Dual Antenna Panel 125kHz+13.56MHz TWN4 Core Module Description Dimensions Frequency Antenna Inductance Impedance Connectors Picture TWN4 Dual Antenna Panel L x W x H: 56 x 46 x 6mm 125kHz, 134.2kHz (LF) PCB 490µH±5% n.a. Pads Bottom View 13.56MHz (HF) Aircoil n.a. 50 Ohm SMA SMB, SMC, MCX or UMCC/U.FL Top View Signals TWN4 Dual Antenna Panel Order Code Options TWN4 Core Module ART15185 The placement of a connector (pitch 2mm) is possible. Dimensions are approximate values only - more detailed datasheets are available on request. Elatec reserves the right to change any information or data in this document without prior notice. The distribution and the update of this document is not controlled. Elatec declines all responsibility for the use of product with any other specifications but the ones mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification © 2013 Elatec GmbH – DocRev1 – 08/2013 Elatec GmbH Lilienthalstr. 3 82178 Puchheim Germany Phone: Fax: +49 89 5529961 0 +49 89 5529961 29 [email protected] www.elatec-rfid.com