MMBT3904 MMBT3904 Surface Mount Si-Epi-Planar Switching Transistors Si-Epi-Planar Schalttransistoren für die Oberflächenmontage NPN NPN Version 2010-04-14 Power dissipation – Verlustleistung 1.1 2.9 ±0.1 0.4 Plastic case Kunststoffgehäuse 1 1.3±0.1 2.5 max 3 Type Code 250 mW SOT-23 (TO-236) Weight approx. – Gewicht ca. 0.01 g Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert 2 1.9 Dimensions - Maße [mm] 1=B 2=E 3=C Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Maximum ratings (TA = 25°C) Grenzwerte (TA = 25°C) MMBT3904 Collector-Emitter-volt. – Kollektor-Emitter-Spannung B open VCEO 40 V Collector-Base-voltage – Kollektor-Basis-Spannung E open VCBO 60 V Emitter-Base-voltage – Emitter-Basis-Spannung C open VEBO 6V Power dissipation – Verlustleistung Ptot 350 mW 1) Collector current – Kollektorstrom (dc) IC 200 mA Junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Tj TS -55...+150°C -55…+150°C Characteristics (Tj = 25°C) Kennwerte (Tj = 25°C) Min. Typ. Max. hFE hFE hFE hFE hFE 40 80 100 60 30 – – – – – – – 300 – – Small signal current gain – Kleinsignal-Stromverstärkung hfe 100 – 400 Input impedance – Eingangs-Impedanz hie 1 kΩ – 10 kΩ Output admittance – Ausgangs-Leitwert hoe 1 µS – 40 µS – 8*10-4 2 DC current gain – Kollektor-Basis-Stromverhältnis ) IC IC IC IC IC = = = = = 0.1 mA, 1 mA, 10 mA, 50 mA, 100 mA, VCE VCE VCE VCE VCE = = = = = 1 1 1 1 1 V V V V V h-Parameters at/bei VCE = 10 V, IC = 1 mA, f = 1 kHz Reverse voltage transfer ratio – Spannungsrückwirkung 1 2 hre -4 0.5*10 Valid, if leads are kept at ambient temperature Gültig, wenn die Anschlüsse auf Umgebungstemperatur gehalten werden Tested with pulses tp = 300 µs, duty cycle ≤ 2% – Gemessen mit Impulsen tp = 300 µs, Schaltverhältnis ≤ 2% © Diotec Semiconductor AG http://www.diotec.com/ 1 MMBT3904 Characteristics (Tj = 25°C) Kennwerte (Tj = 25°C) Min. Typ. Max. VCEsat VCEsat – – – – 0.2 V 0.3 V VBEsat VBEsat 0.65 V – – – 0.85 V 0.95 V ICBX – – 50 nA IEBV – –- 50 nA fT 300 MHz – – CCBO – – 4 pF CEBO – – 8 pf F – – 5 dB VCC = 3 V, VBE = 0.5 V IC = 10 mA, IB1 = 1mA td – – 35 ns tr – – 35 ns VCC = 3 V, IC = 10 mA, IB1 = IB2 = 1 mA ts – – 200 ns tf – – 50 ns Collector-Emitter saturation voltage – Kollektor-Sättigungsspannung 2) IC = 10 mA, IB = 1 mA IC = 50 mA, IB = 5 mA Base-Emitter saturation voltage – Basis-Sättigungsspannung 2) IC = 10 mA, IB = 1 mA IC = 50 mA, IB = 5 mA Collector-Base cutoff current – Kollektor-Basis-Reststrom VCE = 30 V, VEB = 3 V Emitter-Base cutoff current – Emitter-Basis-Reststrom - VCE = 30 V, - VEB = 3 V Gain-Bandwidth Product – Transitfrequenz IC = 10 mA, VCE = 20 V, f = 100 MHz Collector-Base Capacitance – Kollektor-Basis-Kapazität VCB = 5 V, IE = ie = 0, f = 1 MHz Emitter-Base Capacitance – Emitter-Basis-Kapazität VEB = 0.5 V, IC = ic = 0, f = 1 MHz Noise figure – Rauschzahl VCE = 5 V, IC = 1 µA, RG = 1 kΩ, f = 1 kHz Switching times – Schaltzeiten (between 10% and 90% levels) delay time rise time storage time fall time Thermal resistance junction to ambient air Wärmewiderstand Sperrschicht – umgebende Luft Recommended complementary PNP transistors Empfohlene komplementäre PNP-Transistoren Marking - Stempelung 2 1 2 RthA < 357 K/W 1) MMBT3906 MMBT3904 = 1AM or 1E Tested with pulses tp = 300 µs, duty cycle ≤ 2% – Gemessen mit Impulsen tp = 300 µs, Schaltverhältnis ≤ 2% Valid, if leads are kept at ambient temperature Gültig, wenn die Anschlüsse auf Umgebungstemperatur gehalten werden http://www.diotec.com/ © Diotec Semiconductor AG