Nomenclature Guide 5962 SMD/DSCC - QML Types 5962 - XXXXX 0X X X X SMD ID NUMBER (Does Not Change) (ID Not Applicable in Earlier DSCC Items) TOTAL DOSE DESIGNATOR -: Non-Rad Hard M: 3 krad (Si) D: 10 krad (Si) R: 100 krad (Si) F: 300 krad (Si) DRAWING NUMBER (DSCC and SMD) DEVICE TYPE (Paragraph 1.2.1 Of SMD/DSCC Drawing) DEVICE CLASS DESIGNATOR (If Applicable) Q: QML Class Q (MIL-PRF-38535) M: QML Class B (MIL-STD-883) V: QML Class V, (MIL-PRF-38535) N: Non-Traditional Packages and Temp Ranges (i.e., Plastic Packages, -40°C to +85°C Temperature Range) T: QML Class T, Star*Lite Flow CASE OUTLINE Case Outlines are Listed in the Specific SMD and Detailed in MIL-STD-1835, Section 4. LEAD FINISH A: Solder Dip C: Gold NOTE: Nomenclature Per MIL-PRF-38535 1 www.intersil.com 1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas Inc. 2011. All Rights Reserved Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries. All other trademarks mentioned are the property of their respective owners