MMBTRC116SS ... MMBTRC121SS MMBTRC116SS ... MMBTRC121SS Surface Mount Bias Resistor Transistors SMD Transistoren mit Eingangsspannungsteiler NPN NPN Version 2015-05-12 1 1.3±0.1 Type Code 200 mW Plastic case Kunststoffgehäuse 3 2.4 ±0.2 0.4 Power dissipation – Verlustleistung +0.1 1.1 -0.2 2.9 ±0.1 +0.1 -0.05 SOT-23 (TO-236) Weight approx. – Gewicht ca. 0.01 g Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert 2 1.9±0.1 Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Dimensions - Maße [mm] 1 = In 2 = Gnd 3 = Out Maximum ratings and characteristics (TA = 25°C) Grenz- und Kennwerte (TA = 25°C) Resistor combinations – Widerstandskombinationen R1 [kΩ] R2 [kΩ] MMBTRC116SS 1 10 MMBTRC117SS 2.2 2.2 MMBTRC118SS 2.2 10 MMBTRC119SS 4.7 10 MMBTRC120SS 10 4.7 MMBTRC121SS 47 10 Input-voltage – Eingangs-Spannung VI MMBTRC116SS -5 ... +10 V MMBTRC117SS -10 ... +12 V MMBTRC118SS -5 ... +12 V MMBTRC119SS -7 ... +20 V MMBTRC120SS -10 ... +30 V MMBTRC121SS -15 ... +40 V Output voltage – Ausgangs-Spannung VO 50 V Output current – Ausgangs-Strom IO 100 mA Power dissipation – Verlustleistung Ptot 200 mW 1) Junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Tj TS -55...+150°C -55…+150°C 3 Output R1 R2 Input 1 1 2 Ground Valid, if leads are kept at ambient temperature at a distance of 2 mm from case Gültig wenn die Anschlussdrähte in 2 mm Abstand vom Gehäuse auf Umgebungstemperatur gehalten werden © Diotec Semiconductor AG http://www.diotec.com/ 1 MMBTRC116SS ... MMBTRC121SS Characteristics (Tj = 25°C) Kennwerte (Tj = 25°C) Min. Typ. Max. MMBTRC116SS 33 – – MMBTRC117SS 20 – – MMBTRC118SS 33 – – MMBTRC119SS 30 – – MMBTRC120SS 24 – – MMBTRC121SS 33 – – IO(off) – – 500 nA MMBTRC116SS – – 7.2 mA MMBTRC117SS – – 3.8 mA MMBTRC118SS – – 3.8 mA MMBTRC119SS – – 1.8 mA MMBTRC120SS – – 0.88 mA MMBTRC121SS – – 0.16 mA VO(on) – – 0.3 V DC current gain – Kollektor-Basis-Stromverhältnis 1) VO = 5 V, IO = 10 mA Output cutoff current – Ausgangs-Reststrom VO = 50 V Input current – Eingangsstrom GI II VI = 5 V Output voltage – Ausgangs-Spannung IO = 10 mA, II = 0.5 mA Input voltage (on) – Eingangsspannung (Ein) VI(on) VO = 0.3 V, IO = 20 mA MMBTRC116SS – – 3V VO = 0.3 V, IO = 20 mA MMBTRC117SS – – 3V VO = 0.3 V, IO = 20 mA MMBTRC118SS – – 3V VO = 0.3 V, IO = 20 mA MMBTRC119SS – – 2.5 V VO = 0.3 V, IO = 2 mA MMBTRC120SS – – 3V VO = 0.3 V, IO = 2 mA MMBTRC121SS – – 5V R1 -30% Input resistor tolerance – Toleranz Eingangswiderstand Input voltage (off) – Eingangs-Spannung (Aus) VO = 5 V, IO = 0.1 mA +30% VI(off) MMBTRC116SS 0.3 MMBTRC117SS 0.5 MMBTRC118SS 0.3 MMBTRC119SS 0.3 MMBTRC120SS 0.8 MMBTRC121SS 1 fT – Transition Frequency – Transitfrequenz (Transistor) VO = 10 V, IO = 5 mA 1 2 250 MHz – Tested with pulses tp = 300 µs, duty cycle ≤ 2% – Gemessen mit Impulsen tp = 300 µs, Schaltverhältnis ≤ 2% http://www.diotec.com/ © Diotec Semiconductor AG