vishay.com Vishay General Semiconductor Dual Common Cathode Schottky Rectifier High Barrier Technology for Improved High Temperature Performance TO-220AB FEATURES ITO-220AB 2 3 1 1 MBR25HxxCT PIN 1 PIN 2 PIN 3 CASE 2 3 MBRF25HxxCT PIN 1 PIN 2 PIN 3 TO-263AB K 2 1 For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters, or polarity protection application. K HEATSINK PIN 2 Power pack Guardring for overvoltage protection Lower power losses, high efficiency Low forward voltage drop Low leakage current High forward surge capability High frequency operation Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder bath temperature 275 °C maximum, 10 s, per JESD 22-B106 (for TO-220AB and ITO-220AB package) • AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS MBRB25HxxCT PIN 1 • • • • • • • • MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 2 x 15 A VRRM 35 V to 60 V IFSM 150 A VF 0.54 V, 0.60 V IR 100 μA Case: TO-220AB, ITO-220AB, TO-263AB Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test TJ max. 175 °C Package TO-220AB, ITO-220AB, TO-263AB Diode variations Common cathode Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR25H35CT MBR25H45CT MBR25H50CT MBR25H60CT Maximum repetitive peak reverse voltage VRRM 35 45 50 60 Working peak reverse voltage VRWM 35 45 50 60 Maximum DC blocking voltage VDC 35 45 50 60 Max. average forward rectified current (fig. 1) total device per diode 30 IF(AV) UNIT V A 15 Non-repetitive avalanche energy per diode at 25 °C, IAS = 4 A, L = 10 mH EAS 80 mJ Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 150 A Peak repetitive reverse surge current per diode at tp = 2.0 μs, 1 kHz IRRM 1.0 0.5 A Peak non-repetitive reverse energy (8/20 μs waveform) ERSM 25 20 mJ Revision: 12-Jun-13 Document Number: 88789 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR25HxxCT, MBRF25HxxCT, MBRB25HxxCT www.vishay.com Vishay General Semiconductor MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER Electrostatic discharge capacitor voltage Human body model: C = 100 pF, R = 1.5 k Voltage rate of change (rated VR) Operating junction and storage temperature range Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min SYMBOL MBR25H35CT MBR25H45CT MBR25H50CT MBR25H60CT UNIT VC 25 kV dV/dt 10 000 V/μs TJ, TSTG - 65 to + 175 °C VAC 1500 V ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL Maximum instantaneous forward voltage per diode IF = 15 A VF (1) IF = 30 A Maximum reverse current per diode IR (2) MBR25H35CT MBR25H45CT TEST CONDITIONS Rated VR TYP. MAX. MBR25H50CT MBR25H60CT TYP. MAX. 0.70 TJ = 25 °C - 0.64 - TJ = 125 °C 0.50 0.54 0.56 0.60 TJ = 25 °C - 0.74 - 0.85 UNIT V TJ = 125 °C 0.63 0.67 0.68 0.72 TJ = 25 °C - 100 - 100 μA TJ = 125 °C 6.0 20 4.0 20 mA Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Thermal resistance, junction to case per diode SYMBOL MBR MBRF MBRB UNIT RJC 1.5 4.5 1.5 °C/W ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB MBR25H45CT-E3/45 PREFERRED P/N 1.85 45 50/tube Tube ITO-220AB MBRF25H45CT-E3/45 1.99 45 50/tube Tube TO-263AB MBRB25H45CT-E3/45 1.35 45 50/tube Tube TO-263AB MBRB25H45CT-E3/81 1.35 81 800/reel Tape and reel TO-220AB MBR25H45CTHE3/45 (1) 1.85 45 50/tube Tube ITO-220AB MBRF25H45CTHE3/45 (1) 1.99 45 50/tube Tube TO-263AB MBRB25H45CTHE3/45 (1) 1.35 45 50/tube Tube TO-263AB MBRB25H45CTHE3/81 (1) 1.35 81 800/reel Tape and reel Note (1) AEC-Q101 qualified Revision: 12-Jun-13 Document Number: 88789 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR25HxxCT, MBRF25HxxCT, MBRB25HxxCT www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 100 MBR, MBRB 30 MBRF 20 10 0 10 TJ = 150 °C 1 TJ = 125 °C 0.1 MBR25H35CT, MBR25H45CT MBR25H50CT, MBR25H60CT 0.01 0.001 TJ = 25 °C 0.0001 0 25 50 75 100 125 150 0 175 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Forward Derating Curve (Total) Fig. 4 - Typical Reverse Characteristics Per Diode 10 000 TJ = TJ Max. 8.3 ms Single Half Sine-Wave Junction Capacitance (pF) 125 100 75 50 25 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 MBR25H35CT, MBR25H45CT MBR25H50CT, MBR25H60CT 0 100 1 10 100 0.1 Number of Cycles at 60 Hz 1 10 100 Reverse Voltage (V) Fig. 5 - Typical Junction Capacitance Per Diode Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Diode 10 TJ = 150 °C 10 TJ = 25 °C 1 TJ = 125 °C 0.1 MBR25H35CT, MBR25H45CT MBR25H50CT, MBR25H60CT 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Transient Thermal Impedance (°C/W) 100 Instantaneous Forward Current (A) 20 Case Temperature (°C) 150 Peak Forward Surge Current (A) Instantaneous Reverse Leakage Current (mA) Average Forward Current (A) 40 1 0.1 0.01 0.1 1 10 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode Fig. 6 - Typical Transient Thermal Impedance Per Diode Revision: 12-Jun-13 Document Number: 88789 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR25HxxCT, MBRF25HxxCT, MBRB25HxxCT www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB ITO-220AB 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.603 (15.32) 0.573 (14.55) 0.635 (16.13) 0.625 (15.87) 0.160 (4.06) 0.140 (3.56) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.191 (4.85) 0.171 (4.35) 0.035 (0.89) 0.025 (0.64) Mounting Pad Layout 0.42 (10.66) MIN. 0.055 (1.40) 0.045 (1.14) 0.33 (8.38) MIN. 0.360 (9.14) 0.320 (8.13) K 2 0.624 (15.85) 0.591 (15.00) Revision: 12-Jun-13 0.055 (1.40) 0.047 (1.19) 0.670 (17.02) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) K 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) TO-263AB 0.245 (6.22) MIN. 3 0.057 (1.45) 0.045 (1.14) 0.022 (0.56) 0.014 (0.36) 0.190 (4.83) 0.160 (4.06) 2 7° REF. 0.350 (8.89) 0.330 (8.38) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.411 (10.45) 0.380 (9.65) 0.671 (17.04) 0.651 (16.54) PIN 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.560 (14.22) 0.530 (13.46) 0.205 (5.20) 0.195 (4.95) 7° REF. 0.076 (1.93) REF. 45° REF. 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 3 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) Document Number: 88789 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000