TWN3 Mifare® NFC 13.56MHz Contactless Reader/Writer The TWN3 Mifare NFC transponder reader is designed for easy integration into various applications. The device supports either USB or RS232 communication just in dependence on the connection cable and is available as ready-to-connect desktop reader in a slim line black or white housing or as a OEM board (PCB) without housing for direct integration into embedded applications. Readers can be programmed with a script language for autonomous execution of even complex commands like login procedures, increment/decrement functions and many more. The Secure Access Module (SAM) is supported for enhanced security and cryptographic performance. This enables the application to perform secure transactions, e.g. payment terminals etc. Additional features for OEM PCB version o 5 V serial TTL interface o 2 General Purpose Outputs Elatec GmbH Lilienthalstr. 3 82178 Puchheim Germany Phone: Fax: +49 89 5529961 0 +49 89 5529961 29 [email protected] www.elatec-rfid.com Technical Data Housing Frequency Dimensions Power Supply Supply Current Temperature Range Antenna R/W Distance Host Interfaces OS Support Communication Parameters Modes of Operation Special Features Supported Transponders Certifications Weight Order Code OEM board Desktop reader USB black USB white Serial black Serial white 1) UID only 2) Material ABS UL94-V0, colour black or white 13.56 MHz Desktop Reader: 88mm x 56mm x 18mm / 3.5inch x 2.2inch x 0.7inch OEM Board: 76mm x 49mm x 14mm / 3.0inch x 1.9inch x 0.6inch 5V ± 10% via communication cable (USB); serial version requires external power supply 65mA typ. (USB, normal operation); 120mA peak Storage: -45°C up to +85°C (-49°F up to 185°F) Operating: -25°C up to +80°C (-13°F up to 176°F) PCB Aircoil up to 100 mm / 4 inch (depending on transponder) USB, RS232. The OEM board supports both and an additional serial TTL interface via a separate connector Windows XP, Windows Vista, Windows 7 (32/64 bit) and Linux USB: Full speed (12 MBit) RS232: Baudrate: 1200, 2400, 4800, 9600, 19200, 38400, 57600 Parity: none, even, odd USB keyboard emulation USB virtual COM port (bi-directional communication) Direct access to built-in RFID module (transparent mode) Powerful scripting language ISO14443A Mifare Classic 1k & 4k, Mini, DESFire EV1, Plus S&X, Pro X, SmartMX, Ultralight, Ultralight C, SLE44R35, SLE66Rxx (my-d move)2), Legic Advant1), PayPass1) ISO14443B Calypso2), CEPAS2), HID iCLASS1), Moneo2), PicoPass1), SRI512, SRT512, SRI4K, SRIX4K ISO18092 / NFC NFCIP-1: Active and passive communication mode; Peer-to-Peer3); NFC Forum Tag Type 1-4 Sony FeliCa1) CE, R&TTE, RoHS-II compliant, FCC, IC, VCCI Approximately 15g (without housing) ART13791 ART13529 ART13607 ART13861 ART13862 UID only - read/write on request 3) On request only Accessories Order Code ART13512 Snap-in holder for TWN3/TWN4 desktop ART11493 2.0m USB Type A cable for TWN3/TWN4 OEM PCB ART12240 2.0m RS232 DSUB 9 DC cable for TWN3/TWN4 OEM PCB Order Code ART14712 Europe ART14713 USA ART14714 AUSTRALIA AC Wall Adapter ART14715 UK Drawing/Pin Out Refer to document DS_TWN3 Reader Family Pinouts Pinning Elatec reserves the right to change any information or data in this document without prior notice. The distribution and the update of this document is not controlled. Elatec declines all responsibility for the use of product with any other specifications but the ones mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification © 2013 Elatec GmbH – DocRev3 – 03/2013 Elatec GmbH Lilienthalstr. 3 82178 Puchheim Germany Phone: Fax: +49 89 5529961 0 +49 89 5529961 29 [email protected] www.elatec-rfid.com