K-BAND LOW NOISE AMPLIFIER LNA-192-212-XXX 19.2 GHz - 21.2 GHz This Ka-Band Low Noise Amplifier (LNA) is designed to meet the extended K-Band Satcom bands and is ideally suited for airborne or SWaP applications where size weight and power are critical. The unit has an industry beating 1.3 dB Noise figure over the full 2 GHz Bandwidth. With a total weight of 0.5 lbs and small size the unit is ideal for todays integrated light weight KaBand terminals. Other products that may be of interest include: Low Noise Block Converters (Ku & X-Band) Block Up Converters (Ku & X-Band) Low Noise Amplifiers (Ku & K-Band) Solid State Power Amplifiers (X, Ku & Ka-Band) Synthesizers (L, C or X-Band) TELEDYNE MICROWAVE SOLUTIONS Everywhereyoulook TM 1274 Terra Bella Avenue, Mountain View, CA 94043 Tel: 1.800.832.6869 or +1.650.962.6944 Fax: +1.650.962.6845 www.teledynemicrowave.com [email protected] K-Band Low Noise Amplifier 19.2 GHz - 21.2 GHz Specifications: Parameter Value Noise Figure @25 C 95 K (1.3 dB) Operating Frequency Range 19.2 to 21.2 GHz min/max O O Operating Temperature Range -54 to +95 °C min/max Small-Signal Gain 40 dB min 44 dB max P1dB +15 dBm min 3rd OIP 23 dBm Input Overdrive 18 dBm In-Band Spurious -35 dBc max Out of Band Spurious -35 dBc max Group Delay variation over any 10 MHz 0.1 nsec max AM/PM Conversion 0.1 O/dB max DC Supply Voltage 8-12 VDC max Current 50 mA Output Connector 2.92mm (f) Input Waveguide WR-42 Input / Output VSWR 1.4:1 Humidity 100% Size 1.0” X 2” X 0.5” Weight 0.5 lbs max 4X #4-40 UNC X .31 DP. HELICOIL .670 .335 WR-42 WAVEGUIDE SURFACE (CHEM FILM) 1.298 .270 .54 .649 CL .105 .62 .615 .320 .640 J1 CL 1.020 K-BAND LNA-192-212-011 J2 1.230 GND .515 +12V C'BORE Ø.156 X .435 DP 1.030 .25 RF OUT 2.92mm FEMALE FIELD REPLACEABLE 1.17 .67 1.03 .87 .54 2.69 MOUNTING SURFACE (CHEM FILM) 06/13