NID7032revK

Features
■ Six 7032 Models designed to accept all Bourns® station protectors
■ Accepts all other manufacturers’ protection of similar design
■ Optional sealed switching jacks with Insulation Displacement Connectors (IDC)
■
Listed per UL 497 (File: E53117)
7032 Series - Network Interface Device
The Model 7032 NID is designed to allow service providers the capacity to terminate and add protected service pairs as needed.
The 7032 NID is available in pair counts of 1 through 100. Enclosures are manufactured of high-impact resistant, ultra-violetdesensitized, flame retardant plastic (50 and 100 pair models are 18 gauge rust resistant zinc-coated steel, with twenty-five pair
available in both plastic and steel). This 7032 is completely subscriber lockable with Telco override and subscriber friendly
termination posts for safe and secure operation.
How to Order
7032 - XX - X X X - X XX
Model Number Designator
Number of Lines
06, 12, 25, 50, 100
Station Protector Options
D 1 = 455HS-MSP (2377-45-HS) Voice/Data/DSL (UL,cUL)
U 3 = 455HS-MSP (2377-45-HS-IDC) Voice/DSL/Data (UL,cUL)
Z 1 = 455HS-BC* (2377-45-BC) Balance-Sensitive DSL (UL, cUL)
W 3 = 455HS-BC* (2377-45-BC-IDC) Balance-Sensitive DSL (UL, cUL)
V 3 = 455-MSP-TBU (2377-45-HS-TBU) MSP w/TBU® Protector (UL, cUL)
Q 3 = 455BC-MSP-TBU* (2377-45-BC-TBU) Balance-Sensitive MSP w/TBU® Protector (UL, cUL)
E 2 = 155HS-MSP (2378-35-HS) Voice/DSL/Data (UL, cUL)
Y 2 = 155HS-BC* (2378-35-BC) Balance-Sensitive DSL (UL, cUL)
G = 155G (2378-35-G) Balanced GDT, No Back-Up-Gap (UL, cUL)
K = 356G (2377-35-G) Balanced GDT, No Back-Up-Gap (UL, cUL)
R 3 = 356G (2377-35-G-IDC) Balanced GDT, No Back-Up-Gap (UL, cUL)
T
O
= Tii355M
= No Station Protectors (Not available with DSL configurations)
*For DSL systems requiring capacitive balance within 1 pF.
Note 1 = Digi.Guard - 356 size, RUS Maximum Duty
Note 2 = Digi.Guard II - 125 size, RUS Heavy Duty
Note 3 = Insulation Displacement Connectors (IDC)
Enclosure Size and Construction (see table for dimensions)
A = 6 Pair Capacity (Plastic) E = 100 Pair Capacity (Steel)
B = 12 Pair Capacity (Plastic) P = 1/2 Inch Plywood - no enclosure
C = 25 Pair Capacity (Steel) V = 25 Pair Capacity (Plastic)
D = 50 Pair Capacity (Steel)
Special Options
S = Sealed Switching Jack w/IDC (85122-T-IDC)
F = Sealed Switching Jack 4-Post (85122-T4)
J = Modular Jacks (85122)
B = Expansion Bridge w/Binding Posts (85122-B)
I = Expansion Bridge w/IDC (85122-IDC)
X = Dual Ground Plate
O = No options
POTS Splitter Options †
P(nn) = (1) 3610A2, ADSL 2+ POTS Splitter, UL Listed (“nn” indicates the number of DSL Lines)
P(nn)-I = (1) 3610A2-IDC, ADSL2+ POTS Splitter w/IDC, UL Listed (“nn” indicates the number of DSL Lines)
V(nn) = (1) 3610V2, VDSL 2 POTS Splitter, UL Listed (“nn” indicates the number of DSL Lines)
V(nn)-I = (1) 3610V2-IDC, VDSL2 POTS Splitter w/IDC, UL Listed (“nn” indicates the number of DSL Lines)
W(nn)-I = (1) 3622V2-IDC, VDSL2 POTS Splitter w/IDC, Subscriber Side, RJ11, UL Listed (“nn” indicates the number of DSL Lines)
†
DSL Configuration Note:
7032 NIDs ordered with POTS splitter options must be ordered with Special Option F (4-post sealed switching jacks)
or Special Option S (sealed switching jack w/IDC). Example: 7032-12-DCF-P12
Number of DSL Lines
03, 06, 12, 25, 50
To add lines, use station protector + upgrade kit 85003 (old style) or:
85122
Standard Jack (Not available with DSL configurations)
85122-T4
Sealed Switching Jack, 4-post
85122-T-IDC Sealed Switching Jack w/IDC
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
7032 Series - Network Interface Device
Product Dimensions
Enclosure
Size
Pair
(Max.)
DSL
(Max.)
A
06
03
B
12
06
C
25
12
D
50
25
E
100
50
V
25
12
High
279.4
(11.0)
444.5
(17.5)
431.8
(17.0)
914.4
(36.0)
914.4
(36.0)
469.9
(18.5)
Dimensions
Wide
279.4
(11.0)
279.4
(11.0)
406.4
(16.0)
482.6
(19.0)
508
(20.0)
444.5
(17.5)
RJ11 Subscriber Bridges
85122
Standard Loop
Deep
101.6
(4.0)
127
(5.0)
76.2
(3.0)
114.3
(4.5)
177.8
(7.0)
139.7
(5.5)
DIMENSIONS:
MM
(INCHES)
Expansion Bridges
85122-T4*
Internal Switch - 4 Lugs
85122-IDC
Insulation Displacement
Connectors
TR
TR
1
2
TR
TR
3
4
85122-B
Binding Post
85122-T-IDC*
Sealed Switch Jack w/IDC
*Includes environmental sealant and closed-cell foam gasket.
Mounting Brackets (Available Separately)
Mounting brackets 85111-A for 7032-xx-xAx and 85111-B for 7032-xx-xBx are available separately. These accessories provide
external mounting tabs for wall or pole mounting.
85111-A
for 7032-xx-xAx
85111-B
for 7032-xx-xBx
REV. P 04/15
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.