MMBTRC101SS ... MMBTRC106SS MMBTRC101SS ... MMBTRC106SS Surface Mount Bias Resistor Transistors SMD Transistoren mit Eingangsspannungsteiler NPN NPN Version 2011-02-10 Power dissipation – Verlustleistung 1.1 2.9 ±0.1 0.4 Plastic case Kunststoffgehäuse 1 1.3±0.1 2.5 max 3 Type Code 200 mW SOT-23 (TO-236) Weight approx. – Gewicht ca. 0.01 g Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert 2 1.9 Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Dimensions - Maße [mm] 1 = In 2 = Gnd 3 = Out Maximum ratings and characteristics (TA = 25°C) Grenz- und Kennwerte (TA = 25°C) Resistor combinations – Widerstandskombinationen R1 [kΩ] R2 [kΩ] MMBTRC101SS 4.7 4.7 MMBTRC102SS 10 10 MMBTRC103SS 22 22 MMBTRC104SS 47 47 MMBTRC105SS 2.2 47 MMBTRC106SS 4.7 47 Input-voltage – Eingangs-Spannung VI MMBTRC101SS -10 ... +20 V MMBTRC102SS -10 ... +30 V MMBTRC103SS -10 ... +40 V MMBTRC104SS -10 ... +40 V MMBTRC105SS -5 ... +12 V MMBTRC106SS -5 ... +20 V Output voltage – Ausgangs-Spannung VO 50 V Output current – Ausgangs-Strom IO 100 mA Power dissipation – Verlustleistung Ptot 200 mW 1) Junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Tj TS -55...+150°C -55…+150°C 3 Output R1 R2 Input 1 1 2 Ground Valid, if leads are kept at ambient temperature at a distance of 2 mm from case Gültig wenn die Anschlussdrähte in 2 mm Abstand vom Gehäuse auf Umgebungstemperatur gehalten werden © Diotec Semiconductor AG http://www.diotec.com/ 1 MMBTRC101SS ... MMBTRC106SS Characteristics (Tj = 25°C) Kennwerte (Tj = 25°C) Min. Typ. Max. MMBTRC101SS 30 – – MMBTRC102SS 50 – – MMBTRC103SS 70 – – MMBTRC104SS 80 – – MMBTRC105SS 80 – – MMBTRC106SS 80 – – IO(off) – – 500 nA MMBTRC101SS – – 1.8 mA MMBTRC102SS – – 0.88 mA MMBTRC103SS – – 0.36 mA MMBTRC104SS – – 0.18 mA MMBTRC105SS – – 3.6 mA MMBTRC106SS – – 1.8 mA VO(on) – – 0.3 V MMBTRC101SS – – 2V MMBTRC102SS – – 2.4 V MMBTRC103SS – – 3V MMBTRC104SS – – 5V MMBTRC105SS – – 1.1 V MMBTRC106SS – – 1.3 V ..C101...C104.. 1V – – ..C105...C106.. 0.5 V – – R1 -30% +30% MMBTRC101SS 0.8 1.2 MMBTRC102SS 0.8 1.2 MMBTRC103SS 0.8 1.2 MMBTRC104SS 0.8 1.2 MMBTRC105SS 0.026 0.087 MMBTRC106SS 0.055 0.185 fT – DC current gain – Kollektor-Basis-Stromverhältnis 1) VO = 5 V, IO = 10 mA Output cutoff current – Ausgangs-Reststrom VO = 50 V Input current – Eingangsstrom GI II VI = 5 V Output voltage – Ausgangs-Spannung IO = 10 mA, II = 0.5 mA Input voltage (on) – Eingangsspannung (Ein) VO = 0.2 V, IO = 5 mA Input voltage (off) – Eingangs-Spannung (Aus) VO = 5 V, IO = 0.1 mA VI(on) VI(off) Input resistor tolerance – Toleranz Eingangswiderstand Resistance ratio – Widerstandsverhältnis R2/R1 Transition Frequency – Transitfrequenz (Transistor) VO = 10 V, IO = 5 mA 1 2 200 MHz – Tested with pulses tp = 300 µs, duty cycle ≤ 2% – Gemessen mit Impulsen tp = 300 µs, Schaltverhältnis ≤ 2% http://www.diotec.com/ © Diotec Semiconductor AG