T PL IA N M CO *R oH S Features Applications ■ Working voltage 3.3 V ■ FireWire, T1/E1, T3/E3 chip side protection ■ SMT - DFN package ■ Digital Visual Interface (DVI) ■ Low capacitance - 4 pF ■ Ethernet 10/100/1000 Base T ■ IEC 61000-4-2 (ESD) ■ High speed port protection ■ IEC 61000-4-4 (EFT) ■ Portable electronics ■ IEC 61000-4-5 (Surge) CDDFN10-3304N - TVS/Steering Diode Array General Information The CDDFN10-3304N device provides ESD, EFT and Surge protection for high speed data ports meeting IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT) and IEC 61000-4-5 (Surge) requirements. The Transient Voltage Suppressor array, protecting up to 4 data lines, offers a Working Peak Voltage of 3.3 V. Pin 5 Pin 1 The DFN-10 packaged device will mount directly onto the industry standard DFN-10 footprint. Bourns® Chip Diodes are easy to handle with standard pick and place equipment. Pin 3 Pin 7 Pin 9 GND Absolute Maximum Ratings, TA = 25 °C (Unless Otherwise Noted) Parameter Symbol CDDFN10-3304N Unit Peak Pulse Power (tp = 8/20 µs) (NOTE 1) PPK 450 W Peak Pulse Current (tp = 8/20 µs) per IEC 61000-4-5 IPP 25 A Storage Temperature TSTG -55 to +150 ºC Operating Temperature TOPR -55 to +125 ºC ESD Protection per IEC 61000-4-2 Contact Discharge Air Discharge 30 max. 30 max. EFT Protection per IEC 61000-4-4 @ 5/50 ns 40 min. kV kV A Notes: 1. See Peak Pulse Power vs. Pulse Time. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Breakdown Voltage @ 1 mA Max. Unit V VWM 3.3 V Leakage Current1 @ VWM ID 1 µA Clamping Voltage2 @ IP = 5 A 8/20 µs VC 15 V Clamping Voltage2 @ IP = 15 A 8/20 µs VC 18 V Clamping Voltage2 @ IP = 20 A 8/20 µs VC 20 V Junction Capacitance2 @ 0 V 1 MHz CD 4.0 5.0 pF Junction Capacitance3 @ 0 V 1 MHz CIO 1.5 Working Peak Voltage Symbol VBR Min. 3.9 Typ. Note 1: Pin 5 to ground. Note 2: Pin 1,3,7 or 9 to ground. Note 3: Between Pin 1,3,7 and 9. *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. pF CDDFN10-3304N - TVS/Steering Array 3312 - 2 mm SMD TrimmingDiode Potentiometer Rating & Characteristic Curves Pulse Waveform IPP – Peak Pulse Current (% of IPP) Peak Pulse Power vs. Pulse Time PPP – Peak Pulse (W) 10,000 450 W, 8/20 µs Waveform 1000 100 10 0.01 120 Test Waveform Parameters tt = 8 µs td = 20 µs tt 100 80 et 60 40 td = t|IPP/2 20 0 1 10 100 1,000 0 10,000 10 5 td – Pulse Duration (µs) Clamping Voltage vs Peak Pulse Current 20 25 30 Clamping Voltage vs Peak Pulse Current 22 24 22 20 Any I/O Pin to GND 18 Any I/O Pin to Another I/O Pin 20 18 16 Clamping Voltage (V) Clamping Voltage (V) 15 t – Time (µs) 14 12 10 8 6 Waveform Parameters: tr = 8 µs td = 20 µs 4 2 16 14 12 10 8 Waveform Parameters: tr = 8 µs td = 20 µs 6 4 2 0 0 0 5 10 15 20 25 0 5 10 Peak Pulse Current (A) 15 20 Peak Pulse Current (A) Power Derating Curve Typical Voltage vs. Capacitance 4.5 4.0 Any I/O Pin to GND 100 Peak Pulse Power 8/20 µs 3.0 80 2.5 % of Rated Power Input Capacitance (pF) 3.5 2.0 1.5 1.0 0.0 0.0 40 20 VDD = Floating, GND = 0 V, f = 1 MHz, T = 25 °C 0.5 60 Average Power 0 0.5 1.0 1.5 2.0 Input Voltage (V) 2.5 3.0 3.5 0 25 50 75 100 125 TL - Lead Temperature (°C) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 150 25 CDDFN10-3304N - TVS/Steering Diode Array 3312 - 2 mm SMD Trimming Potentiometer Product Dimensions Recommended Footprint This is a molded DFN10 package with lead free Nickel-PaladiumGold (Ni/Pd/Au) on the lead frame. It has a flammability rating of UL 94V-0. 0.30 (.012) 0.50 (.020) 3.15 (.124) 2.45 - 2.55 (0.096 - 0.100) 1.26 (.050) 1.85 (.073) 2.50 (.100) 2.45 - 2.55 (0.096 - 0.100) PIN 1 INDICATOR 0.65 (.026) 0.50 - 0.60 (0.020 - 0.024) 2.05 (.081) DIMENSIONS: MM (INCHES) Typical Part Marking CDDFN10-3304N ........................................................................334 Pin Out 0.152 (0.006) 0.20 - 0.30 (0.008 - 0.012) 0.50 (0.020) PIN 1 0.2 R (.008) 1.15 - 1.25 (0.045 - 0.049) CH1 1 10 NC NC 2 9 CH2 CH3 3 8 NC NC 4 7 CH4 VDD 5 6 NC GND (CENTER TAB) TOP VIEW 1.85 - 1.95 (0.073 - 0.077) 0.35 - 0.45 (0.014 - 0.018) 2.10 - 2.20 (0.083 - 0.087) How to Order CD DFN10 - 33 04 N Common Diode Chip Diode Package DFN10 = DFN-10 Package Working Peak Voltage 33 = 3.3 VRWM (Volts) Number of Lines 04 = 4 Data Lines Pin Function 1 I/O 2 N.C. 3 I/O 4 N.C. 5 VCC 6 N.C. 7 I/O 8 N.C. 9 I/O 10 N.C. CENTER TAB GROUND Suffix N = Low Capacitance Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. CDDFN10-3304N - TVS/Steering Diode Array Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole Pin 1 Location 120 ° F D2 W B D1 D P A Trailer ....... ....... End C Device ....... ....... Leader ....... ....... ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) 10 pitches (min.) Direction of Feed Item Symbol DFN-10 Carrier Width A 2.80 ± 0.10 (0.110 ± 0.004) Carrier Length B 2.85 ± 0.10 (0.112 ± 0.004) Carrier Depth C 1.00 ± 0.05 (0.039 ± 0.002) Sprocket Hole d 1.50 +0.10/-0 (0.059 +0.004/-0) Reel Outside Diameter D 180 ± 3 (7.087 ± 0.118) Reel Inner Diameter D1 Feed Hole Diameter D2 13.00 +0.50/-0.20 (0.512 +0.020/-0.008) Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position F 5.50 ± 0.05 (0.217 ± 0.002) Punch Hole Pitch P 4.00 ± 0.10 (0.157 ± 0.004) Sprocket Hole Pitch P0 4.00 ± 0.10 (0.157 ± 0.004) Embossment Center P1 2.00 ± 0.05 (0.079 ± 0.002) T 0.60 MAX. (0.024) Tape Width W 12.3 MAX. (0.484) Quantity per Reel W1 -- Devices are packed in accordance with EIA standard RS-481-A. 50.0 MIN. (1.969) Overall Tape Thickness Reel Width MM (INCHES) 18.4 MAX. (0.724) 3000 REV. 06/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.