ACS08MS Radiation Hardened Quad 2-Input AND Gate July 1998 Features Description • QML Qualified Per MIL-PRF-38535 Requirements The Radiation Hardened ACS08MS is a Quad 2-Input AND Gate. For each gate, a HIGH level on both the A and B inputs results in a HIGH level on the Y output. A LOW level on either the A or B input results in a LOW level on the Y output. All inputs are buffered and the outputs are designed for balanced propagation delay and transition times. • 1.25Micron Radiation Hardened SOS CMOS • Radiation Environment - Latch-up Free Under any Conditions - Total Dose . . . . . . . . . . . . . . . . . . . . . . 3 x 105 RAD(Si) - SEU Immunity . . . . . . . . . . . <1 x 10-10 Errors/Bit/Day - SEU LET Threshold . . . . . . . . . . . >100MeV/(mg/cm2) The ACS08MS is fabricated on a CMOS Silicon on Sapphire (SOS) process, which provides an immunity to Single Event Latch-up and the capability of highly reliable performance in any radiation environment. These devices offer significant power reduction and faster performance when compared to ALSTTL types. • Input Logic Levels . . .VIL = (0.3)(VCC), VIH = (0.7)(VCC) • Output Current . . . . . . . . . . . . . . . . . . . . . . . ±8mA (Min) • Quiescent Supply Current. . . . . . . . . . . . . 100µA (Max) Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed below must be used when ordering. • Propagation Delay . . . . . . . . . . . . . . . . . . . . .15ns (Max) Applications Detailed Electrical Specifications for the ACS08 are contained in SMD 5962-95651. A “hot-link” is provided on our homepage with instructions for downloading. www.intersil.com/data/sm/index.asp • High Speed Control Circuits • Sensor Monitoring • Low Power Designs Ordering Information ORDERING NUMBER TEMP. RANGE (oC) INTERNAL MARKETING NUMBER 5962F9565101VCC ACS08DMSR ACS08D/SAMPLE ACS08D/SAMPLE 5962F9565101VXC ACS08KMSR ACS08K/SAMPLE 5962F9565101V9A PACKAGE DESIGNATOR -55 to 125 14 Ld SBDIP CDIP2-T14 25 14 Ld SBDIP CDIP2-T14 -55 to 125 14 Ld Flatpack CDFP4-F14 ACS08K/SAMPLE 25 14 Ld Flatpack CDFP4-F14 ACS08HMSR 25 Die N/A Pinouts ACS08 (SBDIP) TOP VIEW ACS08 (FLATPACK) TOP VIEW A1 1 14 VCC A1 1 14 VCC B1 2 13 B4 B1 2 13 B4 Y1 3 12 A4 Y1 3 12 A4 A2 4 11 Y4 B2 5 10 B3 Y2 6 9 A3 GND 7 8 Y3 A2 4 11 Y4 B2 5 10 B3 Y2 6 9 A3 GND 7 8 Y3 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999 1 File Number 3993.1 ACS08MS Die Characteristics PASSIVATION DIE DIMENSIONS: Type: Phosphorous Silicon Glass (PSG) Thickness: 1.30µm ±0.15µm Size: 2390µm x 2390µm (94 mils x 94 mils) Thickness: 525µm ±25µm (20.6 mils ±1 mil) Bond Pad: 110µm x 110µm (4.3 mils x 4.3 mils) SPECIAL INSTRUCTIONS: METALLIZATION: Al Metal 1 Thickness: 0.7µm ±0.1µm Metal 2 Thickness: 1.0µm ±0.1µm Bond VCC First ADDITIONAL INFORMATION: Worst Case Density: <2.0 x 105 A/cm2 Transistor Count: 176 SUBSTRATE POTENTIAL: Unbiased Insulator Metallization Mask Layout ACS08MS B1 A1 VCC B4 Y1 A4 A2 Y4 NC NC B2 B3 Y2 GND Y3 A3 All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (321) 724-7000 FAX: (321) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 2 ASIA Intersil (Taiwan) Ltd. Taiwan Limited 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029