www.osram.com/prevaled PrevaLED® Flat AC – PL-FLAT-AC-G1 xx00-8y0-230V xx =15 for 1500lm, 23 for 2300lm, 25 for 2500lm; y = 3 for 3000K, 4 for 4000K Technical information Benefits − − − − − − − High performing low cost AC-driven LED-engine for diffuse wall- / ceiling-mounted luminaires Power on-board through integrated driver electronics Low height luminaires with high uniformity realizable Two Flat AC diameters for multiple luminaire diameters High system efficacy for simple thermal management Safety through thermal derating Touch protect accessory for safe installation in existing luminaires Applications For general illumination in: − Corridors, Stairways, Entrance ways − Hospitality: Hotels, Restaurants − Public, Commercial & Office buildings − Secondary rooms: garages, storage, … (picture for reference only) Technical operating data Product PL-FLAT-AC-G1 1500-830 230V PL-FLAT-AC-G1 1500-840 230V PL-FLAT-AC-G1 2300-830 230V PL-FLAT-AC-G1 2500-840 230V Product PL-FLAT-AC-G1 1500-830 230V PL-FLAT-AC-G1 1500-840 230V PL-FLAT-AC-G1 2300-830 230V PL-FLAT-AC-G1 2500-840 230V 1 Color rated Voltage [Vac] 230 Color Temp. [K] nom. lum. flux [lm] Warm white nom. Power [W] 13.6 Beam angle [°] 1500 nom. efficacy [lm/W] 110 3000 Cool white 12.5 230 4000 1500 120 112 Warm white 20.4 230 3000 2300 113 112 Cool white 20.4 230 4000 2500 123 112 min. lum flux [lm] 1350 max. lum flux [lm] 1650 max Power [W] power factor λ diameter [mm] tp [°C]1 tc [°C] 15 >0.9 170 75 85 Energy efficiency index A+ 1350 1650 13.8 >0.9 170 75 85 A+ 2070 2530 22.4 >0.9 240 75 85 A+ 2250 2750 22.4 >0.9 240 75 85 A+ 112 tp refers to the temperature at the tc-point related to the performance of the LED light engine (see IEC/PAS 62717). Note: Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. PrevaLED® Flat AC G1 Edition: 10.2015 1/3 www.osram.com/prevaled Technical features − − Rated luminous flux: typ. 1500lm, 2300lm and 2500lm Light colors: o Warm white (3000K) o Cool white (4000K) Color rendering index: typ. 83 Diameters: 170 and 240mm Operation with mains voltage: 220 – 240 Vac; 50/60Hz Modulation of 100Hz better than 40% L70B50 @ 50,000 hours at tp=75°C (see IEC/PAS 62717) L0C10 @ 50,000 hours at tp=75°C (see IEC/PAS 62717) Specialized touch safe accessory (PL-FLTP 170 and PL-FLTP 240) to cover line-voltage carrying parts and enable easy and safe installation in existing luminaires. − − − − − − − Minimum and maximum ratings Operating temperature at tc-point [°C]2 -20 … 85 Product PL- FLAT-AC-G1 xx00-8y0-230V Storage temperature [°C]2 -20 … 85 Operating Voltage range [Vac]3 220 … 240 The tc-point is at the top of the LED light engine and it is marked as “Tc”. The LED light engine is designed to work on 230Vac mains voltage. Reverse wiring on the mains voltage wiring will not impede the operation of the LED light engine. The thermal derating starts at a tc point temperature of > 90 °C. Dimensions & mechanical data “small” 170 Diameter (mm) Weight (g) 106 Mounting “large” 240 “small” “large” 176 Solid wire cross-section (mm²) 3 x M4 4 x M4 screws screws 0.5 – 1.5 (AWG 16 – 20) Stranded wire cross section (mm², no ferrule to be used) 0.5 – 1.5 (AWG 16 – 20) (dimensions rounded) (dimensions rounded) Standard Compliance CE Eye Security Ingress Protection Environment 2 3 EN 62031, EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3 EN 62471, RG1 (prior to mounting in a diffuse luminaire) Dry Location, IP 20 (with PL-FLTP applied) RoHS Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the LED light engine. The temperature of the LED light engine must be measured at the tc-point according to EN60598-1 in a thermally stable state with a temperature sensor or a temperature sensitive label. The tc-point is clearly marked at on the product. Exceeding maximum ratings for operating voltage range will lead to a change in performance and lifetime and could damage the LED light engine. Note: Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. PrevaLED® Flat AC G1 Edition: 10.2015 2/3 www.osram.com/prevaled Safety information − − − − − − − − − − − − The LED light engine itself and all its components may not be mechanically stressed. It is recommended to mount the LED light engine on a heat sink (e.g. sheet metal) providing adequate thermal dissipation. Do not damage or destroy conducting paths on the circuit board. The LED light engine is mains voltage operated. All related safety precautions need to be observed. The LED light engine cannot be operated safely when the touch protection accessory is mechanically damaged, unless the luminaire provides independent touch protection. Installation of LED light engine needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installation. Parallel connection of the LED light engines is highly recommended as safe electrical operation mode. Serial connection of the LED light engines is forbidden. These light engines are based on 100Hz technology and modulate the light amplitude at this frequency. Therefore the LE must not be applied in rooms with fast moving parts such as rotating machines, if there is a risk of frequency interference. Fast moving parts might appear to stand still although being in motion. Possible interference with camera/display systems should be checked. Damage by corrosion will not be honored as materials defect claim. It is the user's responsibility to provide suitable protection against corrosive agents, such as moisture, condensation and other harmful elements. Pay attention not to exceed the maximum operation temperature 85°C at the tc point when the modules are used in an enclosed environment. The design of the housing/luminaire should be according to the IP standards applicable for the intended application. See also the related application note (available on the OSRAM Web Pages) for further details. Ordering guide LED light engines Order No 20 pieces Quantity (pieces) PL-FLAT-AC-G1 1500-830 230V 4052899135192 PL-FLAT-AC-G1 1500-840 230V PL-FLAT-AC-G1 2300-830 230V PL-FLAT-AC-G1 2500-840 230V Product Order No 1 piece Quantity (pieces) 20 4052899157811 1 4052899135185 20 4052899157804 1 4052899135208 20 4052899157828 1 4052899135215 20 4052899157835 1 Order No 1 piece Quantity (pieces) 20 4052899157842 1 20 4052899157859 1 Order No 20 pieces Quantity (pieces) PL-FLTP 170 4052899135154 PL-FLTP 240 4052899135161 Accessory Sales and technical support OSRAM GmbH Sales and technical support is given by the local OSRAM subsidiaries. Marcel-Breuer-Straße 6 80807 Munich, Germany www.osram.com +49.89.6213-0 (Headquarter) +49.89.6213-6000 (Customer-Service-Center) On the OSRAM website all subsidiaries are listed with complete address and phone numbers. Links and related further information OSRAM LED Systems OSRAM catalogue General information Note: www.osram.com/prevaled catalog.osram.com www.osram.com Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. PrevaLED® Flat AC G1 Edition: 10.2015 3/3