Automotive ICs Battery Management, Linear Regulators, Battery Chargers, Switching Regulators, Multiphase Controllers, Bridge Drivers, LCD Display Controllers, Video Decoders Product Highlights January – June 2016 FREE SAMPLES ASK YOUR SALES REP OR DISTRIBUTORS FOR FREE SAMPLES Contents Contents Battery Management........................................................ 8 Linear Regulators.............................................................11 Switching Regulators......................................................12 Bridge Drivers...................................................................15 Multiphase Controllers...................................................16 LCD Display Controllers.................................................20 Video Decoders................................................................22 Other Display Power & Support Products���������������24 Design Tools and Support.............................................26 4 \ Automotive ICs About Intersil Automotive ICs Intersil has invested in key technologies to address the trends within the automotive market such as environment, safety, information and affordability. This effort has resulted in leadership positions in high performance power conversions, state-of-the-art precision analog, cell balancing and battery charging ICs, power-efficient class D audio amplifiers, and highly flexible TFT display controllers. Intersil offers both standard and AEC-Q100 qualified products for automotive applications. For complete product list, visit Automotive ICs page on www.intersil.com FOUR WAYS INTERSIL MAKES CARS SMARTER • SAFETY: See behind your car within 500 milliseconds with TW88xx Display Processors. • EFFICIENCY: Improve power efficiency by 5% with highly efficient Synchronous Regulators. • CONNECTIVITY: Get end-to-end, bi-directional communication with enhanced SerDes video links. • AFFORDABILITY: Eliminate costly CAN transceivers with proprietary cell-balancing diagnostic communications system. Automotive ICs / 5 Why Intersil? Offer AEC-Q100 Qualified Products AEC-Q100 is an industry standard specification that outlines the recommended new product and major change qualification requirements and procedures for packaged integrated circuits. Intersil offers both standard and AEC-Q100 qualified products for automotive applications. Not all Intersil products are designed nor intended for use in automotive applications. Products that are qualified for and meet AEC-Q100 requirements are clearly designated in their datasheet. Dedicated Customer Support • Dedicated automotive product line and field support teams • Automotive part qualification to AEC-Q/customer specific requirements Please visit the Quality and Reliability section of our website to view certification documentation. AEC-Q100 Qualified • TS16949 certified manufacturing sites • Achieve 100% first time submission for approval of PPAP • Intersil unique Ordering Part Number (OPN) • Comprehensive in house device failure analysis capabilities with standard 8D reporting format • Extensive quality systems • Rigorous process change notice and change management support • Timely specification review for technical, environmental (IMDS), and general quality requirements Assured Product Supply Long life cycles ensure a steady flow of product, which gives your design longevity. Intersil still supports products that have been in production for more than 40 years. For complete product list, visit Automotive ICs page on www.intersil.com 6 \ Automotive ICs Automotive Power Products For complete product list, visit Automotive ICs page on www.intersil.com Automotive ICs / 7 - + High Input Voltage Medium Input Voltage VIN: 3 - 28V VOUT: 0.6V - 24V VIN: 3 - 60V VOUT: 1.2V - 24V Low Input Voltage VIN: 2-7V VOUT: 0.6V – 5V • Load dump protection • Multi-output • Tiny footprint • Double battery protection • High integration • Accurate • Low EMC • Low noise • Cold crank operation • High efficiency • High efficiency Power Rails Intersil’s Automotive Power Management ICs • Low quiescent current Intersil’s automotive grade power management ICs are: • AEC-Q100 qualified • Manufactured in TS16949 certified facilities • Different temperature grades (85°C, 105°C, 125°C, etc.) • Offered in automotive packages (including exposed leads or WFQFN where AVI required) For complete product list, visit Automotive ICs page on www.intersil.com Battery Management 8 \ Automotive ICs Multi-Cell Balancing Hybrid Electric, Plug-in Hybrid Electric and Electric Vehicle (HEV/PHEV/EV) Battery Management Solutions ISL78600 specifically designed to meet the stringent safety, reliability and performance requirements of next generation Hybrid Electric Vehicle (HEV), Plug-in Hybrid Electric Vehicle (PHEV) and Electric Cell management battery management and safety monitoring chipset solution is ISL78610 DHi2 DHi2 DLo2 DLo2 DHi1 DHi1 DLo1 DLo1 Cell Monitoring Intersil’s ISL78600 and ISL78610 automotive grade Li-Ion Vehicle (EV) applications. The automotive grade (AEC-Q100), ISL78600 12-cell battery pack manager can be used as a standalone part in ASIL compliant systems, deployed in conjunction with the complimentary ISL78610 for higher ASIL ratings or in systems requiring an independent open wire, over and under voltage as well as temperature and cell balancing faults to mitigate battery pack failures. Cell management of their major internal functions and detect external faults such as The highly integrated functionality of the ISL78600 and ISL78610 ISL78610 DHi2 DHi2 DLo2 DLo2 SCLK DOUT DIN CSbar Data Rdy EN Fault SCLK DOUT DIN CSbar Data Rdy EN Fault offers a number of benefits and can significantly reduce the overall battery management costs of HEV/PHEV/EV battery packs and their associated systems. Daisy Chain Serial Communication Lines — up to 14 Packs Host Micro Isolated Comms • Differential communications system provides high noise immunity • Uses low cost twisted pair wiring for pack stacking (up to 1m) • High immunity to system transient and EMI events For complete product list, visit Automotive ICs page on www.intersil.com To System Controller Cell Monitoring ISL78600 backup solution. The devices provide built-in fault detection for all Automotive ICs / 9 ISL78600 12 Cell Li-ion Battery Pack Manager Ideal for Hybrid and Electric Vehicle The ISL78600 Li-ion battery manager IC supervises up to 12 ISL78600 PACK+ VBAT cell balancing and extensive system diagnostics functions. Control logic and Communications series connected cells. The part provides accurate monitoring, VC12 CB12 • Cell voltage measurement accuracy ±1.5mV VC11 CB11 • VBAT measurement accuracy ±100mV VC10 • Cell voltage scan rate of 20μs per cell CB10 • Proprietary Daisy Chain communications system CB9 VC7 – Excellent system transient resistance CB7 VC6 • Passive balancing CB6 • Integrated system diagnostic functions: CB5 VC5 VC4 – Cell over and under-voltage CB4 – Over temperature CB3 – Open cell monitoring wires – VBAT and VSS connection integrity VC0 V3P3 VDD EXT VSS V2P5 VCC VREF Temp MUX 2nd Ref IC Temp VC1 CB1 SPI V2P5 CB2 – Open temperature monitoring wires SPI Comms Base VC3 VC2 Daisy Chain VREG VC MUX CB8 MUX VC8 – Robust EMI performance Input buffer/level shift and fault detection VC9 Isolated Comms REF ADC Fault Detection TEMPREG ExT1 ExT2 ExT3 ExT4 PACK- – Voltage reference function Cell Balancing Device Cell Accuracy Connected Li-Ion Cells (max) Daisy Chain # of Devices VBAT Measurement Accuracy Integrated System Diagnostic Functions Package Type Temp Range Technical Highlights ISL78600 ±1.5mV 12 14 ±100mV Yes 64 Ld TQFP -40 to 105°C Li-ion battery pack manager ISL78610 ±10mV 12 14 ±100mV Yes 64 Ld TQFP -40 to 105°C Li-ion battery pack monitor For complete product list, visit Automotive ICs page on www.intersil.com Battery Management 10 \ Automotive ICs Battery Chargers ISL78692 Battery Charger Extends Life of eCall Systems EEPW Innovation Award Winner New highly integrated ISL78692 Li-ion battery charger safeguards backup battery in automotive eCall systems. • Complete charger for single-cell Lithium batteries PROVIDES A COMPLETE CHARGING SOLUTION • 3µA leakage (max) over -40°C to 85°C temperature range • 4.1V charging voltage extends the life of LiFePO4 batteries • Up to 1A programmable charging current With guaranteed < 3.0µA reverse battery leakage • 1% initial voltage accuracy • 10% trickle charge preconditions fully drained battery until it reaches 2.8V minimum charge level • AEC-Q100 grade 3 qualified • 10-pin, 3mm x 3mm DFN package Programmable Constant Current Charging Tight Battery Voltage Charging Accuracy ±0.1% Typical 500 450 400 4.15 350 Battery Voltage(V) • Capable of operating down to 2.65V (cold crank case) Battery Charging Current (mA) Trickle Charge Preconditioning for Depleted Cells 300 250 200 150 100 50 0 2.6 2.9 3.2 3.5 3.8 4.1 4.4 4.13 4.09 Device VIN Range ISL78692 4.3 to 5.5V 4.1V 85C 25C 4.07 4.05 4.0 4.5 5.0 5.5 6.0 Input Voltage (V) Battery Voltage (V) Typical Charging Curve VBAT (typ) -40C 4.11 Typical Charge Voltage VBAT Leakage Current (max) ICHARGE (max) Safety Timer Self Termination Accepts CC Adapter Package Type Temp Range 3µA 1A Yes Yes Yes 10 Ld DFN -40 to 85°C For complete product list, visit Automotive Battery Management Solutions page on www.intersil.com 6.5 Automotive ICs / 11 Linear Regulators Linear Regulators ISL78301/ISL78307 40V, Low Quiescent Current Linear Regulator Ideal for “always-on” and “keep alive” Automotive Applications LOW IQ OVER FULL OPERATING RANGE 100 Quiescent Current (uA) 90 • Withstands 45V load dump • Operates down to 3V during cold cranking • Low 300mV dropout voltage 80 125°C 25°C 70 60 -40°C 50 40 30 20 10 • 50mA (ISL78307) or 150mA (ISL78301) output 0 0 10 VIN 20 30 50 Device # of Outputs VIN Range (V) VOUT Range (V) IOUT1 (max) IQ (typ) Noise (μVRMS 10Hz to 100kHz) ISL78301 1 6 to 40 2.5 to 12 150mA 18µA - 66 14 Ld TSSOP -40 to 125 Off-battery linear regulator ISL78307 1 6 to 40 2.5 to 12 50mA 18µA - 58 8 Ld SOIC -40 to 125 Off-battery linear regulator ISL78302 2 2.3 to 6.5 1.2 to 3.3 300mA 47µA 37 64 10 Ld DFN -40 to 105 Low noise, low IQ PSRR (dB) Package Type Temp Range (°C) Technical Highlights 40V ≤6.5V 40 Load Current (mA) • Thermally enhanced 8 Ld SOIC (ISL78307) and 14 Ld HTSSOP (ISL78301) packages ISL78302A 2 2.3 to 6.5 1.2 to 3.3 300mA 47µA 30 90 10 Ld DFN -40 to 105 Low noise, very high PSRR and low IQ ISL78310 1 2.2 to 6 0.8 to 5 1A 3mA 63 72 10 Ld DFN -40 to 125 130mV dropout voltage typical (at 1A) For complete product list, visit Automotive ICs page on www.intersil.com Switching Regulators 12 \ Automotive ICs High Voltage Buck Controllers ISL78268 55V Buck Controller Provides High Step-Down Efficiency For Automotive Applications The ISL78268 buck controller provides very high stepdown efficiency for a wide variety of load currents from under 5 to over 25A, enabling it to support virtually every 12, 24, or 48V high current buck requirement for automotive and industrial applications. EVALUATION BOARD DESIGN MODEL VIN • Wide operating input voltage range of 5V to 55V (up to 60V when not switching) • Adjustable switching frequency from 50kHz to 1.1MHz • Supports 5-25A loads and can be used in a two-phase, current sharing configuration to support loads up to 50A • Constant current regulation / limiting (dedicated average control loop) VIN E N_IC EN PVCC VCC IS E N1P ISEN1N ISL78268 • Selectable diode emulation and burst mode for light loads BOOT FSYNC UG PLL_COMP PH VOUT LG SLOPE • Adaptive dead-time control PVCC PVCC IMON/DE ISEN2P ISEN2N COMP SS FB VCC CLKOUT HIC/LATCH SGND PGND PGOOD POWER GOOD • Low shutdown current of 3µA • 24 Ld 4x4 QFN For complete product list, visit Automotive ICs page on www.intersil.com Typical Application Diagram Automotive ICs / 13 Low Voltage Buck Regulators ISL78233/34/35 AEC-Q100 DC/DC Converters Allow Migration from 3A to 5A Without PCB Change Intersil’s ISL78233/34/35 automotive DC/DC converters step-down 5V rails to POL for GPUs, FPGAs, DSPs and SOCs. The highly efficient devices deliver 3A, 4A and 5A of continuous output current to infotainment head units and Advanced Driver Assistance Systems (ADAS) employing forward-looking smart cameras to detect and classify objects. EVALUATION BOARD ISIM EVALUATION BOARD The pin-compatible ISL78233/34/35 ICs allow you to make a simple BOM change and drop in the right device to your PCB to address the varying load requirements of entry-level to luxury car models. • 2.7V to 5.5V input voltage range; up to 95% efficiency • 2MHz default switching frequency; adjustable from 500kHz to 4MHz • 100ns guaranteed phase minimum on time for wide output regulation • AEC-Q100 qualified for operation from -40°C to +125°C • Wettable flank QFN package allows optical inspection of solder joints for lower manufacturing cost (see page 17 for more detail) 5mm x 5mm WFQFN Versions • ISL78233EVAL2Z • ISL78234EVAL2Z • ISL78235EVAL2Z 3mm x 3mm TQFN Versions • ISL78233EVAL1Z • ISL78234EVAL1Z • ISL78235EVAL1Z For complete product list, visit Automotive ICs page on www.intersil.com Switching Regulators 14 \ Automotive ICs Integrated FET Regulators VIN Range (V) VOUT Range (V) IOUT (max) (A) IQ Package Type Temp Range (°C) Topology VIN Device # of Outputs Buck or Boost 40V ISL78201 1 3 to 40 0.8 to 38 2.5 0.3mA 20 Ld TSSOP -40 to 105 Off-battery switching regulators 40V ISL78206 1 3 to 40 0.8 to 38 2.5 1.3mA 20 Ld TSSOP -40 to 105 Off-battery switching regulators 18V-28V ISL78208 2 4.5 to 28 0.8 to 26 3 1.2mA 32 Ld WFQFN -40 to 105 Wide VIN, 3A/3A continuous output current, WFQFN package ISL78236 2 2.85 to 6 1.2 to 6 6 30µA 24 Ld QFN -40 to 105 Current sharing -40 to 125 Compact, WFQFN package ISL78233 1 2.7 to 5.5 0.6 to 5.5 3 45µA 16 Ld TQFN, 16 Ld WFQFN ISL78234 1 2.7 to 5.5 0.6 to 5.5 4 45µA 16 Ld TQFN, 16 Ld WFQFN -40 to 125 Compact, WFQFN package ISL78235 1 2.7 to 5.5 0.6 to 5.5 5 47µA 16 Ld TQFN, 16 Ld WFQFN -40 to 105 Compact, WFQFN package ISL78213 1 2.8 to 5.5 0.8 to 5.5 3 35µA 16 Ld QFN -40 to 105 Low IQ, high efficiency ISL78214 1 2.8 to 5.5 0.8 to 5.5 4 35µA 16 Ld QFN -40 to 105 Low IQ, high efficiency ISL78228 2 2.75 to 5.5 0.6 to 5.5 0.8 30µA 10 Ld DFN -40 to 105 Low IQ, high efficiency ISL78322 2 2.8 to 5.5 0.6 to 5.5 2 40µA 12 Ld DFN -40 to 105 Low IQ, high efficiency ISL78113A 1 0.8 to 4.7 1 to 5.2 0.5 1µA 8 Ld DFN -40 to 105 High efficiency, with 1.3A switch Buck ≤6V Boost 4.7V Technical Highlights Single Output Buck Controllers 55V ISL78268 1 5 to 55 1.6 to 55 25 - 24 Ld QFN -40 to 125 With integrated 3A driver ≤25V ISL78210 1 3.3 to 25 0.5 to 3.3 30 - 16 Ld µTQFN -40 to 105 Embedded processor PWM controller Buck For complete product list, visit Automotive ICs page on www.intersil.com Automotive ICs / 15 Bridge Drivers Bridge Drivers ISL78420 100V, 2A Peak, High Frequency Half-Bridge Driver with Adjustable Dead Time • Tri-Level PWM input for single input switch control – Ideal in phase shedding multi-phase power supplies – Ideal companion product to ISL78220/225 ISL78420EVAL1Z • Bootstrap supply max voltage to 114 VDC • Break-before-make dead-time prevents shoot-through – Adjustable up to 250ns VDD HB PWM • Wide supply voltage range (8V to 14V) PWM CONTROLLER • 1.6Ω/1Ω typical output pull-up/pull-down resistance HO EN VSS Device VDD Max Bootstrap Supply Voltage ISL78420 8V to 14V 114V SECONDARY CIRCUITS HS RDT • 14 Ld HTSSOP package compliant with 100V conductor spacing guidelines per IPC-2221 100V MAX ISL78420 HALF BRIDGE LO EPAD FEEDBACK WITH ISOLATION VBIAS (max) Peak Pull-up Current Peak Pull-down Current Package Type Temp Range Technical Highlights 14V 2A 2A 14 Ld HTSSOP -40 to 125°C With Tri-Level PWM input and adjustable dead-time For complete product list, visit Automotive ICs page on www.intersil.com Multiphase Controllers 16 \ Automotive ICs Multiphase Synchronous Controllers ISL78227/ISL78229 55V 2-Phase Synchronous Boost Controllers with Integrated Drivers and PMBus Interface The ISL78227 and ISL78229 are the industry’s most robust and highly integrated boost controllers available to simplify the design of high power automotive applications. Operating from a 12V battery supply, these devices boost the output voltage to 24V, 36V or 48V for premium 200W to 800W trunk audio amplifiers, start-stop systems, and headlamp LED strings. EVALUATION BOARD DESIGN MODEL •Operation from 5 to 55V •PMBus interface (ISL78229 only) VIN VIN EN_IC EN NTC •Synchronous operation for highest efficiency (>90%) •Compact solution, with integrated drivers significantlylowers PSU BOM costs PMBus SDA SCL SALERT POWER-GOOD PGOOD TRACK For complete product list, visit Automotive ICs page on www.intersil.com UG1 PH1 RSEN1 ISEN1N ISEN1P BOOT2 UG2 PH2 CLOCK_OUT •32 Ld 5x5 WFQFN (ISL78227), 40 Ld 6x6 WFQFN (ISL78229) VOUT BOOT1 LG1 •Cascade-able for increased output power (90° phase) •Track input allows dynamic output voltage modulation supports audio envelope tracking for improved amplifier efficiency & performance (class A/B & D) PVCC ISL78229 CLKOUT SS COMP LG2 ISEN2N ISEN2P FB PMBus Interface offers advanced control, telemetry, and diagnostics RSEN2 VIN Automotive ICs / 17 Multiphase Controllers Product Highlights Topology VIN Device Max # of Outputs Max # of Phases VIN Range (V) VOUT (min) (V) IOUT (max) (A) VBIAS (V) ISL78220 1 6 5.6 to 40 5.6 180 4.75 to 5.25 44 Ld TQFP -40 to 125 With light load efficiency enhancement ISL78225 1 4 5.6 to 40 5.6 120 4.75 to 5.25 44 Ld TQFP -40 to 125 With light load efficiency enhancement ISL78227 1 2 5 to 55 5 55 4.75 to 5.5 32 Ld WFQFN -40 to 125 With integrated drivers ISL78229 1 2 5 to 55 5 55 4.75 to 5.5 40 Ld WFQFN -40 to 125 With drivers and I2C/PMBus™ Package Type Temp Range (°C) 40V Boost 55V Device Description Benefits of Wettable Flank QFN (WFQFN) Package Intersil offers many of its automotive products in WFQFN packages. These WFQFN packages offer a dimpled lead frame that allows solder fillets to form at each lead, allowing for low-cost optical inspection of the solder joints. For complete product list, visit Automotive ICs page on www.intersil.com 18 \ Automotive ICs Automotive Infotainment and Display Products For complete product list, visit Automotive ICs page on www.intersil.com Automotive ICs / 19 Advanced Display Controllers Intersil’s TW88xx automotive The TW88xx product line is designed infotainment display IC product line for OEM Automotive applications and is defined by feature rich, highly therefore support -40˚C to +85˚C integrated semiconductor solutions or +105˚C. All products listed in this that incorporate many key function section are AEC-Q100 qualified. blocks for front console, rear seat entertainment, and rear camera display applications. The product family includes an analog video decoder, high quality H/V scaler, Samples and evaluation boards are available upon request. Please contact your local sales office for support. 2D de-interlacer, and embedded timing controllers. In addition, certain TW88xx products include advanced technologies such as a 3D adaptive comb filter, 3D noise reduction, an embedded MCU, a touchscreen controller, bit-map OSD, graphic overlay with alpha blending, PIP/ POP, dual view display support, and a LVDS panel interface to directly drive high resolution OpenLDI (LVDS) LCD panels. For complete product list, visit Automotive ICs page on www.intersil.com LCD Display Controllers 20 \ Automotive ICs LCD Display Controllers TW8836 Ultra-Reliable and Latency Free LCD Controller Offers Industry-Leading Boot Time Intersil’s AEC-Q100 grade 2 qualified TW8836 LCD controller incorporates many of the features required to create a multipurpose LCD display system into a single-chip, hardware-based solution. Designed for ultimate flexibility and quality, the TW8836 can be used to display rear camera video with graphic overlay in less than 500 milliseconds from the start of a vehicle, exceeding government safety regulations* and improving vehicle safety. GPLL Y CIN0 ~ 1 C VIN0 ~ 1 V Diagnostic LVDS • Versatile – can take in virtually any type of video source and can be used in conjunction with the most popular SoCs in the market For complete product list, visit Automotive ICs page on www.intersil.com SSPLL2 LVR DVDD R-C OSC Serial RGB TCON Measurement LVDS-RX SSPLL1 • Flexible – special BT.656 output path allows the chip to drive the panel directly and show rear camera video while the SoC is booting up TTL 24bit SPI OSD LVDS TX PCLK MCUCLK Host Interface OSC I2C MCU SPI Interface GPIO Interrupt SPI Flash Touch Screen Controller TW8836 Functional Block Diagram TCON I/F LVDS X+/-, Y+/AUX0 ~ 3 Sharing Pins DTV I/F Dither Gamma DTV CSC VSYNC Font OSD Timing Gen. LLCLK Image Enhancer LLPLL Scaler 2D-DI HSYNC SOY Slicer IN MUX SOY0 ~ 1 BT.656 BT.656 Encoder Down Scaler 2D-Comb Decoder • Hardware-based – more reliable fast-boot capability and a more stable video path than software-based solutions CVBS S-Video Component ARGB TW8836 YIN0 ~ 3 10-bit ADC • No external memory required – ultra-responsive and latency free video YOUT MUX • Highly integrated – built-in decoder, triple ADCs, LVDS and TTL inputs, MCU, On Screen Display, TCON and LVDS panel interface Automotive ICs / 21 Display Processors Input Types Analog RGB / YPbPr Digital RGB / YCbCr LVDS ADC Input Max Output BT.656 Package (OpenLDI) Frequency Resolution Output Type Temp Range (°C) Technical Highlights Yes (1CH) 148MHz Device CVBS S-Video TW8836 Yes* Yes Yes (1080p) Yes (24-bit) TW8835 Yes Yes Yes (1080p) Yes (24-bit) No No Yes (24-bit) Yes (1CH) No WXGA (1366x768) Yes 128 LQFP -40 to 105 With LVDS I/O 148MHz XGA Yes 128 LQFP -40 to 85 With BT656 Output 27MHz WXGA (1366x768) Yes 100 TQFP -40 to 105 With LVDS I/O 27MHz WQVGA No 48 QFN -40 to 85 Analog TFT LCD Controller TW8834 Yes* Yes TW8833S Yes Yes No No Yes (720p) Yes (8-bit) No 60MHz SVGA No 80 LQFP -40 to 85 Low Cost, With SPI Bitmap OSD Low Cost TW8832S Yes Yes TW8831 Yes Yes No No No 27MHz SVGA No 80 LQFP -40 to 85 Yes Yes (720p) Yes (8-bit) No 60MHz SVGA No 80 LQFP -40 to 85 Low Cost No 27MHz WQVGA No 80 TQFP -40 to 85 Low Cost Analog TFT LCD Controller TW8830 Yes TW8827 Yes Yes No Yes (16-bit) TW8826 Yes Yes Yes (720p) Yes (24-bit) No 75MHz WQVGA No 128 LQFP -40 to 85 Analog TFT LCD Controller TW8824 Yes* Yes No Yes (24-bit) No 27MHz WXGA (1366x768) Yes 100 TQFP -40 to 105 With LVDS Panel Support TW8823C Yes Yes Yes (720p) Yes (24-bit) Yes (1CH) 80MHz WXGA (1366x768) No 216 LQFP -40 to 105 With 3D Video Decoder, PIP, and 16-bit Bitmap OSD TW8820 Yes Yes No No No 27MHz SVGA No 64 LQFP -40 to 85 Low Cost LCD Controller with MCU TW8819 Yes* Yes No No No 27MHz WVGA No 48 WQFN -40 to 105 Low Cost, With Differential CVBS Input Support TW8817 Yes Yes No No No 27MHz SVGA No 80 TQFP -40 to 85 LCD Controller with MCU TW8816B3 Yes Yes Yes (720p) Yes (24-bit) No 75MHz XGA No 128 LQFP -40 to 85 With Digital & Analog Panel Output TW8813B Yes Yes Yes (720p) Yes (24-bit) Yes (1CH) 80MHz XGA No 208 LQFP -40 to 85 With PIP and LVDS Panel Support TW8811 Yes Yes Yes (720p) Yes (24-bit) No 80MHz XGA No 208 LQFP -40 to 85 With PIP and 16-bit Bitmap OSD TW8810 Yes Yes Yes (720p) Yes (24-bit) No 80MHz XGA No 208 LQFP -40 to 85 For Dual View LCD Panels TW8809 Yes* Yes No Yes (24-bit) No 27MHz WVGA Yes 56 WQFN -40 to 105 Digital RGB to BT656 Format Converter TW8807 Yes Yes No No No 27MHz WQVGA No 64 LQFP -40 to 85 Analog TFT LCD Controller TW8806 Yes Yes Yes (480p) Yes (24-bit) No 54MHz WXGA (1280x768) No 128 PQFP -40 to 85 For Digital Panels TW8804 Yes Yes Yes (480i) Yes (24-bit) No 27MHz XGA No 160 LQFP -40 to 85 With Analog RGB Mixing *Differential For complete product list, visit Automotive ICs page on www.intersil.com Video Decoders 22 \ Automotive ICs Video Decoders TW9984 4-Channel Video Decoder Provides Generate Stunning 360-Degree Surround Images for Advanced Driver Assistance Systems Intersil’s highly integrated TW9984 4-channel analog video decoder/encoder for around-view parking assist applications provides improved safety for drivers and pedestrians. The TW9984 is based on Intersil’s market leading video decoder technology and replaces up to nine discrete components with a single chip. • Four NTSC/PAL analog video decoders and 10-bit ADCs with differential, pseudo differential and single-ended inputs • One analog video encoder to re-encode video to CVBS format CVBS0 CVBS1 CVBS2 • Programmable automotive short diagnostics—short-to-battery and short-to-ground detection—on each differential input channel CVBS3 + _ + _ + _ + _ 4H-Comb Decoder Image Enhancer 4H-Comb Decoder Image Enhancer 4H-Comb Decoder Image Enhancer 4H-Comb Decoder Image Enhancer • 68 Ld WQFN package For complete product list, visit Automotive ICs page on www.intersil.com BT.656 Output BT.656 Formatter 4CH @ 108MHz x 1 bus PLL STB/STG Detection • Supports 108MHz time multiplexed ITU-R BT.656 format to output four channels over a single 8-bit data bus TW9984 BT.656 BT.656 Input Analog Video Encoder DAC IRQ CVBS output Automotive ICs / 23 TW9992 Video Decoder with MIPI-CSI2 Output Interface Supports Next-Generation SoCs The TW9992 is an analog video decoder which features an integrated MIPI-CSI2 output interface that provides compatibility with the newest SoC processors. The decoder’s MIPI-CSI2 interface simplifies design by making it easier to interface with SoCs, while also lowering the system’s EMI profile. The TW9992 decoder takes both single-ended and differential composite video inputs from a vehicle’s backup safety camera, and is the latest addition to Intersil’s video decoder product family for automotive applications. • Software selectable analog input control allows for combinations of single-ended or differential CVBS • Advanced image enhancement features: automatic contrast adjustment, and programmable hue, brightness, saturation, contrast and sharpness • Output voltage: 1.8V to 3.3V with 3.3V tolerance Device # of Channels/ Device # of Inputs Differential CVBS Input Video DAC Comb Filter Interface Type Package Type Temp Range (°C) TW9984 4 8 Yes Yes 4H BT.656 68 Ld WQFN -40 to 105 Differential CVBS Input Support with Built-in Short Diagnostics TW9966 4 8 No Yes 4H BT.656, BT601 128 Ld LQFP -40 to 105 Analog Video Decoders/Encoder TW9990 1 4 Yes No 4H BT.656, BT601 32 Ld WQFN -40 to 105 Low Power NTSC/PAL/SECAM Video Decoder with Differential CVBS Inputs TW9992 1 8 Yes No 4H MIPI-CSI2 32 Ld WQFN -40 to 105 Low Power NTSC/PAL Video Decoder with Differential CVBS Inputs and MIPI-CSI2 Output Interface TW9900 1 2 No No 4H BT.656 32 Ld QFN, TQFP -40 to 85 Low Power NTSC/PAL/SECAM Video Decoder with VBI Slicer Technical Highlights For complete product list, visit Automotive ICs page on www.intersil.com Other Display Power & Support Products 24 \ Automotive ICs TFT LCD Power Supply VBOOST Range (V) Boost Current Limit (A) VON Range VOFF Range (V) (V) Package Type Temp Range (°C) Technical Highlights 2.99 to 18 3 15 to 36 32 Ld TQFP -40 to 105 Type Device VIN Range (V) TFT-LCD Power Supply ISL78022 2.6 to 5.5 ISL78010 3 to 5.5 5.5 to 20 2 15 to 36 -20 to -5 32 Ld TQFP -40 to 105 PMIC ISL78419 2.5 to 5.5 - 1.5 - - 28 Ld QFN -40 to 105 -25 to -5 With Integrated Amplifiers TFT-LCD Power Supply Regulator SERDES Type VS (V) Device IS (mA) Clock Rate (MHz) Format Transceiver ISL76322 3.3 40 50 16-Bit Data + 3-Bit Control Transceiver ISL76321 3.3 40 50 16-Bit Data + 3-Bit Control Diff Input Impedance (Ω) Interface Type Package Type Temp Range (°C) 100 I2C 48 Ld QFN -40 to 105 100 I2C 48 Ld QFN -40 to 105 Technical Highlights With Bi-directional SideChannel Switches/MUXs/Crosspoints Type Device # of Devices/ Channels Switch ISL76123 1 2.7 to 12 1 23 10 6 Ld SOT -40 to 105 SPDT Analog Switch Mux ISL76120 1 2.7 to 5.5 0.02 25 70 10 Ld DFN -40 to 105 High Speed (480Mbps) and Full Speed (12Mbps) Signaling Capability per USB 2.0 VCC Range (V) IS (µA) RDS(ON) (Ω) Leakage (nA) Temp Package Type Range (°C) Technical Highlights LED Backlight Drivers Device # of Devices/ Channels VIN Range (V) VOUT (max) (V) Total Current for DC/DC Lighting (mA) Output Current Max/ Channel (mA) Brightness Control Interface Type Package Type Temp Range (°C) Technical Highlights ISL78100 1 2.7 to16 32 1000 1000 DC or PWM - 20 Ld QFN -40 to 105 High Power ISL78171 6 4.5 to 26.5 45 300 50 DC or PWM SMBus/I2C 20 Ld QFN -40 to 105 With PWM Dimming For complete product list, visit Automotive ICs page on www.intersil.com Automotive ICs / 25 ISL78365 Laser Diode Driver for Automotive Head-Up Displays Intersil’s highly integrated ISL78365 laser diode driver pulses four high intensity lasers up to 750mA for projecting full-HD color video onto the windshield. The device’s higher current and faster switching speed enables head-up displays (HUDs) with high resolution, high color-depth and high frame-rate projections. The quad-channel ISL78365 is a complete solution for driving lasers in the scanned-MEMS laser projection systems being deployed in LASER SCAN MEMS PROJECTION Laser Scan MEMS Projection System SYSTEM next generation autos. • Up to 750mA of peak current output per channel (nearly 2x higher than competing solutions) 476M5 PH • Fast output switching speeds with pulse rise/fall times of 1.5ns typical for crisp pixels • Laser voltage sampler with integrated dynamic power optimization controller to conserve system power MEMS Scanning Mirror ISL78365 Laser Diode Driver RGB Lasers L7 IS 65 83 • Flexible data order supports multiple RGB laser diode optomechanical placement Laser Diode Driver Device ISL78365 Supply Voltage Range 3V to 3.6V Rise/Fall Time 1.5 ns Frequency Max 150 MHz Internal Oscillator Yes Output Current 750 mA Qualification Level Automotive Package Type 40 Ld WQFN Temp Range (°C) -40 to 125 Applications RGB scanning laser projection system, Laser based projectors, Generic laser based applications requiring multiple independently controlled lasers or a single high current driver For complete product list, visit Automotive ICs page on www.intersil.com Design Tools and Support Design Tools and Support REFERENCE AND EVALUATION PLATFORMS Browse our library of reference designs, evaluation boards, and demo boards. ISIM DESIGN TOOL DESIGN MODELS Download IBIS, SPICE, macro, Saber and text file design models. VIDEO CENTER Intersil’s iSim interactive web-based design Watch the latest videos and tool helps you select and simulate power tutorials at Intersil’s Video Center. and precision analog devices. SUPPORT PORTAL APPLICATION BLOCK DIAGRAMS Get answers from an Intersil application Browse the latest application block support professional within one diagrams and selection tables. business day. PRODUCT CHANGE NOTIFICATION Subscribe to receive product change notifications for the devices you are using in your design. QUICK FACTS Founded 1999 Headquarters San Jose, CA President, CEO Necip Sayiner Employees 1,100 NASDAQ Listing ISIL Market Cap $2 billion FY 2015 Sales $522 million U.S. Patents 1,000+ MAIN OFFICES North America - West Coast 1001 Murphy Ranch Road Milpitas, CA 95035 TEL:1-888-INTERSIL (468-3774) North America - East Coast 1650 Robert J. Conlan Blvd NE Palm Bay, FL 32905 TEL: 321-724-7000 FAX: 321-729-7320 Europe Oskar-Messter-Str. 29 D-85737 Ismaning, Germany TEL: +49-89-46263-0 China Suite 701, Han Tang Building Overseas Chinese Town Shenzhen 518053, P.R. China TEL: +86-755-8246-5118 Japan 6F, Mita Nitto Daibiru 3-11-36, Mita, Minato-ku Tokyo, 108-0073, Japan TEL: +81-3-5439-2311 www.intersil.com LC-057.11 © 2016 Intersil Americas LLC. All Rights Reserved. Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries. All other trademarks mentioned are the property of their respective owners.