SiPLGA Package 100-Lead (16mm × 16mm) 6.000 5.500 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0.000 0.500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000 (Reference LTC DWG# 05-08-1802 Rev A) 26 25 15.90 – 16.10 4 X Y PAD 1 CORNER 3.1245 1.045 1.045 3.1245 51 3.1245 3.1245 1.045 1.045 15.9 – 16.1 3.1245 1.045 3.1245 3.1245 1.045 1.045 3.1245 1.045 75 1 100 76 DETAILED PAD LAYOUT 1.93 – 2.13 0.315 – 0.385 0.218 – 0.278 (b) (2X) TOP VIEW 11.90 – 12.10 eee M X Y 26 50 ROWS AF 0.05 – 0.15 25 51 1.120 – 1.180 1.313 – 1.383 PAD AD AB Y V 0.5 BASIC DETAIL B T R 11.90 – 12.10 N L J MOLD CAP SUBSTRATE G E 0.33 – 0.43 75 DETAIL B 1 bbb Z 5 1.60 – 1.70 Z 6.000 5.500 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0.000 0.500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000 aaa Z (2X) 50 C AE AC AA W U S P M K H F D B A 100 DETAIL A DETAIL A COLUMNS 1 2 76 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 BOTTOM VIEW NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994 2. ALL DIMENSIONS ARE IN MILLIMETERS 3 LAND DESIGNATION PER JESD MO-222, SPP-010 4 DETAILS OF PAD #1 IDENTIFIER ARE OPTIONAL, BUT MUST BE LOCATED WITHIN THE ZONE INDICATED. THE PAD #1 IDENTIFIER MAY BE EITHER A MOLD OR MARKED FEATURE 5 PRIMARY DATUM -Z- IS SEATING PLANE SYMBOL TOLERANCE aaa 0.10 bbb 0.10 eee 0.03 SiPLGA 100 1212 REV A 6. DIMENSION (b) IS MEASURED AT THE MAXIMUM LAND WIDTH, PARALLEL TO PRIMARY DATUM -Z7. TOTAL NUMBER OF PADS: 104 TOTAL (100 PERIPHERAL + 4 COMMON CENTER) 8 ! PACKAGE ROW AND COLUMN LABELING MAY VARY AMONG µModule PRODUCTS. REVIEW EACH PACKAGE LAYOUT CAREFULLY 24 25 3 26 SEE NOTES 8 aaa Z